Name: ===== deepsleep_wake Description: ============ Example that goes to deepsleep and wakes from either the RTC or GPIO. Purpose: ======== This example configures the device to go into a deep sleep mode. Once in deep sleep the RTC peripheral will wake the device every second, check to see if 5 seconds has elapsed and then toggle LED1. Alternatively, it will awake when button 0 is pressed and toggle LED0. The example begins by printing out a banner annoucement message through the UART, which is then completely disabled for the remainder of execution. Text is output to the UART at 115,200 BAUD, 8 bit, no parity. Please note that text end-of-line is a newline (LF) character only. Therefore, the UART terminal must be set to simulate a CR/LF. ******************************************************************************