683 lines
19 KiB
C
683 lines
19 KiB
C
//*****************************************************************************
|
|
//
|
|
// am_hal_rtc.c
|
|
//! @file
|
|
//!
|
|
//! @brief Functions for interfacing with the Real-Time Clock (RTC).
|
|
//!
|
|
//! @addtogroup rtc1 Real-Time Clock (RTC)
|
|
//! @ingroup apollo1hal
|
|
//! @{
|
|
//
|
|
//*****************************************************************************
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Copyright (c) 2020, Ambiq Micro
|
|
// All rights reserved.
|
|
//
|
|
// Redistribution and use in source and binary forms, with or without
|
|
// modification, are permitted provided that the following conditions are met:
|
|
//
|
|
// 1. Redistributions of source code must retain the above copyright notice,
|
|
// this list of conditions and the following disclaimer.
|
|
//
|
|
// 2. Redistributions in binary form must reproduce the above copyright
|
|
// notice, this list of conditions and the following disclaimer in the
|
|
// documentation and/or other materials provided with the distribution.
|
|
//
|
|
// 3. Neither the name of the copyright holder nor the names of its
|
|
// contributors may be used to endorse or promote products derived from this
|
|
// software without specific prior written permission.
|
|
//
|
|
// Third party software included in this distribution is subject to the
|
|
// additional license terms as defined in the /docs/licenses directory.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
|
|
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
// POSSIBILITY OF SUCH DAMAGE.
|
|
//
|
|
// This is part of revision 2.4.2 of the AmbiqSuite Development Package.
|
|
//
|
|
//*****************************************************************************
|
|
|
|
#include <stdint.h>
|
|
#include <stdbool.h>
|
|
#include "am_mcu_apollo.h"
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Converts a Binary Coded Decimal (BCD) byte to its Decimal form.
|
|
//
|
|
//*****************************************************************************
|
|
static uint8_t
|
|
bcd_to_dec(uint8_t ui8BCDByte)
|
|
{
|
|
return (((ui8BCDByte & 0xF0) >> 4) * 10) + (ui8BCDByte & 0x0F);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Converts a Decimal byte to its Binary Coded Decimal (BCD) form.
|
|
//
|
|
//*****************************************************************************
|
|
static uint8_t
|
|
dec_to_bcd(uint8_t ui8DecimalByte)
|
|
{
|
|
return (((ui8DecimalByte / 10) << 4) | (ui8DecimalByte % 10));
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Selects the clock source for the RTC.
|
|
//!
|
|
//! @param ui32OSC the clock source for the RTC.
|
|
//!
|
|
//! This function selects the clock source for the RTC.
|
|
//!
|
|
//! Valid values for ui32OSC are:
|
|
//!
|
|
//! AM_HAL_RTC_OSC_LFRC
|
|
//! AM_HAL_RTC_OSC_XT
|
|
//!
|
|
//! @return None
|
|
//!
|
|
//! @note After selection of the RTC oscillator, a 2 second delay occurs before
|
|
//! the new setting is reflected in status. Therefore the CLKGEN.STATUS.OMODE
|
|
//! bit will not reflect the new status until after the 2s wait period.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_rtc_osc_select(uint32_t ui32OSC)
|
|
{
|
|
//
|
|
// Set XT if flag is set.
|
|
// Otherwise configure for LFRC.
|
|
//
|
|
if (ui32OSC)
|
|
{
|
|
AM_REG(CLKGEN, OCTRL) |= AM_REG_CLKGEN_OCTRL_OSEL_M;
|
|
}
|
|
else
|
|
{
|
|
AM_REG(CLKGEN, OCTRL) &= ~AM_REG_CLKGEN_OCTRL_OSEL_M;
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Enable/Start the RTC oscillator.
|
|
//!
|
|
//! Starts the RTC oscillator.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_rtc_osc_enable(void)
|
|
{
|
|
//
|
|
// Start the RTC Oscillator.
|
|
//
|
|
AM_BFW(RTC, RTCCTL, RSTOP, 0);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Disable/Stop the RTC oscillator.
|
|
//!
|
|
//! Stops the RTC oscillator.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_rtc_osc_disable(void)
|
|
{
|
|
//
|
|
// Stop the RTC Oscillator.
|
|
//
|
|
AM_BFW(RTC, RTCCTL, RSTOP, 1);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Configures the RTC for 12 or 24 hour time keeping.
|
|
//!
|
|
//! @param b12Hour - A 'true' configures the RTC for 12 hour time keeping.
|
|
//!
|
|
//! Configures the RTC for 12 (true) or 24 (false) hour time keeping.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_rtc_time_12hour(bool b12Hour)
|
|
{
|
|
AM_BFW(RTC, RTCCTL, HR1224, b12Hour);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Enable selected RTC interrupts.
|
|
//!
|
|
//! @param ui32Interrupt - desired interrupts
|
|
//!
|
|
//! Enables the RTC interrupts.
|
|
//!
|
|
//! ui32Interrupt should be an OR of the following:
|
|
//!
|
|
//! AM_HAL_RTC_INT_ALM
|
|
//! AM_HAL_RTC_INT_OF
|
|
//! AM_HAL_RTC_INT_ACC
|
|
//! AM_HAL_RTC_INT_ACF
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_rtc_int_enable(uint32_t ui32Interrupt)
|
|
{
|
|
//
|
|
// Enable the interrupts.
|
|
//
|
|
AM_REG(RTC, INTEN) |= ui32Interrupt;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Return the enabled RTC interrupts.
|
|
//!
|
|
//! Returns the enabled RTC interrupts.
|
|
//!
|
|
//! @return enabled RTC interrupts. Return is a logical or of:
|
|
//!
|
|
//! AM_HAL_RTC_INT_ALM
|
|
//! AM_HAL_RTC_INT_OF
|
|
//! AM_HAL_RTC_INT_ACC
|
|
//! AM_HAL_RTC_INT_ACF
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
am_hal_rtc_int_enable_get(void)
|
|
{
|
|
//
|
|
// Read the RTC interrupt enable register, and return its contents.
|
|
//
|
|
return AM_REG(RTC, INTEN);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Disable selected RTC interrupts.
|
|
//!
|
|
//! @param ui32Interrupt - desired interrupts
|
|
//!
|
|
//! Disables the RTC interrupts.
|
|
//!
|
|
//! ui32Interrupt should be an OR of the following:
|
|
//!
|
|
//! AM_HAL_RTC_INT_ALM
|
|
//! AM_HAL_RTC_INT_OF
|
|
//! AM_HAL_RTC_INT_ACC
|
|
//! AM_HAL_RTC_INT_ACF
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_rtc_int_disable(uint32_t ui32Interrupt)
|
|
{
|
|
//
|
|
// Disable the interrupts.
|
|
//
|
|
AM_REG(RTC, INTEN) &= ~ui32Interrupt;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Sets the selected RTC interrupts.
|
|
//!
|
|
//! @param ui32Interrupt - desired interrupts
|
|
//!
|
|
//! Sets the RTC interrupts causing them to immediately trigger.
|
|
//!
|
|
//! ui32Interrupt should be an OR of the following:
|
|
//!
|
|
//! AM_HAL_RTC_INT_ALM
|
|
//! AM_HAL_RTC_INT_OF
|
|
//! AM_HAL_RTC_INT_ACC
|
|
//! AM_HAL_RTC_INT_ACF
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_rtc_int_set(uint32_t ui32Interrupt)
|
|
{
|
|
//
|
|
// Set the interrupts.
|
|
//
|
|
AM_REG(RTC, INTSET) = ui32Interrupt;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Clear selected RTC interrupts.
|
|
//!
|
|
//! @param ui32Interrupt - desired interrupts
|
|
//!
|
|
//! Clears the RTC interrupts.
|
|
//!
|
|
//! ui32Interrupt should be an OR of the following:
|
|
//!
|
|
//! AM_HAL_RTC_INT_ALM
|
|
//! AM_HAL_RTC_INT_OF
|
|
//! AM_HAL_RTC_INT_ACC
|
|
//! AM_HAL_RTC_INT_ACF
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_rtc_int_clear(uint32_t ui32Interrupt)
|
|
{
|
|
//
|
|
// Clear the interrupts.
|
|
//
|
|
AM_REG(RTC, INTCLR) = ui32Interrupt;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Returns the RTC interrupt status.
|
|
//!
|
|
//! @param bEnabledOnly - return the status of only the enabled interrupts.
|
|
//!
|
|
//! Returns the RTC interrupt status.
|
|
//!
|
|
//! @return Bitwise representation of the current interrupt status.
|
|
//!
|
|
//! The return value will be the logical OR of one or more of the following
|
|
//! values:
|
|
//!
|
|
//! AM_HAL_RTC_INT_ALM
|
|
//! AM_HAL_RTC_INT_OF
|
|
//! AM_HAL_RTC_INT_ACC
|
|
//! AM_HAL_RTC_INT_ACF
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
am_hal_rtc_int_status_get(bool bEnabledOnly)
|
|
{
|
|
//
|
|
// Get the interrupt status.
|
|
//
|
|
if (bEnabledOnly)
|
|
{
|
|
uint32_t u32RetVal;
|
|
u32RetVal = AM_REG(RTC, INTSTAT);
|
|
u32RetVal &= AM_REG(RTC, INTEN);
|
|
return u32RetVal &
|
|
(AM_HAL_RTC_INT_ALM | AM_HAL_RTC_INT_OF |
|
|
AM_HAL_RTC_INT_ACC | AM_HAL_RTC_INT_ACF);
|
|
}
|
|
else
|
|
{
|
|
return (AM_REG(RTC, INTSTAT) & (AM_HAL_RTC_INT_ALM |
|
|
AM_HAL_RTC_INT_OF |
|
|
AM_HAL_RTC_INT_ACC |
|
|
AM_HAL_RTC_INT_ACF));
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Set the Real Time Clock counter registers.
|
|
//!
|
|
//! @param *pTime - A pointer to the time structure.
|
|
//!
|
|
//! Sets the RTC counter registers to the supplied values.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_rtc_time_set(am_hal_rtc_time_t *pTime)
|
|
{
|
|
//
|
|
// Enable writing to the counters.
|
|
//
|
|
AM_BFW(RTC, RTCCTL, WRTC, 1);
|
|
|
|
//
|
|
// Write the RTCLOW register.
|
|
//
|
|
AM_REG(RTC, CTRLOW) =
|
|
AM_REG_RTC_CTRLOW_CTRHR(dec_to_bcd(pTime->ui32Hour)) |
|
|
AM_REG_RTC_CTRLOW_CTRMIN(dec_to_bcd(pTime->ui32Minute)) |
|
|
AM_REG_RTC_CTRLOW_CTRSEC(dec_to_bcd(pTime->ui32Second)) |
|
|
AM_REG_RTC_CTRLOW_CTR100(dec_to_bcd(pTime->ui32Hundredths));
|
|
|
|
//
|
|
// Write the RTCUP register.
|
|
//
|
|
AM_REG(RTC, CTRUP) =
|
|
AM_REG_RTC_CTRUP_CEB((pTime->ui32CenturyEnable)) |
|
|
AM_REG_RTC_CTRUP_CB((pTime->ui32Century)) |
|
|
AM_REG_RTC_CTRUP_CTRWKDY((pTime->ui32Weekday)) |
|
|
AM_REG_RTC_CTRUP_CTRYR(dec_to_bcd((pTime->ui32Year))) |
|
|
AM_REG_RTC_CTRUP_CTRMO(dec_to_bcd((pTime->ui32Month))) |
|
|
AM_REG_RTC_CTRUP_CTRDATE(dec_to_bcd((pTime->ui32DayOfMonth)));
|
|
|
|
//
|
|
// Disable writing to the counters.
|
|
//
|
|
AM_BFW(RTC, RTCCTL, WRTC, 0);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Get the Real Time Clock current time.
|
|
//!
|
|
//! @param *pTime - A pointer to the time structure to store the current time.
|
|
//!
|
|
//! Gets the RTC's current time
|
|
//!
|
|
//! @return 0 for success and 1 for error.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
am_hal_rtc_time_get(am_hal_rtc_time_t *pTime)
|
|
{
|
|
uint32_t ui32RTCLow, ui32RTCUp, ui32Value;
|
|
|
|
//
|
|
// Read the upper and lower RTC registers.
|
|
//
|
|
ui32RTCLow = AM_REG(RTC, CTRLOW);
|
|
ui32RTCUp = AM_REG(RTC, CTRUP);
|
|
|
|
//
|
|
// Break out the lower word.
|
|
//
|
|
ui32Value =
|
|
((ui32RTCLow & AM_REG_RTC_CTRLOW_CTRHR_M) >> AM_REG_RTC_CTRLOW_CTRHR_S);
|
|
pTime->ui32Hour = bcd_to_dec(ui32Value);
|
|
|
|
ui32Value =
|
|
((ui32RTCLow & AM_REG_RTC_CTRLOW_CTRMIN_M) >> AM_REG_RTC_CTRLOW_CTRMIN_S);
|
|
pTime->ui32Minute = bcd_to_dec(ui32Value);
|
|
|
|
ui32Value =
|
|
((ui32RTCLow & AM_REG_RTC_CTRLOW_CTRSEC_M) >> AM_REG_RTC_CTRLOW_CTRSEC_S);
|
|
pTime->ui32Second = bcd_to_dec(ui32Value);
|
|
|
|
ui32Value =
|
|
((ui32RTCLow & AM_REG_RTC_CTRLOW_CTR100_M) >> AM_REG_RTC_CTRLOW_CTR100_S);
|
|
pTime->ui32Hundredths = bcd_to_dec(ui32Value);
|
|
|
|
//
|
|
// Break out the upper word.
|
|
//
|
|
pTime->ui32ReadError =
|
|
((ui32RTCUp & AM_REG_RTC_CTRUP_CTERR_M) >> AM_REG_RTC_CTRUP_CTERR_S);
|
|
|
|
pTime->ui32CenturyEnable =
|
|
((ui32RTCUp & AM_REG_RTC_CTRUP_CEB_M) >> AM_REG_RTC_CTRUP_CEB_S);
|
|
|
|
pTime->ui32Century =
|
|
((ui32RTCUp & AM_REG_RTC_CTRUP_CB_M) >> AM_REG_RTC_CTRUP_CB_S);
|
|
|
|
ui32Value =
|
|
((ui32RTCUp & AM_REG_RTC_CTRUP_CTRWKDY_M) >> AM_REG_RTC_CTRUP_CTRWKDY_S);
|
|
pTime->ui32Weekday = bcd_to_dec(ui32Value);
|
|
|
|
ui32Value =
|
|
((ui32RTCUp & AM_REG_RTC_CTRUP_CTRYR_M) >> AM_REG_RTC_CTRUP_CTRYR_S);
|
|
pTime->ui32Year = bcd_to_dec(ui32Value);
|
|
|
|
ui32Value =
|
|
((ui32RTCUp & AM_REG_RTC_CTRUP_CTRMO_M) >> AM_REG_RTC_CTRUP_CTRMO_S);
|
|
pTime->ui32Month = bcd_to_dec(ui32Value);
|
|
|
|
ui32Value =
|
|
((ui32RTCUp & AM_REG_RTC_CTRUP_CTRDATE_M) >> AM_REG_RTC_CTRUP_CTRDATE_S);
|
|
pTime->ui32DayOfMonth = bcd_to_dec(ui32Value);
|
|
|
|
//
|
|
// Was there a read error?
|
|
//
|
|
if (pTime->ui32ReadError)
|
|
{
|
|
return 1;
|
|
}
|
|
else
|
|
{
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Sets the alarm repeat interval.
|
|
//!
|
|
//! @param ui32RepeatInterval the desired repeat interval.
|
|
//!
|
|
//! Sets the alarm repeat interval.
|
|
//!
|
|
//! Valid values for ui32RepeatInterval:
|
|
//!
|
|
//! AM_HAL_RTC_ALM_RPT_DIS
|
|
//! AM_HAL_RTC_ALM_RPT_YR
|
|
//! AM_HAL_RTC_ALM_RPT_MTH
|
|
//! AM_HAL_RTC_ALM_RPT_WK
|
|
//! AM_HAL_RTC_ALM_RPT_DAY
|
|
//! AM_HAL_RTC_ALM_RPT_HR
|
|
//! AM_HAL_RTC_ALM_RPT_MIN
|
|
//! AM_HAL_RTC_ALM_RPT_SEC
|
|
//! AM_HAL_RTC_ALM_RPT_10TH
|
|
//! AM_HAL_RTC_ALM_RPT_100TH
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_rtc_alarm_interval_set(uint32_t ui32RepeatInterval)
|
|
{
|
|
uint32_t ui32RptInt, ui32Alm100, ui32Value;
|
|
|
|
switch (ui32RepeatInterval)
|
|
{
|
|
//
|
|
// If repeat every 10th set RPT and ALM100 field accordinly
|
|
//
|
|
case AM_HAL_RTC_ALM_RPT_10TH:
|
|
ui32RptInt = AM_HAL_RTC_ALM_RPT_SEC;
|
|
ui32Alm100 = AM_HAL_RTC_ALM100_10TH;
|
|
break;
|
|
//
|
|
// If repeat every 100th set RPT and ALM100 field accordinly
|
|
//
|
|
case AM_HAL_RTC_ALM_RPT_100TH:
|
|
ui32RptInt = AM_HAL_RTC_ALM_RPT_SEC;
|
|
ui32Alm100 = AM_HAL_RTC_ALM100_100TH;
|
|
break;
|
|
//
|
|
// Otherwise set RPT as value passed. ALM100 values need to be 0xnn
|
|
// in this setting where n = 0-9.
|
|
//
|
|
default:
|
|
//
|
|
// Get the current value of the ALM100 field.
|
|
//
|
|
ui32Value = AM_BFR(RTC, ALMLOW, ALM100);
|
|
|
|
//
|
|
// If ALM100 was previous EVERY_10TH or EVERY_100TH reset to zero
|
|
// otherwise keep previous setting.
|
|
//
|
|
ui32Alm100 = ui32Value >= 0xF0 ? 0 : ui32Value;
|
|
|
|
//
|
|
// Set RPT value to value passed.
|
|
//
|
|
ui32RptInt = ui32RepeatInterval;
|
|
break;
|
|
}
|
|
|
|
//
|
|
// Write the interval to the register.
|
|
//
|
|
AM_BFW(RTC, RTCCTL, RPT, ui32RptInt);
|
|
|
|
//
|
|
// Write the Alarm 100 bits in the ALM100 register.
|
|
//
|
|
AM_BFW(RTC, ALMLOW, ALM100, ui32Alm100);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Sets the RTC's Alarm.
|
|
//!
|
|
//! @param *pTime - A pointer to the time structure.
|
|
//! @param ui32RepeatInterval - the desired alarm repeat interval.
|
|
//!
|
|
//! Set the Real Time Clock Alarm Parameters.
|
|
//!
|
|
//! Valid values for ui32RepeatInterval:
|
|
//!
|
|
//! AM_HAL_RTC_ALM_RPT_DIS
|
|
//! AM_HAL_RTC_ALM_RPT_YR
|
|
//! AM_HAL_RTC_ALM_RPT_MTH
|
|
//! AM_HAL_RTC_ALM_RPT_WK
|
|
//! AM_HAL_RTC_ALM_RPT_DAY
|
|
//! AM_HAL_RTC_ALM_RPT_HR
|
|
//! AM_HAL_RTC_ALM_RPT_MIN
|
|
//! AM_HAL_RTC_ALM_RPT_SEC
|
|
//! AM_HAL_RTC_ALM_RPT_10TH
|
|
//! AM_HAL_RTC_ALM_RPT_EVERY_100TH
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_rtc_alarm_set(am_hal_rtc_time_t *pTime, uint32_t ui32RepeatInterval)
|
|
{
|
|
uint8_t ui8Value = 0;
|
|
|
|
//
|
|
// Write the interval to the register.
|
|
//
|
|
AM_REG(RTC, RTCCTL) |=
|
|
AM_REG_RTC_RTCCTL_RPT(ui32RepeatInterval > 0x7 ? 0x7 : ui32RepeatInterval);
|
|
|
|
//
|
|
// Check if the interval is 10th or every 100th and track it in ui8Value.
|
|
//
|
|
if (ui32RepeatInterval == AM_HAL_RTC_ALM_RPT_10TH)
|
|
{
|
|
ui8Value = 0xF0;
|
|
}
|
|
else if (ui32RepeatInterval == AM_HAL_RTC_ALM_RPT_100TH)
|
|
{
|
|
ui8Value = 0xFF;
|
|
}
|
|
|
|
//
|
|
// Write the ALMUP register.
|
|
//
|
|
AM_REG(RTC, ALMUP) =
|
|
AM_REG_RTC_ALMUP_ALMWKDY((pTime->ui32Weekday)) |
|
|
AM_REG_RTC_ALMUP_ALMMO(dec_to_bcd((pTime->ui32Month))) |
|
|
AM_REG_RTC_ALMUP_ALMDATE(dec_to_bcd((pTime->ui32DayOfMonth)));
|
|
|
|
//
|
|
// Write the ALMLOW register.
|
|
//
|
|
AM_REG(RTC, ALMLOW) =
|
|
AM_REG_RTC_ALMLOW_ALMHR(dec_to_bcd(pTime->ui32Hour)) |
|
|
AM_REG_RTC_ALMLOW_ALMMIN(dec_to_bcd(pTime->ui32Minute)) |
|
|
AM_REG_RTC_ALMLOW_ALMSEC(dec_to_bcd(pTime->ui32Second)) |
|
|
AM_REG_RTC_ALMLOW_ALM100(dec_to_bcd(pTime->ui32Hundredths) | ui8Value);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Get the Real Time Clock Alarm Parameters
|
|
//!
|
|
//! @param *pTime - A pointer to the time structure to store the current alarm.
|
|
//!
|
|
//! Gets the RTC's Alarm time
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_rtc_alarm_get(am_hal_rtc_time_t *pTime)
|
|
{
|
|
uint32_t ui32ALMLow, ui32ALMUp, ui32Value;
|
|
|
|
//
|
|
// Read the upper and lower RTC registers.
|
|
//
|
|
ui32ALMLow = AM_REG(RTC, ALMLOW);
|
|
ui32ALMUp = AM_REG(RTC, ALMUP);
|
|
|
|
//
|
|
// Break out the lower word.
|
|
//
|
|
ui32Value =
|
|
((ui32ALMLow & AM_REG_RTC_ALMLOW_ALMHR_M) >> AM_REG_RTC_ALMLOW_ALMHR_S);
|
|
pTime->ui32Hour = bcd_to_dec(ui32Value);
|
|
|
|
ui32Value =
|
|
((ui32ALMLow & AM_REG_RTC_ALMLOW_ALMMIN_M) >> AM_REG_RTC_ALMLOW_ALMMIN_S);
|
|
pTime->ui32Minute = bcd_to_dec(ui32Value);
|
|
|
|
ui32Value =
|
|
((ui32ALMLow & AM_REG_RTC_ALMLOW_ALMSEC_M) >> AM_REG_RTC_ALMLOW_ALMSEC_S);
|
|
pTime->ui32Second = bcd_to_dec(ui32Value);
|
|
|
|
ui32Value =
|
|
((ui32ALMLow & AM_REG_RTC_ALMLOW_ALM100_M) >> AM_REG_RTC_ALMLOW_ALM100_S);
|
|
pTime->ui32Hundredths = bcd_to_dec(ui32Value);
|
|
|
|
//
|
|
// Break out the upper word.
|
|
//
|
|
pTime->ui32ReadError = 0;
|
|
pTime->ui32CenturyEnable = 0;
|
|
pTime->ui32Century = 0;
|
|
|
|
ui32Value =
|
|
((ui32ALMUp & AM_REG_RTC_ALMUP_ALMWKDY_M) >> AM_REG_RTC_ALMUP_ALMWKDY_S);
|
|
pTime->ui32Weekday = bcd_to_dec(ui32Value);
|
|
|
|
pTime->ui32Year = 0;
|
|
|
|
ui32Value =
|
|
((ui32ALMUp & AM_REG_RTC_ALMUP_ALMMO_M) >> AM_REG_RTC_ALMUP_ALMMO_S);
|
|
pTime->ui32Month = bcd_to_dec(ui32Value);
|
|
|
|
ui32Value =
|
|
((ui32ALMUp & AM_REG_RTC_ALMUP_ALMDATE_M) >> AM_REG_RTC_ALMUP_ALMDATE_S);
|
|
pTime->ui32DayOfMonth = bcd_to_dec(ui32Value);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// End Doxygen group.
|
|
//! @}
|
|
//
|
|
//*****************************************************************************
|