Name:
=====
ios_lram
Description:
============
Example slave used for demonstrating the use of the IOS lram.
Purpose:
========
This slave component runs on one EVB and is used in conjunction with
the companion host example, ios_lram_host, which runs on a second EVB.
Printing takes place over the ITM at 1M Baud.
Additional Information:
=======================
In order to run this example, a host device (e.g. a second EVB) must be set
up to run the host example, ios_lram_host. The two boards can be connected
using fly leads between the two boards as follows.
Pin connections for the I/O Master board to the I/O Slave board.
SPI:
HOST (ios_lram_host) SLAVE (ios_lram)
-------------------- ----------------
GPIO[10] GPIO Interrupt (slave to host) GPIO[4] GPIO interrupt
GPIO[5] IOM0 SPI SCK GPIO[0] IOS SPI SCK
GPIO[7] IOM0 SPI MOSI GPIO[1] IOS SPI MOSI
GPIO[6] IOM0 SPI MISO GPIO[2] IOS SPI MISO
GPIO[11] IOM0 SPI nCE GPIO[3] IOS SPI nCE
GND GND
I2C:
HOST (ios_lram_host) SLAVE (ios_lram)
-------------------- ----------------
GPIO[10] GPIO Interrupt (slave to host) GPIO[4] GPIO interrupt
GPIO[5] IOM0 I2C SCL GPIO[0] IOS I2C SCL
GPIO[6] IOM0 I2C SDA GPIO[1] IOS I2C SDA
GND GND
******************************************************************************
