Name: ===== ios_lram_host Description: ============ Example host used for demonstrating the use of the IOS LRAM. Purpose: ======== This host component runs on one EVB and is used in conjunction with the companion slave example, ios_lram, which runs on a second EVB. The host example uses the ITM SWO to let the user know progress and status of the demonstration. The SWO is configured at 1M baud. Printing takes place over the ITM at 1M Baud. Additional Information: ======================= In order to run this example, a slave device (e.g. a second EVB) must be set up to run the companion example, ios_lram. The two boards can be connected using fly leads between the two boards as follows. Pin connections for the I/O Master board to the I/O Slave board. SPI: HOST (ios_lram_host) SLAVE (ios_lram) -------------------- ---------------- GPIO[10] GPIO Interrupt (slave to host) GPIO[4] GPIO interrupt GPIO[5] IOM0 SPI SCK GPIO[0] IOS SPI SCK GPIO[7] IOM0 SPI MOSI GPIO[1] IOS SPI MOSI GPIO[6] IOM0 SPI MISO GPIO[2] IOS SPI MISO GPIO[11] IOM0 SPI nCE GPIO[3] IOS SPI nCE GND GND I2C: HOST (ios_lram_host) SLAVE (ios_lram) -------------------- ---------------- GPIO[10] GPIO Interrupt (slave to host) GPIO[4] GPIO interrupt GPIO[5] IOM0 I2C SCL GPIO[0] IOS I2C SCL GPIO[6] IOM0 I2C SDA GPIO[1] IOS I2C SDA GND GND ******************************************************************************