1276 lines
38 KiB
C
1276 lines
38 KiB
C
//*****************************************************************************
|
|
//
|
|
// am_hal_adc.c
|
|
//! @file
|
|
//!
|
|
//! @brief Functions for interfacing with the Analog to Digital Converter.
|
|
//!
|
|
//! @addtogroup adc3 Analog-to-Digital Converter (ADC)
|
|
//! @ingroup apollo3hal
|
|
//! @{
|
|
//
|
|
//*****************************************************************************
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Copyright (c) 2020, Ambiq Micro
|
|
// All rights reserved.
|
|
//
|
|
// Redistribution and use in source and binary forms, with or without
|
|
// modification, are permitted provided that the following conditions are met:
|
|
//
|
|
// 1. Redistributions of source code must retain the above copyright notice,
|
|
// this list of conditions and the following disclaimer.
|
|
//
|
|
// 2. Redistributions in binary form must reproduce the above copyright
|
|
// notice, this list of conditions and the following disclaimer in the
|
|
// documentation and/or other materials provided with the distribution.
|
|
//
|
|
// 3. Neither the name of the copyright holder nor the names of its
|
|
// contributors may be used to endorse or promote products derived from this
|
|
// software without specific prior written permission.
|
|
//
|
|
// Third party software included in this distribution is subject to the
|
|
// additional license terms as defined in the /docs/licenses directory.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
|
|
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
// POSSIBILITY OF SUCH DAMAGE.
|
|
//
|
|
// This is part of revision 2.4.2 of the AmbiqSuite Development Package.
|
|
//
|
|
//*****************************************************************************
|
|
|
|
#include <stdint.h>
|
|
#include <stdbool.h>
|
|
#include "am_mcu_apollo.h"
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Private Types.
|
|
//
|
|
//*****************************************************************************
|
|
|
|
#define AM_HAL_MAGIC_ADC 0xAFAFAF
|
|
#define AM_HAL_ADC_CHK_HANDLE(h) ((h) && ((am_hal_handle_prefix_t *)(h))->s.bInit && (((am_hal_handle_prefix_t *)(h))->s.magic == AM_HAL_MAGIC_ADC))
|
|
|
|
// ****************************************************************************
|
|
//
|
|
// Apollo3 Temperature Trim Value Locations and default coefficients.
|
|
//
|
|
// ****************************************************************************
|
|
#define AM_HAL_ADC_CALIB_TEMP_ADDR (0x50023840)
|
|
#define AM_HAL_ADC_CALIB_AMBIENT_ADDR (0x50023844)
|
|
#define AM_HAL_ADC_CALIB_ADC_OFFSET_ADDR (0x50023848)
|
|
|
|
// ****************************************************************************
|
|
//
|
|
// Default coefficients (used when trims not provided):
|
|
// TEMP_DEFAULT = Temperature in deg K (e.g. 299.5 - 273.15 = 26.35)
|
|
// AMBIENT_DEFAULT = Voltage measurement at default temperature.
|
|
// OFFSET_DEFAULT = Default ADC offset at 1v.
|
|
//
|
|
// ****************************************************************************
|
|
#define AM_HAL_ADC_CALIB_TEMP_DEFAULT (299.5F)
|
|
#define AM_HAL_ADC_CALIB_AMBIENT_DEFAULT (1.02809F)
|
|
#define AM_HAL_ADC_CALIB_ADC_OFFSET_DEFAULT (-0.004281F)
|
|
|
|
|
|
//
|
|
// ADC Power save register state.
|
|
//
|
|
typedef struct
|
|
{
|
|
bool bValid;
|
|
uint32_t regCFG;
|
|
uint32_t regSL0CFG;
|
|
uint32_t regSL1CFG;
|
|
uint32_t regSL2CFG;
|
|
uint32_t regSL3CFG;
|
|
uint32_t regSL4CFG;
|
|
uint32_t regSL5CFG;
|
|
uint32_t regSL6CFG;
|
|
uint32_t regSL7CFG;
|
|
uint32_t regWULIM;
|
|
uint32_t regWLLIM;
|
|
uint32_t regINTEN;
|
|
} am_hal_adc_register_state_t;
|
|
|
|
//
|
|
// ADC State structure.
|
|
//
|
|
typedef struct
|
|
{
|
|
//
|
|
// Handle validation prefix.
|
|
//
|
|
am_hal_handle_prefix_t prefix;
|
|
|
|
//
|
|
// Physical module number.
|
|
//
|
|
uint32_t ui32Module;
|
|
|
|
//
|
|
// ADC Capabilities.
|
|
//
|
|
am_hal_adc_capabilities_t capabilities;
|
|
|
|
// Power Save-Restore register state
|
|
am_hal_adc_register_state_t registerState;
|
|
|
|
} am_hal_adc_state_t;
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Private SRAM view of temperature trims.
|
|
//!
|
|
//! This static SRAM union is private to the ADC HAL functions.
|
|
//
|
|
//*****************************************************************************
|
|
static union
|
|
{
|
|
//! These trim values are loaded as uint32_t values.
|
|
struct
|
|
{
|
|
//! Temperature of the package test head (in degrees Kelvin)
|
|
uint32_t ui32CalibrationTemperature;
|
|
|
|
//! Voltage corresponding to temperature measured on test head.
|
|
uint32_t ui32CalibrationVoltage;
|
|
|
|
//! ADC offset voltage measured on the package test head.
|
|
uint32_t ui32CalibrationOffset;
|
|
|
|
//! Flag if default (guess) or measured.
|
|
bool bMeasured;
|
|
} ui32;
|
|
//! These trim values are accessed as floats when used in temp calculations.
|
|
struct
|
|
{
|
|
//! Temperature of the package test head in degrees Kelvin
|
|
float fCalibrationTemperature;
|
|
|
|
//! Voltage corresponding to temperature measured on test head.
|
|
float fCalibrationVoltage;
|
|
|
|
//! ADC offset voltage measured on the package test head.
|
|
float fCalibrationOffset;
|
|
|
|
//! Flag if default (guess) or measured.
|
|
float fMeasuredFlag;
|
|
} flt;
|
|
} priv_temp_trims;
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Global Variables.
|
|
//
|
|
//*****************************************************************************
|
|
am_hal_adc_state_t g_ADCState[AM_REG_ADC_NUM_MODULES];
|
|
|
|
uint32_t g_ADCSlotsConfigured;
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief ADC initialization function
|
|
//!
|
|
//! @param ui32Module - module instance.
|
|
//! @param handle - returns the handle for the module instance.
|
|
//!
|
|
//! This function accepts a module instance, allocates the interface and then
|
|
//! returns a handle to be used by the remaining interface functions.
|
|
//!
|
|
//! @return status - generic or interface specific status.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
am_hal_adc_initialize(uint32_t ui32Module, void **ppHandle)
|
|
{
|
|
|
|
#ifndef AM_HAL_DISABLE_API_VALIDATION
|
|
//
|
|
// Validate the module number
|
|
//
|
|
if ( ui32Module >= AM_REG_ADC_NUM_MODULES )
|
|
{
|
|
return AM_HAL_STATUS_OUT_OF_RANGE;
|
|
}
|
|
|
|
//
|
|
// Check for valid arguements.
|
|
//
|
|
if ( !ppHandle )
|
|
{
|
|
return AM_HAL_STATUS_INVALID_ARG;
|
|
}
|
|
|
|
//
|
|
// Check if the handle is unallocated.
|
|
//
|
|
if ( g_ADCState[ui32Module].prefix.s.bInit )
|
|
{
|
|
return AM_HAL_STATUS_INVALID_OPERATION;
|
|
}
|
|
#endif // AM_HAL_DISABLE_API_VALIDATION
|
|
|
|
//
|
|
// Initialize the handle.
|
|
//
|
|
g_ADCState[ui32Module].prefix.s.bInit = true;
|
|
g_ADCState[ui32Module].prefix.s.magic = AM_HAL_MAGIC_ADC;
|
|
g_ADCState[ui32Module].ui32Module = ui32Module;
|
|
|
|
//
|
|
// Initialize the number of slots configured.
|
|
//
|
|
g_ADCSlotsConfigured = 0;
|
|
|
|
//
|
|
// Return the handle.
|
|
//
|
|
*ppHandle = (void *)&g_ADCState[ui32Module];
|
|
|
|
//
|
|
// Before returning, grab the temperature trims.
|
|
//
|
|
priv_temp_trims.ui32.ui32CalibrationTemperature =
|
|
am_hal_flash_load_ui32((uint32_t*)AM_HAL_ADC_CALIB_TEMP_ADDR);
|
|
priv_temp_trims.ui32.ui32CalibrationVoltage =
|
|
am_hal_flash_load_ui32((uint32_t*)AM_HAL_ADC_CALIB_AMBIENT_ADDR);
|
|
priv_temp_trims.ui32.ui32CalibrationOffset =
|
|
am_hal_flash_load_ui32((uint32_t*)AM_HAL_ADC_CALIB_ADC_OFFSET_ADDR);
|
|
|
|
if ( (priv_temp_trims.ui32.ui32CalibrationTemperature == 0xffffffff) ||
|
|
(priv_temp_trims.ui32.ui32CalibrationVoltage == 0xffffffff) ||
|
|
(priv_temp_trims.ui32.ui32CalibrationOffset == 0xffffffff) )
|
|
{
|
|
//
|
|
// Since the device has not been calibrated on the tester, we'll load
|
|
// default calibration values. These default values should result
|
|
// in worst-case temperature measurements of +-6 degress C.
|
|
//
|
|
priv_temp_trims.flt.fCalibrationTemperature = AM_HAL_ADC_CALIB_TEMP_DEFAULT;
|
|
priv_temp_trims.flt.fCalibrationVoltage = AM_HAL_ADC_CALIB_AMBIENT_DEFAULT;
|
|
priv_temp_trims.flt.fCalibrationOffset = AM_HAL_ADC_CALIB_ADC_OFFSET_DEFAULT;
|
|
priv_temp_trims.ui32.bMeasured = false;
|
|
}
|
|
else
|
|
{
|
|
priv_temp_trims.ui32.bMeasured = true;
|
|
}
|
|
|
|
//
|
|
// Return the status.
|
|
//
|
|
return AM_HAL_STATUS_SUCCESS;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief MSPI deinitialization function
|
|
//!
|
|
//! @param handle - returns the handle for the module instance.
|
|
//!
|
|
//! This function accepts a handle to an instance and de-initializes the
|
|
//! interface.
|
|
//!
|
|
//! @return status - generic or interface specific status.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
am_hal_adc_deinitialize(void *pHandle)
|
|
{
|
|
uint32_t status = AM_HAL_STATUS_SUCCESS;
|
|
am_hal_adc_state_t *pADCState = (am_hal_adc_state_t *)pHandle;
|
|
|
|
#ifndef AM_HAL_DISABLE_API_VALIDATION
|
|
//
|
|
// Check the handle.
|
|
//
|
|
if ( !AM_HAL_ADC_CHK_HANDLE(pHandle) )
|
|
{
|
|
return AM_HAL_STATUS_INVALID_HANDLE;
|
|
}
|
|
#endif // AM_HAL_DISABLE_API_VALIDATION
|
|
|
|
if ( pADCState->prefix.s.bEnable )
|
|
{
|
|
status = am_hal_adc_disable(pHandle);
|
|
}
|
|
|
|
pADCState->prefix.s.bInit = false;
|
|
|
|
//
|
|
// Return the status.
|
|
//
|
|
return status;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief ADC configuration function
|
|
//!
|
|
//! @param handle - handle for the module instance.
|
|
//! @param pConfig - pointer to the configuration structure.
|
|
//!
|
|
//! This function configures the ADC for operation.
|
|
//!
|
|
//! @return status - generic or interface specific status.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
am_hal_adc_configure(void *pHandle,
|
|
am_hal_adc_config_t *psConfig)
|
|
{
|
|
uint32_t ui32Config;
|
|
am_hal_adc_state_t *pADCState = (am_hal_adc_state_t *)pHandle;
|
|
uint32_t ui32Module = pADCState->ui32Module;
|
|
|
|
#ifndef AM_HAL_DISABLE_API_VALIDATION
|
|
//
|
|
// Check the handle.
|
|
//
|
|
if ( !AM_HAL_ADC_CHK_HANDLE(pHandle) )
|
|
{
|
|
return AM_HAL_STATUS_INVALID_HANDLE;
|
|
}
|
|
#endif // AM_HAL_DISABLE_API_VALIDATION
|
|
|
|
ui32Config = 0;
|
|
|
|
//
|
|
// Set the ADC clock source.
|
|
//
|
|
ui32Config |= _VAL2FLD(ADC_CFG_CLKSEL, psConfig->eClock);
|
|
|
|
//
|
|
// Set the ADC trigger polarity.
|
|
//
|
|
ui32Config |= _VAL2FLD(ADC_CFG_TRIGPOL, psConfig->ePolarity);
|
|
|
|
//
|
|
// Set the ADC trigger.
|
|
//
|
|
ui32Config |= _VAL2FLD(ADC_CFG_TRIGSEL, psConfig->eTrigger);
|
|
|
|
//
|
|
// Set the ADC reference voltage.
|
|
//
|
|
ui32Config |= _VAL2FLD(ADC_CFG_REFSEL, psConfig->eReference);
|
|
|
|
//
|
|
// Set the Destructive FIFO read.
|
|
//
|
|
ui32Config |= _VAL2FLD(ADC_CFG_DFIFORDEN, 1);
|
|
|
|
//
|
|
// Set the ADC clock mode.
|
|
//
|
|
ui32Config |= _VAL2FLD(ADC_CFG_CKMODE, psConfig->eClockMode);
|
|
|
|
//
|
|
// Set the ADC low power mode.
|
|
//
|
|
ui32Config |= _VAL2FLD(ADC_CFG_LPMODE, psConfig->ePowerMode);
|
|
|
|
//
|
|
// Set the ADC repetition mode.
|
|
//
|
|
ui32Config |= _VAL2FLD(ADC_CFG_RPTEN, psConfig->eRepeat);
|
|
|
|
//
|
|
// Set the configuration in the ADC peripheral.
|
|
//
|
|
ADCn(ui32Module)->CFG = ui32Config;
|
|
|
|
//
|
|
// Return status.
|
|
//
|
|
return AM_HAL_STATUS_SUCCESS;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief ADC slot configuration function
|
|
//!
|
|
//! @param handle - handle for the module instance.
|
|
//! @param pConfig - pointer to the configuration structure.
|
|
//!
|
|
//! This function configures the ADC slot for operation.
|
|
//!
|
|
//! @return status - generic or interface specific status.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
am_hal_adc_configure_slot(void *pHandle,
|
|
uint32_t ui32SlotNumber,
|
|
am_hal_adc_slot_config_t *pSlotConfig)
|
|
{
|
|
uint32_t ui32Config;
|
|
uint32_t ui32RegOffset;
|
|
am_hal_adc_state_t *pADCState = (am_hal_adc_state_t *)pHandle;
|
|
uint32_t ui32Module = pADCState->ui32Module;
|
|
|
|
#ifndef AM_HAL_DISABLE_API_VALIDATION
|
|
//
|
|
// Check the handle.
|
|
//
|
|
if ( !AM_HAL_ADC_CHK_HANDLE(pHandle) )
|
|
{
|
|
return AM_HAL_STATUS_INVALID_HANDLE;
|
|
}
|
|
|
|
//
|
|
// Check the slot number.
|
|
//
|
|
if ( ui32SlotNumber >= AM_HAL_ADC_MAX_SLOTS )
|
|
{
|
|
return AM_HAL_STATUS_OUT_OF_RANGE;
|
|
}
|
|
#endif // AM_HAL_DISABLE_API_VALIDATION
|
|
|
|
ui32Config = 0;
|
|
|
|
//
|
|
// Set the measurements to average
|
|
//
|
|
ui32Config |= _VAL2FLD(ADC_SL0CFG_ADSEL0, pSlotConfig->eMeasToAvg);
|
|
|
|
//
|
|
// Set the precision mode.
|
|
//
|
|
ui32Config |= _VAL2FLD(ADC_SL0CFG_PRMODE0, pSlotConfig->ePrecisionMode);
|
|
|
|
//
|
|
// Set the channel.
|
|
//
|
|
ui32Config |= _VAL2FLD(ADC_SL0CFG_CHSEL0, pSlotConfig->eChannel);
|
|
|
|
//
|
|
// Enable window comparison if configured.
|
|
//
|
|
ui32Config |= _VAL2FLD(ADC_SL0CFG_WCEN0, pSlotConfig->bWindowCompare);
|
|
|
|
//
|
|
// Enable the slot if configured.
|
|
//
|
|
ui32Config |= _VAL2FLD(ADC_SL0CFG_SLEN0, pSlotConfig->bEnabled);
|
|
|
|
//
|
|
// Locate the correct register for this ADC slot.
|
|
//
|
|
ui32RegOffset = ((uint32_t)&ADCn(ui32Module)->SL0CFG) + (4 * ui32SlotNumber);
|
|
|
|
//
|
|
// Write the register with the caller's configuration value.
|
|
//
|
|
AM_REGVAL(ui32RegOffset) = ui32Config;
|
|
|
|
//
|
|
// Update the nubmer of slots configured.
|
|
//
|
|
g_ADCSlotsConfigured++;
|
|
|
|
//
|
|
// Return the status.
|
|
//
|
|
return AM_HAL_STATUS_SUCCESS;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief ADC DMA configuration function
|
|
//!
|
|
//! @param handle - handle for the module instance.
|
|
//! @param pConfig - pointer to the configuration structure.
|
|
//!
|
|
//! This function configures the ADC DMA for operation.
|
|
//!
|
|
//! @return status - generic or interface specific status.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
am_hal_adc_configure_dma(void *pHandle,
|
|
am_hal_adc_dma_config_t *pDMAConfig)
|
|
{
|
|
uint32_t ui32Config;
|
|
uint32_t ui32Module = ((am_hal_adc_state_t *)pHandle)->ui32Module;
|
|
|
|
#ifndef AM_HAL_DISABLE_API_VALIDATION
|
|
//
|
|
// Check the handle.
|
|
//
|
|
if ( !AM_HAL_ADC_CHK_HANDLE(pHandle) )
|
|
{
|
|
return AM_HAL_STATUS_INVALID_HANDLE;
|
|
}
|
|
#endif // AM_HAL_DISABLE_API_VALIDATION
|
|
|
|
ui32Config = 0;
|
|
|
|
//
|
|
// Configure the DMA complete power-off.
|
|
//
|
|
ui32Config |= _VAL2FLD(ADC_DMACFG_DPWROFF, 0); // DPWROFF not supported!
|
|
|
|
//
|
|
// Configure the data to be transferred.
|
|
//
|
|
if ( g_ADCSlotsConfigured > 1 )
|
|
{
|
|
// Need slot number to distinguish between slot results.
|
|
ui32Config |= _VAL2FLD(ADC_DMACFG_DMAMSK, ADC_DMACFG_DMAMSK_DIS);
|
|
}
|
|
else
|
|
{
|
|
ui32Config |= _VAL2FLD(ADC_DMACFG_DMAMSK, ADC_DMACFG_DMAMSK_EN);
|
|
}
|
|
|
|
//
|
|
// Enable DMA Halt on Status (DMAERR or DMACPL) by default.
|
|
//
|
|
ui32Config |= _VAL2FLD(ADC_DMACFG_DMAHONSTAT, ADC_DMACFG_DMAHONSTAT_EN);
|
|
|
|
//
|
|
// Configure the DMA dynamic priority handling.
|
|
//
|
|
ui32Config |= _VAL2FLD(ADC_DMACFG_DMADYNPRI, pDMAConfig->bDynamicPriority);
|
|
|
|
//
|
|
// Configure the DMA static priority.
|
|
//
|
|
ui32Config |= _VAL2FLD(ADC_DMACFG_DMAPRI, pDMAConfig->ePriority);
|
|
|
|
//
|
|
// Enable the DMA (does not start until ADC is enabled and triggered).
|
|
//
|
|
ui32Config |= _VAL2FLD(ADC_DMACFG_DMAEN, ADC_DMACFG_DMAEN_EN);
|
|
|
|
//
|
|
// Set the DMA configuration.
|
|
//
|
|
ADCn(ui32Module)->DMACFG = ui32Config;
|
|
|
|
//
|
|
// Set the DMA transfer count.
|
|
//
|
|
ADCn(ui32Module)->DMATOTCOUNT_b.TOTCOUNT = pDMAConfig->ui32SampleCount;
|
|
|
|
//
|
|
// Set the DMA target address.
|
|
//
|
|
ADCn(ui32Module)->DMATARGADDR = pDMAConfig->ui32TargetAddress;
|
|
|
|
//
|
|
// Set the DMA trigger on FIFO 75% full.
|
|
//
|
|
ADCn(ui32Module)->DMATRIGEN = ADC_DMATRIGEN_DFIFO75_Msk;
|
|
|
|
//
|
|
// Return the status.
|
|
//
|
|
return AM_HAL_STATUS_SUCCESS;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief ADC device specific control function.
|
|
//!
|
|
//! @param handle - handle for the module instance.
|
|
//!
|
|
//! This function provides for special control functions for the ADC operation.
|
|
//!
|
|
//! @return status - generic or interface specific status.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t am_hal_adc_control(void *pHandle,
|
|
am_hal_adc_request_e eRequest,
|
|
void *pArgs)
|
|
{
|
|
uint32_t ui32Module = ((am_hal_adc_state_t *)pHandle)->ui32Module;
|
|
|
|
#ifndef AM_HAL_DISABLE_API_VALIDATION
|
|
//
|
|
// Check the handle.
|
|
//
|
|
if ( !AM_HAL_ADC_CHK_HANDLE(pHandle) )
|
|
{
|
|
return AM_HAL_STATUS_INVALID_HANDLE;
|
|
}
|
|
#endif // AM_HAL_DISABLE_API_VALIDATION
|
|
|
|
switch ( eRequest )
|
|
{
|
|
case AM_HAL_ADC_REQ_WINDOW_CONFIG:
|
|
{
|
|
am_hal_adc_window_config_t *pWindowConfig = (am_hal_adc_window_config_t *)pArgs;
|
|
|
|
#ifndef AM_HAL_DISABLE_API_VALIDATION
|
|
//
|
|
// Check the window limits.
|
|
//
|
|
if ( (pWindowConfig->ui32Upper > ADC_WULIM_ULIM_Msk) ||
|
|
(pWindowConfig->ui32Lower > ADC_WLLIM_LLIM_Msk) )
|
|
{
|
|
return AM_HAL_STATUS_OUT_OF_RANGE;
|
|
}
|
|
#endif // AM_HAL_DISABLE_API_VALIDATION
|
|
//
|
|
// Set the window comparison upper and lower limits.
|
|
//
|
|
ADCn(ui32Module)->WULIM = _VAL2FLD(ADC_WULIM_ULIM, pWindowConfig->ui32Upper);
|
|
ADCn(ui32Module)->WLLIM = _VAL2FLD(ADC_WLLIM_LLIM, pWindowConfig->ui32Lower);
|
|
|
|
//
|
|
// Set the window scale per precision mode if indicated.
|
|
//
|
|
ADCn(ui32Module)->SCWLIM = _VAL2FLD(ADC_SCWLIM_SCWLIMEN,
|
|
pWindowConfig->bScaleLimits);
|
|
}
|
|
break;
|
|
|
|
case AM_HAL_ADC_REQ_TEMP_CELSIUS_GET:
|
|
//
|
|
// pArgs must point to an array of 3 floats. To assure that the
|
|
// array is valid, upon calling the 3rd float (pArgs[2]) must be
|
|
// set to the value -123.456F.
|
|
//
|
|
if ( pArgs != NULL )
|
|
{
|
|
float *pfArray = (float*)pArgs;
|
|
float fTemp, fCalibration_temp, fCalibration_voltage, fCalibration_offset, fVoltage;
|
|
|
|
if ( pfArray[2] == -123.456F )
|
|
{
|
|
//
|
|
// Get the scaled voltage obtained from the ADC sample.
|
|
// The ADC sample value is scaled up by the reference voltage
|
|
// (e.g. 1.5F), then divided by 65536.0F.
|
|
//
|
|
fVoltage = pfArray[0];
|
|
|
|
//
|
|
// Get calibration temperature from trimmed values & convert to degrees K.
|
|
//
|
|
fCalibration_temp = priv_temp_trims.flt.fCalibrationTemperature;
|
|
fCalibration_voltage = priv_temp_trims.flt.fCalibrationVoltage;
|
|
fCalibration_offset = priv_temp_trims.flt.fCalibrationOffset;
|
|
|
|
//
|
|
// Compute the temperature.
|
|
//
|
|
fTemp = fCalibration_temp;
|
|
fTemp /= (fCalibration_voltage - fCalibration_offset);
|
|
fTemp *= (fVoltage - fCalibration_offset);
|
|
|
|
//
|
|
// Give it back to the caller in Celsius.
|
|
//
|
|
pfArray[1] = fTemp - 273.15f;
|
|
}
|
|
else
|
|
{
|
|
return AM_HAL_STATUS_INVALID_OPERATION;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
return AM_HAL_STATUS_INVALID_ARG;
|
|
}
|
|
break;
|
|
|
|
case AM_HAL_ADC_REQ_TEMP_TRIMS_GET:
|
|
//
|
|
// pArgs must point to an array of 4 floats. To assure that the
|
|
// array is valid, upon calling the 4th float (pArgs[3]) must be
|
|
// set to the value -123.456.
|
|
// On return, pArgs[3] is set to 1 if the returned values are
|
|
// calibrated, or 0 if default calibration values.
|
|
//
|
|
if ( pArgs != NULL )
|
|
{
|
|
float *pfArray = (float*)pArgs;
|
|
if ( pfArray[3] == -123.456F )
|
|
{
|
|
//
|
|
// Return trim temperature as a float.
|
|
//
|
|
pfArray[0] = priv_temp_trims.flt.fCalibrationTemperature;
|
|
|
|
//
|
|
// Return trim voltage as a float.
|
|
//
|
|
pfArray[1] = priv_temp_trims.flt.fCalibrationVoltage;
|
|
|
|
//
|
|
// Return trim ADC offset voltage as a float.
|
|
//
|
|
pfArray[2] = priv_temp_trims.flt.fCalibrationOffset;
|
|
|
|
//
|
|
// Set the calibrated or uncalibrated flag
|
|
//
|
|
((uint32_t*)pArgs)[3] = priv_temp_trims.ui32.bMeasured;
|
|
}
|
|
else
|
|
{
|
|
return AM_HAL_STATUS_INVALID_OPERATION;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
return AM_HAL_STATUS_INVALID_ARG;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
return AM_HAL_STATUS_INVALID_ARG;
|
|
}
|
|
|
|
//
|
|
// Return status.
|
|
//
|
|
return AM_HAL_STATUS_SUCCESS;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief ADC enable function
|
|
//!
|
|
//! @param handle - handle for the module instance.
|
|
//!
|
|
//! This function enables the ADC operation.
|
|
//!
|
|
//! @return status - generic or interface specific status.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
am_hal_adc_enable(void *pHandle)
|
|
{
|
|
am_hal_adc_state_t *pADCState = (am_hal_adc_state_t *)pHandle;
|
|
uint32_t ui32Module = pADCState->ui32Module;
|
|
|
|
#ifndef AM_HAL_DISABLE_API_VALIDATION
|
|
//
|
|
// Check the handle.
|
|
//
|
|
if ( !AM_HAL_ADC_CHK_HANDLE(pHandle) )
|
|
{
|
|
return AM_HAL_STATUS_INVALID_HANDLE;
|
|
}
|
|
|
|
if ( pADCState->prefix.s.bEnable )
|
|
{
|
|
return AM_HAL_STATUS_SUCCESS;
|
|
}
|
|
#endif // AM_HAL_DISABLE_API_VALIDATION
|
|
|
|
//
|
|
// Enable the ADC.
|
|
//
|
|
ADCn(ui32Module)->CFG_b.ADCEN = 0x1;
|
|
|
|
//
|
|
// Set flag to indicate module is enabled.
|
|
//
|
|
pADCState->prefix.s.bEnable = true;
|
|
|
|
//
|
|
// Return the status.
|
|
//
|
|
return AM_HAL_STATUS_SUCCESS;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief ADC disable function
|
|
//!
|
|
//! @param handle - handle for the module instance.
|
|
//!
|
|
//! This function disables the ADC operation.
|
|
//!
|
|
//! @return status - generic or interface specific status.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
am_hal_adc_disable(void *pHandle)
|
|
{
|
|
am_hal_adc_state_t *pADCState = (am_hal_adc_state_t *)pHandle;
|
|
uint32_t ui32Module = pADCState->ui32Module;
|
|
|
|
#ifndef AM_HAL_DISABLE_API_VALIDATION
|
|
//
|
|
// Check the handle.
|
|
//
|
|
if ( !AM_HAL_ADC_CHK_HANDLE(pHandle) )
|
|
{
|
|
return AM_HAL_STATUS_INVALID_HANDLE;
|
|
}
|
|
#endif // AM_HAL_DISABLE_API_VALIDATION
|
|
|
|
//
|
|
// Disable the ADC.
|
|
//
|
|
ADCn(ui32Module)->CFG_b.ADCEN = 0x0;
|
|
|
|
//
|
|
// Set flag to indicate module is disabled.
|
|
//
|
|
pADCState->prefix.s.bEnable = false;
|
|
|
|
//
|
|
// Return the status.
|
|
//
|
|
return AM_HAL_STATUS_SUCCESS;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief ADC status function
|
|
//!
|
|
//! @param handle - handle for the interface.
|
|
//!
|
|
//! This function returns the current status of the DMA operation.
|
|
//!
|
|
//! @return status - DMA status flags.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
am_hal_adc_status_get(void *pHandle, am_hal_adc_status_t *pStatus )
|
|
{
|
|
uint32_t ui32Module = ((am_hal_adc_state_t *)pHandle)->ui32Module;
|
|
|
|
#ifndef AM_HAL_DISABLE_API_VALIDATION
|
|
//
|
|
// Check the handle.
|
|
//
|
|
if ( !AM_HAL_ADC_CHK_HANDLE(pHandle) )
|
|
{
|
|
return AM_HAL_STATUS_INVALID_HANDLE;
|
|
}
|
|
#endif // AM_HAL_DISABLE_API_VALIDATION
|
|
|
|
//
|
|
// Get the power status.
|
|
//
|
|
pStatus->bPoweredOn = (ADCn(ui32Module)->STAT & ADC_STAT_PWDSTAT_Msk) ==
|
|
_VAL2FLD(ADC_STAT_PWDSTAT, ADC_STAT_PWDSTAT_ON);
|
|
|
|
//
|
|
// Get the low power mode 1 status.
|
|
//
|
|
pStatus->bLPMode1 = (ADCn(ui32Module)->STAT & ADC_STAT_PWDSTAT_Msk) ==
|
|
_VAL2FLD(ADC_STAT_PWDSTAT, ADC_STAT_PWDSTAT_POWERED_DOWN);
|
|
|
|
//
|
|
// Get the DMA status.
|
|
//
|
|
pStatus->bErr = ((ADCn(ui32Module)->DMASTAT & ADC_DMASTAT_DMAERR_Msk) > 0);
|
|
pStatus->bCmp = ((ADCn(ui32Module)->DMASTAT & ADC_DMASTAT_DMACPL_Msk) > 0);
|
|
pStatus->bTIP = ((ADCn(ui32Module)->DMASTAT & ADC_DMASTAT_DMATIP_Msk) > 0);
|
|
|
|
//
|
|
// Return the status.
|
|
//
|
|
return AM_HAL_STATUS_SUCCESS;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief ADC enable interrupts function
|
|
//!
|
|
//! @param handle - handle for the interface.
|
|
//! @param ui32IntMask - ADC interrupt mask.
|
|
//!
|
|
//! This function enables the specific indicated interrupts.
|
|
//!
|
|
//! @return status - generic or interface specific status.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
am_hal_adc_interrupt_enable(void *pHandle, uint32_t ui32IntMask)
|
|
{
|
|
uint32_t ui32Module = ((am_hal_adc_state_t*)pHandle)->ui32Module;
|
|
|
|
#ifndef AM_HAL_DISABLE_API_VALIDATION
|
|
//
|
|
// Check the handle.
|
|
//
|
|
if ( !AM_HAL_ADC_CHK_HANDLE(pHandle) )
|
|
{
|
|
return AM_HAL_STATUS_INVALID_HANDLE;
|
|
}
|
|
#endif // AM_HAL_DISABLE_API_VALIDATION
|
|
|
|
//
|
|
// Enable the interrupts.
|
|
//
|
|
ADCn(ui32Module)->INTEN |= ui32IntMask;
|
|
|
|
//
|
|
// Return the status.
|
|
//
|
|
return AM_HAL_STATUS_SUCCESS;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief ADC disable interrupts function
|
|
//!
|
|
//! @param handle - handle for the interface.
|
|
//! @param ui32IntMask - ADC interrupt mask.
|
|
//!
|
|
//! This function disable the specific indicated interrupts.
|
|
//!
|
|
//! @return status - generic or interface specific status.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
am_hal_adc_interrupt_disable(void *pHandle, uint32_t ui32IntMask)
|
|
{
|
|
uint32_t ui32Module = ((am_hal_adc_state_t*)pHandle)->ui32Module;
|
|
|
|
#ifndef AM_HAL_DISABLE_API_VALIDATION
|
|
//
|
|
// Check the handle.
|
|
//
|
|
if ( !AM_HAL_ADC_CHK_HANDLE(pHandle) )
|
|
{
|
|
return AM_HAL_STATUS_INVALID_HANDLE;
|
|
}
|
|
#endif // AM_HAL_DISABLE_API_VALIDATION
|
|
|
|
//
|
|
// Disable the interrupts.
|
|
//
|
|
ADCn(ui32Module)->INTEN &= ~ui32IntMask;
|
|
|
|
//
|
|
// Return the status.
|
|
//
|
|
return AM_HAL_STATUS_SUCCESS;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief ADC interrupt status function
|
|
//!
|
|
//! @param handle - handle for the interface.
|
|
//!
|
|
//! This function returns the specific indicated interrupt status.
|
|
//!
|
|
//! @return status - generic or interface specific status.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
am_hal_adc_interrupt_status(void *pHandle,
|
|
uint32_t *pui32Status,
|
|
bool bEnabledOnly)
|
|
{
|
|
uint32_t ui32Module = ((am_hal_adc_state_t*)pHandle)->ui32Module;
|
|
|
|
#ifndef AM_HAL_DISABLE_API_VALIDATION
|
|
//
|
|
// Check the handle.
|
|
//
|
|
if ( !AM_HAL_ADC_CHK_HANDLE(pHandle) )
|
|
{
|
|
return AM_HAL_STATUS_INVALID_HANDLE;
|
|
}
|
|
#endif // AM_HAL_DISABLE_API_VALIDATION
|
|
|
|
//
|
|
// if requested, only return the interrupts that are enabled.
|
|
//
|
|
if ( bEnabledOnly )
|
|
{
|
|
uint32_t ui32RetVal = ADCn(ui32Module)->INTSTAT;
|
|
*pui32Status = ADCn(ui32Module)->INTEN & ui32RetVal;
|
|
}
|
|
else
|
|
{
|
|
*pui32Status = ADCn(ui32Module)->INTSTAT;
|
|
}
|
|
|
|
//
|
|
// Return the status.
|
|
//
|
|
return AM_HAL_STATUS_SUCCESS;
|
|
}
|
|
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief ADC interrupt clear
|
|
//!
|
|
//! @param handle - handle for the interface.
|
|
//! @param ui32IntMask - uint32_t for interrupts to clear
|
|
//!
|
|
//! This function clears the interrupts for the given peripheral.
|
|
//!
|
|
//! @return status - generic or interface specific status.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
am_hal_adc_interrupt_clear(void *pHandle, uint32_t ui32IntMask)
|
|
{
|
|
uint32_t ui32Module = ((am_hal_adc_state_t*)pHandle)->ui32Module;
|
|
|
|
#ifndef AM_HAL_DISABLE_API_VALIDATION
|
|
//
|
|
// Check the handle.
|
|
//
|
|
if ( !AM_HAL_ADC_CHK_HANDLE(pHandle) )
|
|
{
|
|
return AM_HAL_STATUS_INVALID_HANDLE;
|
|
}
|
|
#endif // AM_HAL_DISABLE_API_VALIDATION
|
|
|
|
//
|
|
// Clear the interrupts.
|
|
//
|
|
ADCn(ui32Module)->INTCLR = ui32IntMask;
|
|
|
|
//
|
|
// Return the status.
|
|
//
|
|
return AM_HAL_STATUS_SUCCESS;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// ADC sample read function
|
|
//
|
|
// This function reads samples from the ADC FIFO or an SRAM sample buffer
|
|
// returned by a DMA operation.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t am_hal_adc_samples_read(void *pHandle, bool bFullSample,
|
|
uint32_t *pui32InSampleBuffer,
|
|
uint32_t *pui32InOutNumberSamples,
|
|
am_hal_adc_sample_t *pui32OutBuffer)
|
|
{
|
|
uint32_t ui32Sample;
|
|
uint32_t ui32RequestedSamples = *pui32InOutNumberSamples;
|
|
|
|
uint32_t ui32Module = ((am_hal_adc_state_t*)pHandle)->ui32Module;
|
|
|
|
#ifndef AM_HAL_DISABLE_API_VALIDATION
|
|
//
|
|
// Check the handle.
|
|
//
|
|
if ( !AM_HAL_ADC_CHK_HANDLE(pHandle) )
|
|
{
|
|
return AM_HAL_STATUS_INVALID_HANDLE;
|
|
}
|
|
|
|
//
|
|
// Check the output sample buffer pointer.
|
|
//
|
|
if ( NULL == pui32OutBuffer )
|
|
{
|
|
return AM_HAL_STATUS_INVALID_ARG;
|
|
}
|
|
#endif // AM_HAL_DISABLE_API_VALIDATION
|
|
|
|
|
|
*pui32InOutNumberSamples = 0;
|
|
|
|
//
|
|
// Check if we are reading directly from FIFO or DMA SRAM buffer.
|
|
//
|
|
if ( NULL == pui32InSampleBuffer )
|
|
{
|
|
//
|
|
// Grab a value from the ADC FIFO
|
|
//
|
|
do
|
|
{
|
|
ui32Sample = ADCn(ui32Module)->FIFOPR;
|
|
pui32OutBuffer->ui32Slot = AM_HAL_ADC_FIFO_SLOT(ui32Sample);
|
|
pui32OutBuffer->ui32Sample = bFullSample ?
|
|
AM_HAL_ADC_FIFO_FULL_SAMPLE(ui32Sample) :
|
|
AM_HAL_ADC_FIFO_SAMPLE(ui32Sample);
|
|
pui32OutBuffer++;
|
|
(*pui32InOutNumberSamples)++;
|
|
} while ((AM_HAL_ADC_FIFO_COUNT(ui32Sample) > 0) &&
|
|
(*pui32InOutNumberSamples < ui32RequestedSamples));
|
|
}
|
|
else
|
|
{
|
|
//
|
|
// Process the samples from the provided sample buffer
|
|
//
|
|
do
|
|
{
|
|
ui32Sample = ADCn(ui32Module)->FIFOPR;
|
|
pui32OutBuffer->ui32Slot = AM_HAL_ADC_FIFO_SLOT(*pui32InSampleBuffer);
|
|
pui32OutBuffer->ui32Sample = AM_HAL_ADC_FIFO_SAMPLE(*pui32InSampleBuffer);
|
|
pui32InSampleBuffer++;
|
|
pui32OutBuffer++;
|
|
(*pui32InOutNumberSamples)++;
|
|
} while (*pui32InOutNumberSamples < ui32RequestedSamples);
|
|
}
|
|
|
|
//
|
|
// Return FIFO valid bits.
|
|
//
|
|
return AM_HAL_STATUS_SUCCESS;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Issue Software Trigger to the ADC.
|
|
//!
|
|
//! @param handle - handle for the module instance.
|
|
//!
|
|
//! This function triggers the ADC operation.
|
|
//!
|
|
//! @return status - generic or interface specific status.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
am_hal_adc_sw_trigger(void *pHandle)
|
|
{
|
|
uint32_t ui32Module = ((am_hal_adc_state_t*)pHandle)->ui32Module;
|
|
|
|
#ifndef AM_HAL_DISABLE_API_VALIDATION
|
|
//
|
|
// Check the handle.
|
|
//
|
|
if ( !AM_HAL_ADC_CHK_HANDLE(pHandle) )
|
|
{
|
|
return AM_HAL_STATUS_INVALID_HANDLE;
|
|
}
|
|
#endif // AM_HAL_DISABLE_API_VALIDATION
|
|
|
|
//
|
|
// Write to the Software trigger register in the ADC.
|
|
//
|
|
ADCn(ui32Module)->SWT = 0x37;
|
|
|
|
//
|
|
// Return the status.
|
|
//
|
|
return AM_HAL_STATUS_SUCCESS;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief ADC power control function
|
|
//!
|
|
//! @param handle - handle for the interface.
|
|
//! @param ePowerState - the desired power state to move the peripheral to.
|
|
//! @param bRetainState - flag (if true) to save/restore peripheral state upon
|
|
//! power state change.
|
|
//!
|
|
//! This function updates the peripheral to a given power state.
|
|
//!
|
|
//! @return status - generic or interface specific status.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
am_hal_adc_power_control(void *pHandle,
|
|
am_hal_sysctrl_power_state_e ePowerState,
|
|
bool bRetainState)
|
|
{
|
|
am_hal_adc_state_t *pADCState = (am_hal_adc_state_t *)pHandle;
|
|
uint32_t ui32Module = pADCState->ui32Module;
|
|
|
|
#ifndef AM_HAL_DISABLE_API_VALIDATION
|
|
//
|
|
// Check the handle.
|
|
//
|
|
if ( !AM_HAL_ADC_CHK_HANDLE(pHandle) )
|
|
{
|
|
return AM_HAL_STATUS_INVALID_HANDLE;
|
|
}
|
|
#endif // AM_HAL_DISABLE_API_VALIDATION
|
|
|
|
//
|
|
// Decode the requested power state and update MSPI operation accordingly.
|
|
//
|
|
switch (ePowerState)
|
|
{
|
|
case AM_HAL_SYSCTRL_WAKE:
|
|
if ( bRetainState && !pADCState->registerState.bValid )
|
|
{
|
|
return AM_HAL_STATUS_INVALID_OPERATION;
|
|
}
|
|
|
|
//
|
|
// Enable the ADC power domain.
|
|
//
|
|
am_hal_pwrctrl_periph_enable(AM_HAL_PWRCTRL_PERIPH_ADC);
|
|
|
|
if ( bRetainState )
|
|
{
|
|
ADCn(ui32Module)->SL0CFG = pADCState->registerState.regSL0CFG;
|
|
ADCn(ui32Module)->SL1CFG = pADCState->registerState.regSL1CFG;
|
|
ADCn(ui32Module)->SL2CFG = pADCState->registerState.regSL2CFG;
|
|
ADCn(ui32Module)->SL3CFG = pADCState->registerState.regSL3CFG;
|
|
ADCn(ui32Module)->SL4CFG = pADCState->registerState.regSL4CFG;
|
|
ADCn(ui32Module)->SL5CFG = pADCState->registerState.regSL5CFG;
|
|
ADCn(ui32Module)->SL6CFG = pADCState->registerState.regSL6CFG;
|
|
ADCn(ui32Module)->SL7CFG = pADCState->registerState.regSL7CFG;
|
|
ADCn(ui32Module)->WULIM = pADCState->registerState.regWULIM;
|
|
ADCn(ui32Module)->WLLIM = pADCState->registerState.regWLLIM;
|
|
ADCn(ui32Module)->INTEN = pADCState->registerState.regINTEN;
|
|
ADCn(ui32Module)->CFG = pADCState->registerState.regCFG;
|
|
|
|
pADCState->registerState.bValid = false;
|
|
}
|
|
break;
|
|
|
|
case AM_HAL_SYSCTRL_NORMALSLEEP:
|
|
case AM_HAL_SYSCTRL_DEEPSLEEP:
|
|
if ( bRetainState )
|
|
{
|
|
pADCState->registerState.regSL0CFG = ADCn(ui32Module)->SL0CFG;
|
|
pADCState->registerState.regSL1CFG = ADCn(ui32Module)->SL1CFG;
|
|
pADCState->registerState.regSL2CFG = ADCn(ui32Module)->SL2CFG;
|
|
pADCState->registerState.regSL3CFG = ADCn(ui32Module)->SL3CFG;
|
|
pADCState->registerState.regSL4CFG = ADCn(ui32Module)->SL4CFG;
|
|
pADCState->registerState.regSL5CFG = ADCn(ui32Module)->SL5CFG;
|
|
pADCState->registerState.regSL6CFG = ADCn(ui32Module)->SL6CFG;
|
|
pADCState->registerState.regSL7CFG = ADCn(ui32Module)->SL7CFG;
|
|
pADCState->registerState.regWULIM = ADCn(ui32Module)->WULIM;
|
|
pADCState->registerState.regWLLIM = ADCn(ui32Module)->WLLIM;
|
|
pADCState->registerState.regINTEN = ADCn(ui32Module)->INTEN;
|
|
pADCState->registerState.regCFG = ADCn(ui32Module)->CFG;
|
|
|
|
pADCState->registerState.bValid = true;
|
|
}
|
|
|
|
//
|
|
// Disable the ADC power domain.
|
|
//
|
|
am_hal_pwrctrl_periph_disable(AM_HAL_PWRCTRL_PERIPH_ADC);
|
|
break;
|
|
|
|
default:
|
|
return AM_HAL_STATUS_INVALID_ARG;
|
|
}
|
|
|
|
//
|
|
// Return the status.
|
|
//
|
|
return AM_HAL_STATUS_SUCCESS;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// End Doxygen group.
|
|
//! @}
|
|
//
|
|
//*****************************************************************************
|