1366 lines
44 KiB
C
1366 lines
44 KiB
C
//*****************************************************************************
|
|
//
|
|
// am_hal_ios.c
|
|
//! @file
|
|
//!
|
|
//! @brief Functions for interfacing with the IO Slave module
|
|
//!
|
|
//! @addtogroup ios2 IO Slave (SPI/I2C)
|
|
//! @ingroup apollo2hal
|
|
//! @{
|
|
//
|
|
//*****************************************************************************
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Copyright (c) 2020, Ambiq Micro
|
|
// All rights reserved.
|
|
//
|
|
// Redistribution and use in source and binary forms, with or without
|
|
// modification, are permitted provided that the following conditions are met:
|
|
//
|
|
// 1. Redistributions of source code must retain the above copyright notice,
|
|
// this list of conditions and the following disclaimer.
|
|
//
|
|
// 2. Redistributions in binary form must reproduce the above copyright
|
|
// notice, this list of conditions and the following disclaimer in the
|
|
// documentation and/or other materials provided with the distribution.
|
|
//
|
|
// 3. Neither the name of the copyright holder nor the names of its
|
|
// contributors may be used to endorse or promote products derived from this
|
|
// software without specific prior written permission.
|
|
//
|
|
// Third party software included in this distribution is subject to the
|
|
// additional license terms as defined in the /docs/licenses directory.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
|
|
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
// POSSIBILITY OF SUCH DAMAGE.
|
|
//
|
|
// This is part of revision 2.4.2 of the AmbiqSuite Development Package.
|
|
//
|
|
//*****************************************************************************
|
|
|
|
#include <stdint.h>
|
|
#include <stdbool.h>
|
|
#include "am_mcu_apollo.h"
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// SRAM Buffer structure
|
|
//
|
|
//*****************************************************************************
|
|
typedef struct
|
|
{
|
|
uint8_t *pui8Data;
|
|
volatile uint32_t ui32WriteIndex;
|
|
volatile uint32_t ui32ReadIndex;
|
|
volatile uint32_t ui32Length;
|
|
uint32_t ui32FifoInc;
|
|
uint32_t ui32Capacity;
|
|
}
|
|
am_hal_ios_buffer_t;
|
|
|
|
am_hal_ios_buffer_t g_sSRAMBuffer;
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Forward declarations of static funcitons.
|
|
//
|
|
//*****************************************************************************
|
|
static void am_hal_ios_buffer_init(am_hal_ios_buffer_t *psBuffer,
|
|
void *pvArray, uint32_t ui32Bytes);
|
|
|
|
static void fifo_write(uint8_t *pui8Data, uint32_t ui32NumBytes);
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Function-like macros.
|
|
//
|
|
//*****************************************************************************
|
|
#define am_hal_ios_buffer_empty(psBuffer) \
|
|
((psBuffer)->ui32Length == 0)
|
|
|
|
#define am_hal_ios_buffer_full(psBuffer) \
|
|
((psBuffer)->ui32Length == (psBuffer)->ui32Capacity)
|
|
|
|
#define am_hal_ios_buffer_data_left(psBuffer) \
|
|
((psBuffer)->ui32Length)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Global Variables
|
|
//
|
|
//*****************************************************************************
|
|
volatile uint8_t * const am_hal_ios_pui8LRAM = (uint8_t *)REG_IOSLAVE_BASEADDR;
|
|
uint8_t *g_pui8FIFOBase = (uint8_t *) REG_IOSLAVE_BASEADDR;
|
|
uint8_t *g_pui8FIFOEnd = (uint8_t *) REG_IOSLAVE_BASEADDR;
|
|
uint8_t *g_pui8FIFOPtr = (uint8_t *) REG_IOSLAVE_BASEADDR;
|
|
uint8_t g_ui32HwFifoSize = 0;
|
|
uint32_t g_ui32FifoBaseOffset = 0;
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Checks to see if this processor is a Rev B2 device.
|
|
//
|
|
// This is needed to disable SHELBY-1654 workaround.
|
|
//
|
|
//*****************************************************************************
|
|
bool
|
|
isRevB2(void)
|
|
{
|
|
//
|
|
// Check to make sure the major rev is B and the minor rev is 2.
|
|
//
|
|
return ( (AM_REG(MCUCTRL, CHIPREV) & 0xFF) == \
|
|
(AM_REG_MCUCTRL_CHIPREV_REVMAJ_B | (AM_REG_MCUCTRL_CHIPREV_REVMIN_REV0 + 2)) );
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Enable the IOS in the power control block.
|
|
//!
|
|
//! This function enables the IOS module in the power control block.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_ios_pwrctrl_enable(void)
|
|
{
|
|
am_hal_pwrctrl_periph_enable(AM_HAL_PWRCTRL_IOS);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Disable the IOS in the power control block.
|
|
//!
|
|
//! This function disables the IOS module in the power control block.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_ios_pwrctrl_disable(void)
|
|
{
|
|
am_hal_pwrctrl_periph_disable(AM_HAL_PWRCTRL_IOS);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Enables the IOS module
|
|
//!
|
|
//! This function enables the IOSLAVE module using the IFCEN bitfield in the
|
|
//! IOSLAVE_CFG register.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_ios_enable(uint32_t ui32Module)
|
|
{
|
|
AM_REGn(IOSLAVE, ui32Module, CFG) |= AM_REG_IOSLAVE_CFG_IFCEN(1);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Disables the IOSLAVE module.
|
|
//!
|
|
//! This function disables the IOSLAVE module using the IFCEN bitfield in the
|
|
//! IOSLAVE_CFG register.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_ios_disable(uint32_t ui32Module)
|
|
{
|
|
AM_REGn(IOSLAVE, ui32Module, CFG) &= ~(AM_REG_IOSLAVE_CFG_IFCEN(1));
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Configure the IOS module.
|
|
//!
|
|
//! This function reads the an \e am_hal_ios_config_t structure and uses it to
|
|
//! set up the IO Slave module. Please see the information on the configuration
|
|
//! structure for more information on the parameters that may be set by this
|
|
//! function.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_ios_config(am_hal_ios_config_t *psConfig)
|
|
{
|
|
uint32_t ui32LRAMConfig;
|
|
|
|
am_hal_pwrctrl_periph_enable(AM_HAL_PWRCTRL_IOS);
|
|
|
|
//
|
|
// Record the FIFO parameters for later use.
|
|
//
|
|
g_pui8FIFOBase = (uint8_t *)(REG_IOSLAVE_BASEADDR + psConfig->ui32FIFOBase);
|
|
g_pui8FIFOEnd = (uint8_t *)(REG_IOSLAVE_BASEADDR + psConfig->ui32RAMBase);
|
|
g_ui32HwFifoSize = g_pui8FIFOEnd - g_pui8FIFOBase;
|
|
g_ui32FifoBaseOffset = psConfig->ui32FIFOBase;
|
|
|
|
//
|
|
// Calculate the value for the IO Slave FIFO configuration register.
|
|
//
|
|
ui32LRAMConfig = AM_REG_IOSLAVE_FIFOCFG_ROBASE(psConfig->ui32ROBase >> 3);
|
|
ui32LRAMConfig |= AM_REG_IOSLAVE_FIFOCFG_FIFOBASE(psConfig->ui32FIFOBase >> 3);
|
|
ui32LRAMConfig |= AM_REG_IOSLAVE_FIFOCFG_FIFOMAX(psConfig->ui32RAMBase >> 3);
|
|
|
|
//
|
|
// Just in case, disable the IOS
|
|
//
|
|
am_hal_ios_disable(0);
|
|
|
|
//
|
|
// Write the configuration register with the user's selected interface
|
|
// characteristics.
|
|
//
|
|
AM_REG(IOSLAVE, CFG) = psConfig->ui32InterfaceSelect;
|
|
|
|
//
|
|
// Write the FIFO configuration register to set the memory map for the LRAM.
|
|
//
|
|
AM_REG(IOSLAVE, FIFOCFG) = ui32LRAMConfig;
|
|
|
|
//
|
|
// Enable the IOS. The following configuration options can't be set while
|
|
// the IOS is disabled.
|
|
//
|
|
am_hal_ios_enable(0);
|
|
|
|
//
|
|
// Initialize the FIFO pointer to the beginning of the FIFO section.
|
|
//
|
|
am_hal_ios_fifo_ptr_set(psConfig->ui32FIFOBase);
|
|
|
|
//
|
|
// Write the FIFO threshold register.
|
|
//
|
|
AM_REG(IOSLAVE, FIFOTHR) = psConfig->ui32FIFOThreshold;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Set bits in the HOST side IOINTCTL register.
|
|
//!
|
|
//! This function may be used to set an interrupt bit to the host.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_ios_host_int_set(uint32_t ui32Interrupt)
|
|
{
|
|
//
|
|
// Set a bit that will cause an interrupt to the host.
|
|
//
|
|
AM_REG(IOSLAVE, IOINTCTL) = AM_REG_IOSLAVE_IOINTCTL_IOINTSET(ui32Interrupt);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Clear bits in the HOST side IOINTCTL register.
|
|
//!
|
|
//! This function may be used to clear an interrupt bit to the host.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_ios_host_int_clear(uint32_t ui32Interrupt)
|
|
{
|
|
//
|
|
// Clear bits that will cause an interrupt to the host.
|
|
//
|
|
AM_REG(IOSLAVE, IOINTCTL) = AM_REG_IOSLAVE_IOINTCTL_IOINTCLR(ui32Interrupt);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Get the bits in the HOST side IOINTCTL register.
|
|
//!
|
|
//! This function may be used to read the host side interrupt bits.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
am_hal_ios_host_int_get(void)
|
|
{
|
|
//
|
|
// return the value of the bits that will cause an interrupt to the host.
|
|
//
|
|
return AM_BFR(IOSLAVE, IOINTCTL, IOINT);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Get the enable bits in the HOST side IOINTCTL register.
|
|
//!
|
|
//! This function may be used to read the host side interrupt bits.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
am_hal_ios_host_int_enable_get(void)
|
|
{
|
|
//
|
|
// return the value of the bits that will cause an interrupt to the host.
|
|
//
|
|
return AM_BFR(IOSLAVE, IOINTCTL, IOINTEN);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Enable an IOS Access Interrupt.
|
|
//!
|
|
//! This function may be used to enable an interrupt to the NVIC.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_ios_access_int_enable(uint32_t ui32Interrupt)
|
|
{
|
|
//
|
|
// OR the desired interrupt into the enable register.
|
|
//
|
|
AM_REG(IOSLAVE, REGACCINTEN) |= ui32Interrupt;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Return all enabled IOS Access Interrupts.
|
|
//!
|
|
//! This function may be used to return all enabled IOS Access interrupts.
|
|
//!
|
|
//! @return the enabled interrrupts.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
am_hal_ios_access_int_enable_get(void)
|
|
{
|
|
//
|
|
// Return the enabled interrupts.
|
|
//
|
|
return AM_REG(IOSLAVE, REGACCINTEN);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Disable an IOS Access Interrupt.
|
|
//!
|
|
//! This function may be used to disable an interrupt to the NVIC.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_ios_access_int_disable(uint32_t ui32Interrupt)
|
|
{
|
|
//
|
|
// Clear the desired bit from the interrupt enable register.
|
|
//
|
|
AM_REG(IOSLAVE, REGACCINTEN) &= ~(ui32Interrupt);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Clear an IOS Access Interrupt.
|
|
//!
|
|
//! This function may be used to clear an interrupt to the NVIC.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_ios_access_int_clear(uint32_t ui32Interrupt)
|
|
{
|
|
//
|
|
// Use the interrupt clear register to deactivate the chosen interrupt.
|
|
//
|
|
AM_REG(IOSLAVE, REGACCINTCLR) = ui32Interrupt;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Set an IOS Access Interrupt.
|
|
//!
|
|
//! This function may be used to set an interrupt to the NVIC.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_ios_access_int_set(uint32_t ui32Interrupt)
|
|
{
|
|
//
|
|
// Use the interrupt set register to activate the chosen interrupt.
|
|
//
|
|
AM_REG(IOSLAVE, REGACCINTSET) = ui32Interrupt;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Check the status of an IOS Access Interrupt.
|
|
//!
|
|
//! @param bEnabledOnly - return only the enabled interrupt status.
|
|
//!
|
|
//! This function may be used to return the enabled interrupt status.
|
|
//!
|
|
//! @return the enabled interrupt status.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
am_hal_ios_access_int_status_get(bool bEnabledOnly)
|
|
{
|
|
if ( bEnabledOnly )
|
|
{
|
|
uint32_t u32RetVal = AM_REG(IOSLAVE, REGACCINTSTAT);
|
|
return u32RetVal & AM_REG(IOSLAVE, REGACCINTEN);
|
|
|
|
}
|
|
else
|
|
{
|
|
return AM_REG(IOSLAVE, REGACCINTSTAT);
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Enable an IOS Interrupt.
|
|
//!
|
|
//! @param ui32Interrupt - desired interrupts.
|
|
//!
|
|
//! This function may be used to enable an interrupt to the NVIC.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_ios_int_enable(uint32_t ui32Interrupt)
|
|
{
|
|
//
|
|
// OR the desired interrupt into the enable register.
|
|
//
|
|
AM_REG(IOSLAVE, INTEN) |= ui32Interrupt;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Return all enabled IOS Interrupts.
|
|
//!
|
|
//! This function may be used to return all enabled IOS interrupts.
|
|
//!
|
|
//! @return the enabled interrrupts.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
am_hal_ios_int_enable_get(void)
|
|
{
|
|
//
|
|
// Return the enabled interrupts.
|
|
//
|
|
return AM_REG(IOSLAVE, INTEN);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Disable an IOS Interrupt.
|
|
//!
|
|
//! @param ui32Interrupt - desired interrupts.
|
|
//!
|
|
//! This function may be used to disable an interrupt to the NVIC.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_ios_int_disable(uint32_t ui32Interrupt)
|
|
{
|
|
//
|
|
// Clear the desired bit from the interrupt enable register.
|
|
//
|
|
AM_REG(IOSLAVE, INTEN) &= ~(ui32Interrupt);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Clear an IOS Interrupt.
|
|
//!
|
|
//! @param ui32Interrupt - desired interrupts.
|
|
//!
|
|
//! This function may be used to clear an interrupt to the NVIC.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_ios_int_clear(uint32_t ui32Interrupt)
|
|
{
|
|
//
|
|
// Use the interrupt clear register to deactivate the chosen interrupt.
|
|
//
|
|
AM_REG(IOSLAVE, INTCLR) = ui32Interrupt;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Set an IOS Interrupt.
|
|
//!
|
|
//! @param ui32Interrupt - desired interrupts.
|
|
//!
|
|
//! This function may be used to set an interrupt to the NVIC.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_ios_int_set(uint32_t ui32Interrupt)
|
|
{
|
|
//
|
|
// Use the interrupt clear register to deactivate the chosen interrupt.
|
|
//
|
|
AM_REG(IOSLAVE, INTSET) = ui32Interrupt;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Write to the LRAM.
|
|
//!
|
|
//! @param ui32Offset - offset into the LRAM to write.
|
|
//! @param ui8Value - value to be written.
|
|
//!
|
|
//! This function writes ui8Value to offset ui32Offset inside the LRAM.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_ios_lram_write(uint32_t ui32Offset, uint8_t ui8Value)
|
|
{
|
|
//
|
|
// Write the LRAM.
|
|
//
|
|
am_hal_ios_pui8LRAM[ui32Offset] = ui8Value;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Read from the LRAM.
|
|
//!
|
|
//! @param ui32Offset - offset into the LRAM to read.
|
|
//!
|
|
//! This function read from offset ui32Offset inside the LRAM.
|
|
//!
|
|
//! @return the value at ui32Offset.
|
|
//
|
|
//*****************************************************************************
|
|
uint8_t
|
|
am_hal_ios_lram_read(uint32_t ui32Offset)
|
|
{
|
|
//
|
|
// Read the LRAM.
|
|
//
|
|
return am_hal_ios_pui8LRAM[ui32Offset];
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Check the status of an IOS Interrupt.
|
|
//!
|
|
//! @param bEnabledOnly - return only the enabled interrupt status.
|
|
//!
|
|
//! This function may be used to return the enabled interrupt status.
|
|
//!
|
|
//! @return the enabled interrupt status.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
am_hal_ios_int_status_get(bool bEnabledOnly)
|
|
{
|
|
if ( bEnabledOnly )
|
|
{
|
|
uint32_t u32RetVal = AM_REG(IOSLAVE, INTSTAT);
|
|
return u32RetVal & AM_REG(IOSLAVE, INTEN);
|
|
|
|
}
|
|
else
|
|
{
|
|
return AM_REG(IOSLAVE, INTSTAT);
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Check the amount of space used in the FIFO
|
|
//!
|
|
//! This function returns the available data in the overall FIFO yet to be
|
|
//! read by the host. This takes into account the SRAM buffer and hardware FIFO
|
|
//!
|
|
//! @return Bytes used in the Overall FIFO.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
am_hal_ios_fifo_space_used(void)
|
|
{
|
|
uint32_t ui32Val;
|
|
uint32_t ui32Primask;
|
|
//
|
|
// Start a critical section for thread safety.
|
|
//
|
|
ui32Primask = am_hal_interrupt_master_disable();
|
|
ui32Val = g_sSRAMBuffer.ui32Length;
|
|
ui32Val += AM_BFR(IOSLAVE, FIFOPTR, FIFOSIZ);
|
|
//
|
|
// End the critical section
|
|
//
|
|
am_hal_interrupt_master_set(ui32Primask);
|
|
return ui32Val;
|
|
}
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Check the amount of space left in the FIFO
|
|
//!
|
|
//! This function returns the available space in the overall FIFO to accept
|
|
//! new data. This takes into account the SRAM buffer and hardware FIFO
|
|
//!
|
|
//! @return Bytes left in the Overall FIFO.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
am_hal_ios_fifo_space_left(void)
|
|
{
|
|
uint32_t ui32Val;
|
|
uint32_t ui32Primask;
|
|
//
|
|
// Start a critical section for thread safety.
|
|
//
|
|
ui32Primask = am_hal_interrupt_master_disable();
|
|
//
|
|
// We waste one byte in HW FIFO
|
|
//
|
|
ui32Val = g_sSRAMBuffer.ui32Capacity + g_ui32HwFifoSize - 1;
|
|
ui32Val -= g_sSRAMBuffer.ui32Length;
|
|
ui32Val -= AM_BFR(IOSLAVE, FIFOPTR, FIFOSIZ);
|
|
//
|
|
// End the critical section
|
|
//
|
|
am_hal_interrupt_master_set(ui32Primask);
|
|
return ui32Val;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Check the amount of space left in the hardware FIFO
|
|
//!
|
|
//! This function reads the IOSLAVE FIFOPTR register and determines the amount
|
|
//! of space left in the IOS LRAM FIFO.
|
|
//!
|
|
//! @return Bytes left in the IOS FIFO.
|
|
//
|
|
//*****************************************************************************
|
|
static uint32_t
|
|
fifo_space_left(void)
|
|
{
|
|
//
|
|
// We waste one byte in HW FIFO
|
|
//
|
|
return ((uint32_t)g_ui32HwFifoSize- AM_BFR(IOSLAVE, FIFOPTR, FIFOSIZ) - 1);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Helper function for managing IOS FIFO writes.
|
|
//
|
|
//*****************************************************************************
|
|
static void
|
|
fifo_write(uint8_t *pui8Data, uint32_t ui32NumBytes)
|
|
{
|
|
uint8_t *pFifoPtr = g_pui8FIFOPtr;
|
|
uint8_t *pFifoBase = g_pui8FIFOBase;
|
|
uint8_t *pFifoEnd = g_pui8FIFOEnd;
|
|
while ( ui32NumBytes )
|
|
{
|
|
//
|
|
// Write the data to the FIFO
|
|
//
|
|
*pFifoPtr++ = *pui8Data++;
|
|
ui32NumBytes--;
|
|
|
|
//
|
|
// Make sure to wrap the FIFO pointer if necessary.
|
|
//
|
|
if ( pFifoPtr == pFifoEnd )
|
|
{
|
|
pFifoPtr = pFifoBase;
|
|
}
|
|
}
|
|
g_pui8FIFOPtr = pFifoPtr;
|
|
}
|
|
|
|
//
|
|
// Assembly code below assumes 8bit FIFOSIZ field aligned at a byte boundary
|
|
//
|
|
#if (((AM_REG_IOSLAVE_FIFOPTR_FIFOSIZ_M >> AM_REG_IOSLAVE_FIFOPTR_FIFOSIZ_S) != 0xFF) \
|
|
|| (AM_REG_IOSLAVE_FIFOPTR_FIFOSIZ_S & 0x3))
|
|
#error "FIFOSIZ not 8bit value aligned at byte offset"
|
|
#endif
|
|
|
|
//
|
|
// Byte offset of FIFOSIZ field in FIFOPTR register
|
|
//
|
|
#define BYTEOFFSET_FIFOSIZE (AM_REG_IOSLAVE_FIFOPTR_FIFOSIZ_S >> 3)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Helper function in assembly for implementing the ReSync
|
|
//
|
|
//*****************************************************************************
|
|
#if (defined (__ARMCC_VERSION)) && (__ARMCC_VERSION < 6000000)
|
|
__asm static void
|
|
internal_resync_fifoSize(uint32_t wrOffset, uint32_t maxFifoSize, uint32_t hwFifoPtrRegAddr)
|
|
{
|
|
push {r3, r4} // Save r3, r4 - used by this function
|
|
internal_resync_fifoSize_loop
|
|
ldr r4, [r2] // Load FIFOPTR register in r4
|
|
ubfx r3, r4, #AM_REG_IOSLAVE_FIFOPTR_FIFOSIZ_S, #8 // Extract hwFifoSize to r3
|
|
uxtb r4, r4 // Extract rdOffset in r4
|
|
subs r4, r0, r4 // fifoSize in r4 = wrOffset - rdOffset
|
|
it cc // if (wrOffset < rdOffset),
|
|
addcc r4, r4, r1 // fifoSize = maxFifoSize - (rdOffset - wrOffset)
|
|
cmp r3, r4 // (hwFifoSize != fifoSize)
|
|
beq internal_resync_fifosize_done
|
|
strb r4, [r2, #1] // Overwrite FIFOSIZ value with fifoSize
|
|
b internal_resync_fifoSize_loop // Repeat the check
|
|
internal_resync_fifosize_done
|
|
pop {r3, r4} // Restore registers
|
|
bx lr
|
|
}
|
|
#elif (defined (__ARMCC_VERSION)) && (__ARMCC_VERSION >= 6000000)
|
|
#if (AM_REG_IOSLAVE_FIFOPTR_FIFOSIZ_S != 8)
|
|
#error "AM_REG_IOSLAVE_FIFOPTR_FIFOSIZ_S not 8"
|
|
#endif
|
|
__attribute__((naked))
|
|
static void
|
|
internal_resync_fifoSize(uint32_t wrOffset, uint32_t maxFifoSize, uint32_t hwFifoPtrRegAddr)
|
|
{
|
|
__asm
|
|
(
|
|
" push {r3,r4}\n\t" // Save r3, r4 - used by this function
|
|
"__internal_resync_fifoSize_loop:\n\t"
|
|
" ldr r4, [r2]\n\t" // Load FIFOPTR register in r4
|
|
" ubfx r3, r4, #8, #8\n\t" // Extract hwFifoSize to r3
|
|
" uxtb r4, r4\n\t" // Extract rdOffset in r4
|
|
" subs r4, r0, r4\n\t" // fifoSize in r4 = wrOffset - rdOffset
|
|
" it cc\n\t" // if (wrOffset < rdOffset)
|
|
" addcc r4, r4, r1\n\t" // fifoSize = maxFifoSize - (rdOffset - wrOffset)
|
|
" cmp r3, r4\n\t" // (hwFifoSize != fifoSize)
|
|
" beq __internal_resync_fifosize_done\n\t"
|
|
" strb r4, [r2, #1]\n\t" // Overwrite FIFOSIZ value with fifoSize
|
|
" b __internal_resync_fifoSize_loop\n\t" // Repeat the check
|
|
"__internal_resync_fifosize_done:\n\t"
|
|
" pop {r3,r4}\n\t" // Restore registers
|
|
" bx lr\n\t"
|
|
);
|
|
}
|
|
#elif defined(__GNUC_STDC_INLINE__)
|
|
#if (AM_REG_IOSLAVE_FIFOPTR_FIFOSIZ_S != 8)
|
|
#error "AM_REG_IOSLAVE_FIFOPTR_FIFOSIZ_S not 8"
|
|
#endif
|
|
__attribute__((naked))
|
|
static void
|
|
internal_resync_fifoSize(uint32_t wrOffset, uint32_t maxFifoSize, uint32_t hwFifoPtrRegAddr)
|
|
{
|
|
__asm
|
|
(
|
|
" push {r3,r4}\n\t" // Save r3, r4 - used by this function
|
|
"__internal_resync_fifoSize_loop:\n\t"
|
|
" ldr r4, [r2]\n\t" // Load FIFOPTR register in r4
|
|
" ubfx r3, r4, #8, #8\n\t" // Extract hwFifoSize to r3
|
|
" uxtb r4, r4\n\t" // Extract rdOffset in r4
|
|
" subs r4, r0, r4\n\t" // fifoSize in r4 = wrOffset - rdOffset
|
|
" it cc\n\t" // if (wrOffset < rdOffset)
|
|
" addcc r4, r4, r1\n\t" // fifoSize = maxFifoSize - (rdOffset - wrOffset)
|
|
" cmp r3, r4\n\t" // (hwFifoSize != fifoSize)
|
|
" beq __internal_resync_fifosize_done\n\t"
|
|
" strb r4, [r2, #1]\n\t" // Overwrite FIFOSIZ value with fifoSize
|
|
" b __internal_resync_fifoSize_loop\n\t" // Repeat the check
|
|
"__internal_resync_fifosize_done:\n\t"
|
|
" pop {r3,r4}\n\t" // Restore registers
|
|
" bx lr\n\t"
|
|
);
|
|
}
|
|
#elif defined(__IAR_SYSTEMS_ICC__)
|
|
#if (AM_REG_IOSLAVE_FIFOPTR_FIFOSIZ_S != 8)
|
|
#error "AM_REG_IOSLAVE_FIFOPTR_FIFOSIZ_S not 8"
|
|
#endif
|
|
__stackless static void
|
|
internal_resync_fifoSize(uint32_t wrOffset, uint32_t maxFifoSize, uint32_t hwFifoPtrRegAddr)
|
|
{
|
|
__asm volatile (
|
|
" push {r3,r4}\n" // Save r3, r4 - used by this function
|
|
"__internal_resync_fifoSize_loop:\n"
|
|
" ldr r4, [r2]\n" // Load FIFOPTR register in r4
|
|
" ubfx r3, r4, #8, #8\n" // Extract hwFifoSize to r3
|
|
" uxtb r4, r4\n" // Extract rdOffset in r4
|
|
" subs r4, r0, r4\n" // fifoSize in r4 = wrOffset - rdOffset
|
|
" it cc\n"
|
|
" addcc r4, r4, r1\n" // fifoSize = maxFifoSize - (rdOffset - wrOffset)
|
|
" cmp r3, r4\n" // (fifoSize != hwFifoSize)
|
|
" beq __internal_resync_fifosize_done\n"
|
|
" strb r4, [r2, #1]\n" // Overwrite FIFOSIZ value with fifoSize
|
|
" b __internal_resync_fifoSize_loop\n" // Repeat the check
|
|
"__internal_resync_fifosize_done:\n"
|
|
" pop {r3,r4}\n" // Restore registers
|
|
" bx lr\n"
|
|
);
|
|
}
|
|
|
|
#else
|
|
static void
|
|
internal_resync_fifoSize(uint32_t wrOffset, uint32_t maxFifoSize, uint32_t hwFifoPtrRegAddr)
|
|
{
|
|
uint32_t fifoSize;
|
|
uint32_t hwFifoPtrReg;
|
|
uint32_t rdOffset;
|
|
uint32_t hwFifoSize;
|
|
|
|
hwFifoPtrReg = AM_REGVAL(hwFifoPtrRegAddr);
|
|
rdOffset = ((hwFifoPtrReg & AM_REG_IOSLAVE_FIFOPTR_FIFOPTR_M) >> AM_REG_IOSLAVE_FIFOPTR_FIFOPTR_S);
|
|
hwFifoSize = (hwFifoPtrReg & AM_REG_IOSLAVE_FIFOPTR_FIFOSIZ_M) >> AM_REG_IOSLAVE_FIFOPTR_FIFOSIZ_S;
|
|
// By wasting one byte in hardware FIFO, we're guaranteed that fifoSize does not need special handling for FULL FIFO case
|
|
fifoSize = ((wrOffset >= rdOffset) ? (wrOffset - rdOffset) : (maxFifoSize - (rdOffset - wrOffset)));
|
|
while ( fifoSize != hwFifoSize )
|
|
{
|
|
// Overwite correct FIFOSIZ
|
|
// Need to do a Byte Write to make sure the FIFOPTR is not overwritten
|
|
*((uint8_t *)(hwFifoPtrRegAddr + BYTEOFFSET_FIFOSIZE)) = fifoSize;
|
|
// Read back the register and check for consistency
|
|
hwFifoPtrReg = AM_REGVAL(hwFifoPtrRegAddr);
|
|
rdOffset = ((hwFifoPtrReg & AM_REG_IOSLAVE_FIFOPTR_FIFOPTR_M) >> AM_REG_IOSLAVE_FIFOPTR_FIFOPTR_S);
|
|
hwFifoSize = (hwFifoPtrReg & AM_REG_IOSLAVE_FIFOPTR_FIFOSIZ_M) >> AM_REG_IOSLAVE_FIFOPTR_FIFOSIZ_S;
|
|
// By wasting one byte in hardware FIFO, we're guaranteed that fifoSize does not need special handling for FULL FIFO case
|
|
fifoSize = ((wrOffset >= rdOffset) ? (wrOffset - rdOffset) : (hwFifoSize - (rdOffset - wrOffset)));
|
|
}
|
|
}
|
|
#endif
|
|
|
|
//
|
|
// Address of the FIFOPTR register
|
|
//
|
|
#define AM_REG_IOS_FIFOPTR (REG_IOSLAVE_BASEADDR + AM_REG_IOSLAVE_FIFOPTR_O)
|
|
|
|
// When the FIFO is being replenished by the SW, at the same time as host is
|
|
// reading from it, there is a possible race condition, where the hardware decrement
|
|
// of FIFOSIZ as a result of read gets overwritten by hardware increment due to
|
|
// write.
|
|
// This function re-sync's the FIFOSIZ to ensure such errors do not accumulate
|
|
void
|
|
resync_fifoSize(void)
|
|
{
|
|
uint32_t ui32Primask;
|
|
uint32_t wrOffset = (uint32_t)g_pui8FIFOPtr - (uint32_t)am_hal_ios_pui8LRAM;
|
|
//
|
|
// Start a critical section for thread safety.
|
|
//
|
|
ui32Primask = am_hal_interrupt_master_disable();
|
|
internal_resync_fifoSize(wrOffset, g_ui32HwFifoSize, AM_REG_IOS_FIFOPTR);
|
|
// Clear interrupts for IOS which could be spuriously triggered
|
|
AM_REG(IOSLAVE, REGACCINTCLR) = (AM_HAL_IOS_INT_FSIZE | AM_HAL_IOS_INT_FOVFL | AM_HAL_IOS_INT_FUNDFL);
|
|
//
|
|
// End the critical section
|
|
//
|
|
am_hal_interrupt_master_set(ui32Primask);
|
|
return;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Transfer any available data from the IOS SRAM buffer to the FIFO.
|
|
//!
|
|
//! This function is meant to be called from an interrupt handler for the
|
|
//! ioslave module. It checks the IOS FIFO interrupt status for a threshold
|
|
//! event, and transfers data from an SRAM buffer into the IOS FIFO.
|
|
//!
|
|
//! @param ui32Status should be set to the ios interrupt status at the time of
|
|
//! ISR entry.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_ios_fifo_service(uint32_t ui32Status)
|
|
{
|
|
uint32_t thresh;
|
|
uint32_t freeSpace, usedSpace, chunk1, chunk2, ui32WriteIndex;
|
|
|
|
//
|
|
// Check for FIFO size interrupts.
|
|
//
|
|
if ( ui32Status & AM_HAL_IOS_INT_FSIZE )
|
|
{
|
|
thresh = AM_BFR(IOSLAVE, FIFOTHR, FIFOTHR);
|
|
|
|
//
|
|
// While the FIFO is at or below threshold Add more data
|
|
// If Fifo level is above threshold, we're guaranteed an FSIZ interrupt
|
|
//
|
|
while ( g_sSRAMBuffer.ui32Length &&
|
|
((usedSpace = AM_BFR(IOSLAVE, FIFOPTR, FIFOSIZ)) <= thresh) )
|
|
{
|
|
//
|
|
// So, we do have some data in SRAM which needs to be moved to FIFO.
|
|
// A chunk of data is a continguous set of bytes in SRAM that can be
|
|
// written to FIFO. Determine the chunks of data from SRAM that can
|
|
// be written. Up to two chunks possible
|
|
//
|
|
ui32WriteIndex = g_sSRAMBuffer.ui32WriteIndex;
|
|
chunk1 = ((ui32WriteIndex > (uint32_t)g_sSRAMBuffer.ui32ReadIndex) ? \
|
|
(ui32WriteIndex - (uint32_t)g_sSRAMBuffer.ui32ReadIndex) : \
|
|
(g_sSRAMBuffer.ui32Capacity - (uint32_t)g_sSRAMBuffer.ui32ReadIndex));
|
|
chunk2 = g_sSRAMBuffer.ui32Length - chunk1;
|
|
// We waste one byte in HW FIFO
|
|
freeSpace = g_ui32HwFifoSize - usedSpace - 1;
|
|
// Write data in chunks
|
|
// Determine the chunks of data from SRAM that can be written
|
|
if ( chunk1 > freeSpace )
|
|
{
|
|
fifo_write((uint8_t *)(g_sSRAMBuffer.pui8Data + g_sSRAMBuffer.ui32ReadIndex), freeSpace);
|
|
//
|
|
// Advance the read index, wrapping if needed.
|
|
//
|
|
g_sSRAMBuffer.ui32ReadIndex += freeSpace;
|
|
// No need to check for wrap as we wrote less than chunk1
|
|
//
|
|
// Adjust the length value to reflect the change.
|
|
//
|
|
g_sSRAMBuffer.ui32Length -= freeSpace;
|
|
}
|
|
else
|
|
{
|
|
fifo_write((uint8_t *)(g_sSRAMBuffer.pui8Data + g_sSRAMBuffer.ui32ReadIndex), chunk1);
|
|
|
|
//
|
|
// Update the read index - wrapping as needed
|
|
//
|
|
g_sSRAMBuffer.ui32ReadIndex += chunk1;
|
|
g_sSRAMBuffer.ui32ReadIndex %= g_sSRAMBuffer.ui32Capacity;
|
|
//
|
|
// Adjust the length value to reflect the change.
|
|
//
|
|
g_sSRAMBuffer.ui32Length -= chunk1;
|
|
freeSpace -= chunk1;
|
|
|
|
if ( freeSpace && chunk2 )
|
|
{
|
|
if ( chunk2 > freeSpace )
|
|
{
|
|
fifo_write((uint8_t *)(g_sSRAMBuffer.pui8Data + g_sSRAMBuffer.ui32ReadIndex), freeSpace);
|
|
|
|
//
|
|
// Advance the read index, wrapping if needed.
|
|
//
|
|
g_sSRAMBuffer.ui32ReadIndex += freeSpace;
|
|
|
|
// No need to check for wrap in chunk2
|
|
//
|
|
// Adjust the length value to reflect the change.
|
|
//
|
|
g_sSRAMBuffer.ui32Length -= freeSpace;
|
|
}
|
|
else
|
|
{
|
|
fifo_write((uint8_t *)(g_sSRAMBuffer.pui8Data + g_sSRAMBuffer.ui32ReadIndex), chunk2);
|
|
//
|
|
// Advance the read index, wrapping if needed.
|
|
//
|
|
g_sSRAMBuffer.ui32ReadIndex += chunk2;
|
|
|
|
// No need to check for wrap in chunk2
|
|
//
|
|
// Adjust the length value to reflect the change.
|
|
//
|
|
g_sSRAMBuffer.ui32Length -= chunk2;
|
|
}
|
|
}
|
|
}
|
|
if (!isRevB2())
|
|
{
|
|
resync_fifoSize();
|
|
}
|
|
|
|
//
|
|
// Need to retake the FIFO space, after Threshold interrupt has been reenabled
|
|
// Clear any spurious FSIZE interrupt that might have got raised
|
|
//
|
|
AM_BFW(IOSLAVE, INTCLR, FSIZE, 1);
|
|
}
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Writes the specified number of bytes to the IOS fifo.
|
|
//!
|
|
//! @param pui8Data is a pointer to the data to be written to the fifo.
|
|
//! @param ui32NumBytes is the number of bytes to send.
|
|
//!
|
|
//! This function will write data from the caller-provided array to the IOS
|
|
//! LRAM FIFO. If there is no space in the LRAM FIFO, the data will be copied
|
|
//! to a temporary SRAM buffer instead.
|
|
//!
|
|
//! The maximum message size for the IO Slave is 1023 bytes.
|
|
//!
|
|
//! @note In order for SRAM copy operations in the function to work correctly,
|
|
//! the \e am_hal_ios_buffer_service() function must be called in the ISR for
|
|
//! the ioslave module.
|
|
//!
|
|
//! @return Number of bytes written (could be less than ui32NumBytes, if not enough space)
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
am_hal_ios_fifo_write(uint8_t *pui8Data, uint32_t ui32NumBytes)
|
|
{
|
|
uint32_t ui32FIFOSpace;
|
|
uint32_t ui32SRAMSpace;
|
|
uint32_t ui32SRAMLength;
|
|
uint32_t ui32Primask;
|
|
uint32_t totalBytes = ui32NumBytes;
|
|
|
|
//
|
|
// This operation will only work properly if an SRAM buffer has been
|
|
// allocated. Make sure that am_hal_ios_fifo_buffer_init() has been called,
|
|
// and the buffer pointer looks valid.
|
|
//
|
|
am_hal_debug_assert(g_sSRAMBuffer.pui8Data != 0);
|
|
|
|
if ( ui32NumBytes == 0 )
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
//
|
|
// Start a critical section for thread safety.
|
|
//
|
|
ui32Primask = am_hal_interrupt_master_disable();
|
|
|
|
ui32SRAMLength = g_sSRAMBuffer.ui32Length;
|
|
//
|
|
// End the critical section
|
|
//
|
|
am_hal_interrupt_master_set(ui32Primask);
|
|
|
|
//
|
|
// If the SRAM buffer is empty, we should just write directly to the FIFO.
|
|
//
|
|
if ( ui32SRAMLength == 0 )
|
|
{
|
|
ui32FIFOSpace = fifo_space_left();
|
|
|
|
//
|
|
// If the whole message fits, send it now.
|
|
//
|
|
if ( ui32NumBytes <= ui32FIFOSpace )
|
|
{
|
|
fifo_write(pui8Data, ui32NumBytes);
|
|
ui32NumBytes = 0;
|
|
}
|
|
else
|
|
{
|
|
fifo_write(pui8Data, ui32FIFOSpace);
|
|
ui32NumBytes -= ui32FIFOSpace;
|
|
pui8Data += ui32FIFOSpace;
|
|
};
|
|
if (!isRevB2())
|
|
{
|
|
resync_fifoSize();
|
|
}
|
|
}
|
|
|
|
//
|
|
// If there's still data, write it to the SRAM buffer.
|
|
//
|
|
if ( ui32NumBytes )
|
|
{
|
|
uint32_t idx, writeIdx, capacity, fifoSize;
|
|
ui32SRAMSpace = g_sSRAMBuffer.ui32Capacity - ui32SRAMLength;
|
|
|
|
writeIdx = g_sSRAMBuffer.ui32WriteIndex;
|
|
capacity = g_sSRAMBuffer.ui32Capacity;
|
|
//
|
|
// Make sure that the data will fit inside the SRAM buffer.
|
|
//
|
|
if ( ui32SRAMSpace > ui32NumBytes )
|
|
{
|
|
ui32SRAMSpace = ui32NumBytes;
|
|
}
|
|
|
|
//
|
|
// If the data will fit, write it to the SRAM buffer.
|
|
//
|
|
for ( idx = 0; idx < ui32SRAMSpace; idx++ )
|
|
{
|
|
g_sSRAMBuffer.pui8Data[(idx + writeIdx) % capacity] = pui8Data[idx];
|
|
}
|
|
|
|
ui32NumBytes -= idx;
|
|
//
|
|
// Start a critical section for thread safety before updating length & wrIdx.
|
|
//
|
|
ui32Primask = am_hal_interrupt_master_disable();
|
|
//
|
|
// Advance the write index, making sure to wrap if necessary.
|
|
//
|
|
g_sSRAMBuffer.ui32WriteIndex = (idx + writeIdx) % capacity;
|
|
|
|
//
|
|
// Update the length value appropriately.
|
|
//
|
|
g_sSRAMBuffer.ui32Length += idx;
|
|
//
|
|
// End the critical section
|
|
//
|
|
am_hal_interrupt_master_set(ui32Primask);
|
|
|
|
// It is possible that there is a race condition that the FIFO level has
|
|
// gone below the threshold by the time we set the wrIdx above, and hence
|
|
// we may never get the threshold interrupt to serve the SRAM data we
|
|
// just wrote
|
|
|
|
// If that is the case, explicitly generate the FSIZE interrupt from here
|
|
fifoSize = AM_BFR(IOSLAVE, FIFOPTR, FIFOSIZ);
|
|
if ( fifoSize <= AM_BFR(IOSLAVE, FIFOTHR, FIFOTHR) )
|
|
{
|
|
AM_BFW(IOSLAVE, INTSET, FSIZE, 1);
|
|
}
|
|
}
|
|
|
|
// Number of bytes written
|
|
g_sSRAMBuffer.ui32FifoInc += totalBytes - ui32NumBytes;
|
|
return (totalBytes - ui32NumBytes);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Writes the specified number of bytes to the IOS fifo simply.
|
|
//!
|
|
//! @param pui8Data is a pointer to the data to be written to the fifo.
|
|
//! @param ui32NumBytes is the number of bytes to send.
|
|
//!
|
|
//! This function will write data from the caller-provided array to the IOS
|
|
//! LRAM FIFO. This simple routine does not use SRAM buffering for large
|
|
//! messages. This function also updates the FIFOCTR.
|
|
//!
|
|
//! The maximum message size for the IO Slave is 128 bytes.
|
|
//!
|
|
//! @note Do note call the \e am_hal_ios_buffer_service() function in the ISR for
|
|
//! the ioslave module.
|
|
//!
|
|
//! @return
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_ios_fifo_write_simple(uint8_t *pui8Data, uint32_t ui32NumBytes)
|
|
{
|
|
uint32_t ui32FIFOSpace;
|
|
|
|
//
|
|
// Check the FIFO and the SRAM buffer to see where we have space.
|
|
//
|
|
ui32FIFOSpace = fifo_space_left();
|
|
|
|
//
|
|
// If the whole message fits, send it now.
|
|
//
|
|
if ( ui32NumBytes <= ui32FIFOSpace )
|
|
{
|
|
fifo_write(pui8Data, ui32NumBytes);
|
|
// Write FIFOINC
|
|
AM_BFW(IOSLAVE, FIFOINC, FIFOINC, ui32NumBytes);
|
|
}
|
|
else
|
|
{
|
|
//
|
|
// The message didn't fit. Try using am_hal_ios_fifo_write() instead.
|
|
//
|
|
am_hal_debug_assert_msg(0, "The requested IOS transfer didn't fit in"
|
|
"the LRAM FIFO. Try using am_hal_ios_fifo_write().");
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Sets the IOS FIFO pointer to the specified LRAM offset.
|
|
//!
|
|
//! @param ui32Offset is LRAM offset to set the FIFO pointer to.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_ios_fifo_ptr_set(uint32_t ui32Offset)
|
|
{
|
|
uint32_t ui32Primask;
|
|
|
|
//
|
|
// Start a critical section for thread safety.
|
|
//
|
|
ui32Primask = am_hal_interrupt_master_disable();
|
|
|
|
//
|
|
// Set the FIFO Update bit.
|
|
//
|
|
AM_REG(IOSLAVE, FUPD) = 0x1;
|
|
|
|
//
|
|
// Change the FIFO offset.
|
|
//
|
|
AM_REG(IOSLAVE, FIFOPTR) = ui32Offset;
|
|
|
|
//
|
|
// Clear the FIFO update bit.
|
|
//
|
|
AM_REG(IOSLAVE, FUPD) = 0x0;
|
|
|
|
//
|
|
// Set the global FIFO-pointer tracking variable.
|
|
//
|
|
g_pui8FIFOPtr = (uint8_t *) (REG_IOSLAVE_BASEADDR + ui32Offset);
|
|
|
|
//
|
|
// End the critical section.
|
|
//
|
|
am_hal_interrupt_master_set(ui32Primask);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Initialize an SRAM buffer for use with the IO Slave.
|
|
//
|
|
//*****************************************************************************
|
|
static void
|
|
am_hal_ios_buffer_init(am_hal_ios_buffer_t *psBuffer, void *pvArray,
|
|
uint32_t ui32Bytes)
|
|
{
|
|
psBuffer->ui32WriteIndex = 0;
|
|
psBuffer->ui32ReadIndex = 0;
|
|
psBuffer->ui32Length = 0;
|
|
psBuffer->ui32Capacity = ui32Bytes;
|
|
psBuffer->ui32FifoInc = 0;
|
|
psBuffer->pui8Data = (uint8_t *)pvArray;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Poll for all host side read activity to complete.
|
|
//!
|
|
//! Poll for all host side read activity to complete. Use this before
|
|
//! calling am_hal_ios_fifo_write_simple().
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_ios_read_poll_complete(void)
|
|
{
|
|
while ( AM_REG(IOSLAVE, FUPD) & AM_REG_IOSLAVE_FUPD_IOREAD_M );
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Initializes an SRAM buffer for the IOS FIFO.
|
|
//!
|
|
//! @param pui8Buffer is the SRAM buffer that will be used for IOS fifo data.
|
|
//! @param ui32BufferSize is the size of the SRAM buffer.
|
|
//!
|
|
//! This function provides the IOS HAL functions with working memory for
|
|
//! managing outgoing IOS FIFO transactions. It needs to be called at least
|
|
//! once before am_hal_ios_fifo_write() may be used.
|
|
//!
|
|
//! The recommended buffer size for the IOS FIFO is 1024 bytes.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_ios_fifo_buffer_init(uint8_t *pui8Buffer, uint32_t ui32NumBytes)
|
|
{
|
|
//
|
|
// Initialize the global SRAM buffer
|
|
// Total size, which is SRAM Buffer plus the hardware FIFO needs to be
|
|
// limited to 1023
|
|
//
|
|
if ( ui32NumBytes > (1023 - g_ui32HwFifoSize + 1) )
|
|
{
|
|
ui32NumBytes = (1023 - g_ui32HwFifoSize + 1);
|
|
}
|
|
|
|
am_hal_ios_buffer_init(&g_sSRAMBuffer, pui8Buffer, ui32NumBytes);
|
|
|
|
//
|
|
// Clear the FIFO State
|
|
//
|
|
AM_BFW(IOSLAVE, FIFOCTR, FIFOCTR, 0x0);
|
|
AM_BFW(IOSLAVE, FIFOPTR, FIFOSIZ, 0x0);
|
|
|
|
am_hal_ios_fifo_ptr_set(g_ui32FifoBaseOffset);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Update the FIFOCTR to inform host of available data to read.
|
|
//!
|
|
//! This function allows the application to indicate to HAL when it is safe to
|
|
//! update the FIFOCTR. This function needs to be used in conjunction with
|
|
//! am_hal_ios_fifo_write(), which itself does not update the FIFOCTR
|
|
//!
|
|
//! CAUTION:
|
|
//! Application needs to implement some sort of
|
|
//! synchronization with the host to make sure host is not reading FIFOCTR while
|
|
//! it is being updated by the MCU, since the FIFOCTR read over
|
|
//! IO is not an atomic operation. Otherwise, some other logic could be implemented
|
|
//! by the host to detect and disregard transient values of FIFOCTR (e.g. multiple
|
|
//! reads till it gets a stable value).
|
|
//! For Pre-B2 parts, it is necessary to have this synchronization guarantee that
|
|
//! Host is not doing any READ operation - be it for FIFOCTR or FIFO itself when
|
|
//! this call is made, as otherwise the FIFOCTR value may get corrupted.
|
|
//!
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_ios_update_fifoctr(void)
|
|
{
|
|
// Write FIFOINC
|
|
AM_BFW(IOSLAVE, FIFOINC, FIFOINC, g_sSRAMBuffer.ui32FifoInc);
|
|
g_sSRAMBuffer.ui32FifoInc = 0;
|
|
return;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// End the doxygen group
|
|
//! @}
|
|
//
|
|
//*****************************************************************************
|