Name: ===== deepsleep_wake Description: ============ Example that goes to deepsleep and wakes from either the RTC or GPIO. This example configures the device to go into a deep sleep mode. Once in deep sleep the device has the ability to wake from button 0 or the RTC configured to interrupt every second. If the MCU woke from a button press, it will toggle LED0. If the MCU woke from the RTC, it will toggle LED1. The example begins by printing out a banner annoucement message through the UART, which is then completely disabled for the remainder of execution. Text is output to the UART at 115,200 BAUD, 8 bit, no parity. Please note that text end-of-line is a newline (LF) character only. Therefore, the UART terminal must be set to simulate a CR/LF. ******************************************************************************