* Ensure descriptor sets are only re-used when all command buffers using it have completed
* Fix some SPIR-V capabilities
* Set update after bind flag if we exceed limits
* Simpler fix for Intel
* Format whitespace
* Make struct readonly
* Add barriers for extra set arrays too
* Report base and extra sets from the backend
* Pass texture set index everywhere
* Key textures using set and binding (rather than just binding)
* Start using extra sets for array textures
* Shader cache version bump
* Separate new commands, some PR feedback
* Introduce new manual descriptor set reservation method that prevents it from being used by something else while owned by an array
* Move bind extra sets logic to new method
* Should only use separate array is MaximumExtraSets is not zero
* Format whitespace
* GPU: Migrate buffers on GPU project, pre-emptively flush device local mappings
Essentially retreading #4540, but it's on the GPU project now instead of the backend. This allows us to have a lot more control + knowledge of where the buffer backing has been changed and allows us to pre-emptively flush pages to host memory for quicker readback. It will allow us to do other stuff in the future, but we'll get there when we get there.
Performance greatly improved in Hyrule Warriors: Age of Calamity. Performance notably improved in TOTK (average). Performance for BOTW restored to how it was before #4911, perhaps a bit better.
- Rewrites a bunch of buffer migration stuff. Might want to tighten up how dispose stuff works.
- Fixed an issue where the copy for texture pre-flush would happen _after_ the syncpoint.
TODO: remove a page from pre-flush if it isn't flushed after a certain number of copies.
* Add copy deactivation
* Fix dependent virtual buffers
* Remove logging
* Fix format issues (maybe)
* Vulkan: Remove backing swap
* Add explicit memory access types for most buffers
* Fix typo
* Add device local force expiry, change buffer inheritance behaviour
* General cleanup, OGL fix
* BufferPreFlush comments
* BufferBackingState comments
* Add an extra precaution to BufferMigration
This is very unlikely, but it's important to cover loose ends like this.
* Address some feedback
* Docs
* Add support for bindless textures from shader input (vertex buffer)
* Shader cache version bump
* Format whitespace
* Remove cache entries on pool removal, disable for OpenGL
* PR feedback
* rebase
* add methods Ryyjinx.Common EmbeddedResources and SteamUtils
* GAL changes - change SetData() methods and ThreadedTexture commands to use IMemoryOwner<byte> instead of SpanOrArray<byte>
* Ryujinx.Graphics.Texture: change texture conversion methods to return IMemoryOwner<byte> and allocate from ByteMemoryPool
* Ryujinx.Graphics.OpenGL: update ITexture and Texture-like types with SetData() methods to take IMemoryOwner<byte> instead of SpanOrArray<byte>
* Ryujinx.Graphics.Vulkan: update ITexture and Texture-like types with SetData() methods to take IMemoryOwner<byte> instead of SpanOrArray<byte>
* Ryujinx.Graphics.Gpu: update ITexture and Texture-like types with SetData() methods to take IMemoryOwner<byte> instead of SpanOrArray<byte>
* Remove now-unused SpanOrArray<T>
* post-rebase cleanup
* PixelConverter: remove unsafe modifier on safe methods, and remove one unnecessary cast
* use ByteMemoryPool.Rent() in GetWritableRegion() impls
* fix formatting, rename `ReadRentedMemory()` to `ReadFileToRentedMemory()``
* Texture.ConvertToHostCompatibleFormat(): dispose of `result` in Astc decode branch
* Add support for large sampler arrays on Vulkan
* Shader cache version bump
* Format whitespace
* Move DescriptorSetManager to PipelineLayoutCacheEntry to allow different pool sizes per layout
* Handle array textures with different types on the same buffer
* Somewhat better caching system
* Avoid useless buffer data modification checks
* Move redundant bindings update checking to the backend
* Fix an issue where texture arrays would get the same bindings across stages on Vulkan
* Backport some fixes from part 2
* Fix typo
* PR feedback
* Format whitespace
* Add some missing XML docs
* OpenGL: Mask out all color outputs with no fragment shader
This appears to match Vulkan's behaviour, which is needed for stencil shadows in Penny's Big Breakaway. It's far from the only issue, you can try the Full Bindless PR if you want to see it in a more intact state.
* Remove unused member
* WIP barrier batch
* Add store op to image usage barrier
* Dispose the barrier batch
* Fix encoding?
* Handle read and write on the load op barrier.
Load op consumes read accesses but does not add one, as the only other operation that can read is another load.
* Simplify null check
* Insert barriers on program change in case stale bindings are reintroduced
* Not sure how I messed this one up
* Improve location of bindings barrier update
This is also important for emergency deferred clear
* Update src/Ryujinx.Graphics.Vulkan/BarrierBatch.cs
Co-authored-by: Mary Guillemard <thog@protonmail.com>
---------
Co-authored-by: Mary Guillemard <thog@protonmail.com>
This makes IOpenGLContext.HasContext not static and be implementable.
By doing this, we can support more than WGL and WGL.
This also allows the SDL2 headless version to run under Wayland.
Signed-off-by: Mary <mary@mary.zone>
* Replace vendor id lookup with driver name
* Create separate field for driver name, handle OpenGL
* Document changes in VulkanPhysicalDevice.cs
* Always display driver over vendor
* Replace Vulkan 1.2 requirement with VK_KHR_driver_properties
* Remove empty line
* Remove redundant unsafe block
* Apply suggestions from code review
---------
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* Pass MultiRange to BufferManager
* Implement support for multi-range buffers using Vulkan sparse mappings
* Use multi-range for remaining buffers, delete old methods
* Assume that more buffers are contiguous
* Dispose multi-range buffers after they are removed from the list
* Properly init BufferBounds for constant and storage buffers
* Do not try reading zero bytes data from an unmapped address on the shader cache + PR feedback
* Fix misaligned sparse buffer offsets
* Null check can be simplified
* PR feedback
* Change TargetFramework to net8.0
* Disable info messages
* Fix warings
* Disable additional analyzer messages
* Fix typo
* Add whitespace
* Fix ref vs in warnings
* Use explicit [In] on array parameters
* No need to guard Remove with Contains
* Use 'ArgumentOutOfRangeException.ThrowIf...' instead of explicitly throwing a new exception instance
* Bump .NET SDK version
* Enable JsonSerializerIsReflectionEnabledByDefault
* Use 8.0.100 GA release
* Bump System package versions
---------
Co-authored-by: Zoltan Csizmadia <Zoltan.Csizmadia@vericast.com>
* GPU: Add fallback when textureGatherOffsets is not supported.
This PR adds a fallback for GPUs or APIs that don't support an equivalent to the method `textureGatherOffsets`, where each of the 4 gathered texels has an individual offset. This is done by reusing the existing code to handle non-const offsets for texture instructions, though it has also been corrected as there were a few implementation issues.
MoltenVK reports support for this capability, and it didn't error when we initially released the MacOS build, but that has since changed. MVK still reports support, but spirv-cross has been fixed in a way that it _attempts_ to use this capability, but the metal compiler errors since it doesn't exist.
Some other fixes:
- textureGatherOffsets emulation has been changed significantly. It now uses 4 texture sample instructions (not gather), calculates a base texel (i=0 j=0) and adds the offsets onto it before converting into a tex coord. The final result is offset into a texel center, so it shouldn't be subject to interpolation, though this isn't perfect and could have some error with floating point formats with linear sampling. It is subject to texture wrap mode as it should be, which is why texelFetch was not used.
- Maybe gather should be used here with component `w` (i=0, j=0), though this multiplies number of texels fetched by 4... The way it was doing this before _was_ wrong_, but doing it right would avoid issues with texel center precision.
- textureGatherOffset (singular) now performs textureGather with the offset applied to the coords, rather than the slower fallback where each texel is fetched individually.
* Increment shader cache version, remove unused arg
* Use base texture size for gather coord offset.
Implicit LOD for gather is not supported.
* Use 4 texture gathers for offsets emulation
Avoids issues with interpolation at cost of performance
(not sure how bad this is)
* Address Feedback
* Implement vertex and geometry shader conversion to compute
* Call InitializeReservedCounts for compute too
* PR feedback
* Set clip distance mask for geometry and tessellation shaders too
* Transform feedback emulation only for vertex
* Move shuffle handling out of the backend to a transform pass
* Handle subgroup sizes higher than 32
* Stop using the subgroup size control extension
* Make GenerateShuffleFunction static
* Shader cache version bump
* Add workflow to perform automated checks for PRs
* Downgrade Microsoft.CodeAnalysis to 4.4.0
This is a workaround to fix issues with dotnet-format.
See:
- https://github.com/dotnet/format/issues/1805
- https://github.com/dotnet/format/issues/1800
* Adjust editorconfig to be more compatible with Ryujinx code-style
* Adjust .editorconfig line endings to match .gitattributes
* Disable 'prefer switch expression' rule
* Remove naming styles
These are the default rules, so we don't need to override them.
* Silence IDE0060 in .editorconfig
* Slightly adjust .editorconfig
* Add lost workflow changes
* Move .editorconfig comment to the top
* .editorconfig: private static readonly fields should be _lowerCamelCase
* .editorconfig: Remove alignment for declarations as well
* editorconfig: Add rule for local constants
* Disable CA1822 for HLE services
* Disable CA1822 for ViewModels
Bindings won't work with static members, but this issue is silently ignored.
* Run dotnet format for the whole solution
* Check result code of SDL_GetDisplayBounds
* Fix dotnet format style issues
* Add missing trailing commas
* Update Microsoft.CodeAnalysis.CSharp to 4.6.0
Skipping 4.5.0 since it breaks dotnet format
* Restore old default naming rules for dotnet format
* Add naming rule exception for CPU tests
* checks: Include all files before excluding paths
* Fix dotnet format issues
* Check dotnet format version
* checks: Run dotnet format with severity info again
* checks: Disable naming style rules until they won't crash the process anymore
* Remove unread private member
* checks: Attempt to run analyzers 3 times before giving up
* checks: Enable naming style rules again with the new retry logic
* Move support buffer update out of the backends
* Fix render scale init and remove redundant state from SupportBufferUpdater
* Stop passing texture scale to the backends
* XML docs for SupportBufferUpdater
* dotnet format style --severity info
Some changes were manually reverted.
* dotnet format analyzers --serverity info
Some changes have been minimally adapted.
* Restore a few unused methods and variables
* Silence dotnet format IDE0060 warnings
* Address or silence dotnet format IDE1006 warnings
* Fix IDE0090 after rebase
* Address most dotnet format whitespace warnings
* Apply dotnet format whitespace formatting
A few of them have been manually reverted and the corresponding warning was silenced
* Format if-blocks correctly
* Another rebase, another dotnet format run
* Run dotnet format after rebase and remove unused usings
- analyzers
- style
- whitespace
* Add comments to disabled warnings
* Simplify properties and array initialization, Use const when possible, Remove trailing commas
* Start working on disabled warnings
* Address a few disabled IDE0060 warnings
* Silence IDE0060 in .editorconfig
* Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas"
This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e.
* dotnet format whitespace after rebase
* First dotnet format pass
* Address review feedback
* Implement transform feedback emulation for hardware without native support
* Stop doing some useless buffer updates and account for non-zero base instance
* Reduce redundant updates even more
* Update descriptor init logic to account for ResourceLayout
* Fix transform feedback and storage buffers not being updated in some cases
* Shader cache version bump
* PR feedback
* SetInstancedDrawVertexCount must be always called after UpdateState
* Minor typo
* Add support for VK_EXT_depth_clip_control.
* Code review feedback
Minor formatting
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* Check .DepthClipControl to make sure the host actually supports the feature.
* Review feedback: remove Vulkan platform switch, relying on QueryHostSupportsDepthClipControl to drive the behaviour - OpenGL returns true, and any future platforms that don't support the [-1, 1] depth mode can return false for the transformation.
---------
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* WIP texture pre-flush
Improve performance of TextureView GetData to buffer
Fix copy/sync ordering
Fix minor bug
Make this actually work
WIP host mapping stuff
* Fix usage flags
* message
* Cleanup 1
* Fix rebase
* Fix
* Improve pre-flush rules
* Fix pre-flush
* A lot of cleanup
* Use the host memory bits
* Select the correct memory type
* Cleanup TextureGroupHandle
* Missing comment
* Remove debugging logs
* Revert BufferHandle _value access modifier
* One interrupt action at a time.
* Support D32S8 to D24S8 conversion, safeguards
* Interrupt cannot happen in sync handle's lock
Waitable needs to be checked twice now, but this should stop it from deadlocking.
* Remove unused using
* Address some feedback
* Address feedback
* Address more feedback
* Address more feedback
* Improve sync rules
Should allow for faster sync in some cases.
