* Start implementing a new shader translator
* Fix shift instructions and a typo
* Small refactoring on StructuredProgram, move RemovePhis method to a separate class
* Initial geometry shader support
* Implement TLD4
* Fix -- There's no negation on FMUL32I
* Add constant folding and algebraic simplification optimizations, nits
* Some leftovers from constant folding
* Avoid cast for constant assignments
* Add a branch elimination pass, and misc small fixes
* Remove redundant branches, add expression propagation and other improvements on the code
* Small leftovers -- add missing break and continue, remove unused properties, other improvements
* Add null check to handle empty block cases on block visitor
* Add HADD2 and HMUL2 half float shader instructions
* Optimize pack/unpack sequences, some fixes related to half float instructions
* Add TXQ, TLD, TLDS and TLD4S shader texture instructions, and some support for bindless textures, some refactoring on codegen
* Fix copy paste mistake that caused RZ to be ignored on the AST instruction
* Add workaround for conditional exit, and fix half float instruction with constant buffer
* Add missing 0.0 source for TLDS.LZ variants
* Simplify the switch for TLDS.LZ
* Texture instructions related fixes
* Implement the HFMA instruction, and some misc. fixes
* Enable constant folding on UnpackHalf2x16 instructions
* Refactor HFMA to use OpCode* for opcode decoding rather than on the helper methods
* Remove the old shader translator
* Remove ShaderDeclInfo and other unused things
* Add dual vertex shader support
* Add ShaderConfig, used to pass shader type and maximum cbuffer size
* Move and rename some instruction enums
* Move texture instructions into a separate file
* Move operand GetExpression and locals management to OperandManager
* Optimize opcode decoding using a simple list and binary search
* Add missing condition for do-while on goto elimination
* Misc. fixes on texture instructions
* Simplify TLDS switch
* Address PR feedback, and a nit
* Renaming part 1
* Renaming part 2
* Renaming part 3
* Renaming part 4
* Renaming part 5
* Renaming part 6
* Renaming part 7
* Renaming part 8
* Renaming part 9
* Renaming part 10
* General cleanup
* Thought I got all of these
* Apply #595
* Additional renaming
* Tweaks from feedback
* Rename files
* Add optimizations related to caller/callee saved registers, thread synchronization and disable tier 0
* Refactoring
* Add a config entry to enable or disable the reg load/store opt.
* Remove unnecessary register state stores for calls when the callee is know
* Rename IoType to VarType
* Enable tier 0 while fixing some perf issues related to tier 0
* Small tweak -- Compile before adding to the cache, to avoid lags
* Add required config entry
* Implement ARM exclusive load/store with compare exchange insts, and enable multicore by default
* Fix comment typo
* Support Linux and OSX on MemoryAlloc and CompareExchange128, some cleanup
* Use intel syntax on assembly code
* Adjust identation
* Add CPUID check and fix exclusive reservation granule size
* Update schema multicore scheduling default value
* Make the cpu id check code lower case aswell
* Logging: Refactor log targets into Ryujinx.Common
* Logger: Implement JSON Log Target
* Logger: Optimize Console/File logging targets
Implement a simple ObjectPool to pool up StringBuilders to avoid causing excessive GCing of gen1/2 items when large amounts of log entries are being generated.
We can also pre-determine the async overflow action at initialization time, allowing for an easy optimization in the message enqueue function, avoiding a number of comparisons.
* Logger: Implement LogFormatters
* Config: Refactor configuration file and loading
* Config: Rename to .jsonc to avoid highlighting issues in VSC and GitHub
* Resolve style nits
* Config: Resolve incorrect default key binding
* Config: Also update key binding default in schema
* Tidy up namespace imports
* Config: Update CONFIG.md to reflect new Config file
* Refactor Ryujinx.Common and HLE Stub Logging
* Resolve review comments
* Rename missed loop variable
* Optimize PrintStub logging function
* Pass the call-sites Thread ID through to the logger
* Remove superfluous lock from ConsoleLog
* Process logged data objects in the logger target
Pass the data object all the way to the output logger targets, to allow them to "serialize" this in whatever appropriate format they're logging in.
* Use existing StringBuilder to build the properties string
* Add a ServiceNotImplemented Exception
Useful for printing debug information about unimplemented service calls
* Resolve Style Nits
* Resolve Merge Issues
* Fix typo and align declarations
* Initial implementation of KProcess
* Some improvements to the memory manager, implement back guest stack trace printing
* Better GetInfo implementation, improve checking in some places with information from process capabilities
* Allow the cpu to read/write from the correct memory locations for accesses crossing a page boundary
* Change long -> ulong for address/size on memory related methods to avoid unnecessary casts
* Attempt at implementing ldr:ro with new KProcess
* Allow BSS with size 0 on ldr:ro
* Add checking for memory block slab heap usage, return errors if full, exit gracefully
* Use KMemoryBlockSize const from KMemoryManager
* Allow all methods to read from non-contiguous locations
* Fix for TransactParcelAuto
* Address PR feedback, additionally fix some small issues related to the KIP loader and implement SVCs GetProcessId, GetProcessList, GetSystemInfo, CreatePort and ManageNamedPort
* Fix wrong check for source pages count from page list on MapPhysicalMemory
* Fix some issues with UnloadNro on ldr:ro
* Audio: Implement libsoundio as an alternative audio backend
libsoundio will be preferred over OpenAL if it is available on the machine. If neither are available, it will fallback to a dummy audio renderer that outputs no sound.
* Audio: Fix SoundIoRingBuffer documentation
* Audio: Unroll and optimize the audio write callback
Copying one sample at a time is slow, this unrolls the most common audio channel layouts and manually copies the bytes between source and destination. This is over 2x faster than calling CopyBlockUnaligned every sample.
* Audio: Optimize the write callback further
This dramatically reduces the audio buffer copy time. When the sample size is one of handled sample sizes the buffer copy operation is almost 10x faster than CopyBlockAligned.
This works by copying full samples at a time, rather than the individual bytes that make up the sample. This allows for 2x or 4x faster copy operations depending on sample size.
* Audio: Fix typo in Stereo write callback
* Audio: Fix Surround (5.1) audio write callback
* Audio: Update Documentation
* Audio: Use built-in Unsafe.SizeOf<T>()
Built-in `SizeOf<T>()` is 10x faster than our `TypeSize<T>` helper. This also helps reduce code surface area.
* Audio: Keep fixed buffer style consistent
* Audio: Address styling nits
* Audio: More style nits
* Audio: Add additional documentation
* Audio: Move libsoundio bindings internal
As per discussion, moving the libsoundio native bindings into Ryujinx.Audio
* Audio: Bump Target Framework back up to .NET Core 2.1
* Audio: Remove voice mixing optimizations.
Leaves Saturation optimizations in place.
* Change naming convention for Ryujinx project
* Change naming convention for ChocolArm64 project
* Fix NaN
* Remove unneeded this. from Ryujinx project
* Adjust naming from new PRs
* Name changes based on feedback
* How did this get removed?
* Rebasing fix
* Change FP enum case
* Remove prefix from ChocolArm64 classes - Part 1
* Remove prefix from ChocolArm64 classes - Part 2
* Fix alignment from last commit's renaming
* Rename namespaces
* Rename stragglers
* Fix alignment
* Rename OpCode class
* Missed a few
* Adjust alignment
* support reading control data
* show game info on titlebar
* use first language is default is not available
* use seperate language enums for titles
* fix hex display
* Started to rewrite the thread scheduler
* Add a single core-like scheduling mode, enabled by default
* Clear exclusive monitor on context switch
* Add SetThreadActivity, misc fixes
* Implement WaitForAddress and SignalToAddress svcs, misc fixes
* Misc fixes (on SetActivity and Arbiter), other tweaks
* Rebased
* Add missing null check
* Rename multicore key on config, fix UpdatePriorityInheritance
* Make scheduling data MLQs private
* nit: Ordering
* Initial Framerate limit implementation
* use seperate event for limiter
* check for vsync signal after queue up framebuffer
* removed ingame toggle
* fix nits
* Move GPU LLE emulation from HLE to Graphics
* Graphics: Move Gal/Texture to Texture
* Remove Engines/ directory and namespace
* Use tables for image formats
* Abstract OpCode decoding
* Simplify image table
* Do not leak Read* symbols in TextureReader
* Fixups
* Rename IGalFrameBuffer -> IGalRenderTarget
* Remove MaxBpp hardcoded value
* Change yet again texture data and add G8R8 flipping
* Rename GalFrameBufferFormat to GalSurfaceFormat
* Unident EnsureSetup in ImageHandler
* Add IsCompressed
* Address some feedback
* Logging: Asynchronously log messages to the Console window
Writing to the Console blocks until the write completes. This has the potential to block any code path that logs to the application logger.
By queuing up log messages in an asynchronous queue and returning without blocking, we can speed up code paths that heavily log to the console (for example stubbed services like ServiceHid).
From testing this results in a roughly 8% time decrease between Ryujinx startup and the splash screen in Super Mario Odyssey on my system - 00:03:19.591 down to
00:03:04.354. Depending on your system, YMMV.
* Logging: Resolve code styling issues
* Some style fixes and nits on ITimeZoneService
* Remove some unneeded usings
* Remove the Ryujinx.HLE.OsHle.Handles namespace
* Remove hbmenu automatic load on process exit
* Rename Ns to Device, rename Os to System, rename SystemState to State
* Move Exceptions and Utilities out of OsHle
* Rename OsHle to HOS
* Rename OsHle folder to HOS
* IManagerDisplayService and ISystemDisplayService style fixes
* BsdError shouldn't be public
* Add a empty new line before using static
* Remove unused file
* Some style fixes on NPDM
* Exit gracefully when the application is closed
* Code style fixes on IGeneralService
* Add 0x prefix on values printed as hex
* Small improvements on finalization code
* Move ProcessId and ThreadId out of AThreadState
* Rename VFs to FileSystem
* FsAccessHeader shouldn't be public. Also fix file names casing
* More case changes on NPDM
* Remove unused files
* Move using to the correct place on NPDM
* Use properties on KernelAccessControlMmio
* Address PR feedback
* Keep track mapped buffers with fixed offsets
* Started rewriting the memory manager
* Initial support for MapPhysicalMemory and UnmapPhysicalMemory, other tweaks
* MapPhysicalMemory/UnmapPhysicalMemory support, other tweaks
* Rebased
* Optimize the map/unmap physical memory svcs
* Integrate shared font support
* Fix address space reserve alignment
* Some fixes related to gpu memory mapping
* Some cleanup
* Only try uploading const buffers that are really used
* Check if memory region is contiguous
* Rebased
* Add missing count increment on IsRegionModified
* Check for reads/writes outside of the address space, optimize translation with a tail call
This commit implements the argv config key in Ryujinx (by creating a temporary copy of the homebrew executable in the sdmc VFS) to make it possible
to load libnx's "romfs" files.
This commit also call Os.Dispose in Ns.OnFinish to dispose all resources when exiting
* Loop GLScreen with custom method
* Fix deadlocks
* Fix screen resizing
* Change event to bool
* Try to fix quitting error
* Set title from main thread
* Queue max 1 vsync, fix high FPS after a slowdown
* Added Basic Controller Support
* Added Extra Configuration Options
Added a GamePad_Enable option and GamePad_Index option
* Revert "Added Extra Configuration Options"
This reverts commit 6cc56bfe7ed473fedf8dfe79c7a888bbe7cfe147.
* Revert "Revert "Added Extra Configuration Options""
This reverts commit 4809e5effe7f54cdb67bc5e2b4f01315ae34efc5.
* Forgot to change the Gamepad Index
* Added Configuration for the A B X Y Buttons
* Added Button Configuration for all other Buttons
* Added Basic Joystick Configuration
* Fixed Joystick Axis Problems
Fixed Joystick Axis Problems when switching around the Joysticks (Left Stick is Right and Right stick is Left)
* Refactored all of the button mapping code
* Changes in compliance with review
* Changes in compliance with review
* Fixed problems in the configuration file with different regions
* Changes in compliance with review
* Call OpenGL functions directly, remove the pfifo thread, some refactoring
* Fix PerformanceStatistics calculating the wrong host fps, remove wait event on PFIFO as this wasn't exactly was causing the freezes (may replace with an exception later)
* Organized the Gpu folder a bit more, renamed a few things, address PR feedback
* Make PerformanceStatistics thread safe
* Remove unused constant
* Use unlimited update rate for better pref
* Add support for events, move concept of domains to IpcService
* Support waiting for KThread, remove some test code, other tweaks
* Use move handle on NIFM since I can't test that now, it's better to leave it how it was
* implement basic frame time stats
* added game frame time
* made performancestatictics class non-static
* report average framerate instead of current framerate
* Refactor HID, fix issues
* Fix on touch screen code with wrong offset
* Don't use magic values
* Replace more magic values with actual variables, fix touch screen coordinates on different window sizes
* Initial pass - fixes IFileSystem OpenFile, implements IFileSystem CreateFile/DeleteFile, fixes IFile Read and implements IFile GetSize/SetSize
* Implement IFileSystem Directory* methods, as well as RenameFile. Add IDirectory, and implement its Read and GetEntryCount methods.
* missing TODO
* hey, this is kinda bad
* Update IDirectory.cs
Fixed :)
* Some cleanups to IDirectory, fix for OpenDirectory on a non-existent directory.
* Item -> Index
* This should work.
* Update IDirectory.cs
Marshalling version
* Make HSessionObj implement IDisposable, so that objects that have handles created to them are disposed when the handles are closed.
* Spelling fix: GenertateObjectId -> GenerateObjectId
