501 lines
14 KiB
C
501 lines
14 KiB
C
//*****************************************************************************
|
|
//
|
|
// am_hal_clkgen.c
|
|
//! @file
|
|
//!
|
|
//! @brief Functions for interfacing with the CLKGEN.
|
|
//!
|
|
//! @addtogroup clkgen1 Clock Generator (CLKGEN)
|
|
//! @ingroup apollo1hal
|
|
//! @{
|
|
//
|
|
//*****************************************************************************
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Copyright (c) 2020, Ambiq Micro
|
|
// All rights reserved.
|
|
//
|
|
// Redistribution and use in source and binary forms, with or without
|
|
// modification, are permitted provided that the following conditions are met:
|
|
//
|
|
// 1. Redistributions of source code must retain the above copyright notice,
|
|
// this list of conditions and the following disclaimer.
|
|
//
|
|
// 2. Redistributions in binary form must reproduce the above copyright
|
|
// notice, this list of conditions and the following disclaimer in the
|
|
// documentation and/or other materials provided with the distribution.
|
|
//
|
|
// 3. Neither the name of the copyright holder nor the names of its
|
|
// contributors may be used to endorse or promote products derived from this
|
|
// software without specific prior written permission.
|
|
//
|
|
// Third party software included in this distribution is subject to the
|
|
// additional license terms as defined in the /docs/licenses directory.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
|
|
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
// POSSIBILITY OF SUCH DAMAGE.
|
|
//
|
|
// This is part of revision 2.4.2 of the AmbiqSuite Development Package.
|
|
//
|
|
//*****************************************************************************
|
|
|
|
#include <stdint.h>
|
|
#include <stdbool.h>
|
|
#include "am_mcu_apollo.h"
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Select the clock divisor for the main system clock.
|
|
//!
|
|
//! @param ui32ClockSetting - The divisor value for the system clock.
|
|
//!
|
|
//! This function can be used to select the frequency of the main system clock.
|
|
//! The \e ui32ClockSetting parameter should be set to one of the following
|
|
//! values:
|
|
//!
|
|
//! AM_HAL_CLKGEN_SYSCLK_24MHZ
|
|
//! AM_HAL_CLKGEN_SYSCLK_12MHZ
|
|
//! AM_HAL_CLKGEN_SYSCLK_8MHZ
|
|
//! AM_HAL_CLKGEN_SYSCLK_6MHZ
|
|
//! AM_HAL_CLKGEN_SYSCLK_4_8MHZ
|
|
//! AM_HAL_CLKGEN_SYSCLK_4MHZ
|
|
//! AM_HAL_CLKGEN_SYSCLK_3_4MHZ
|
|
//! AM_HAL_CLKGEN_SYSCLK_3MHZ
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_clkgen_sysclk_select(uint32_t ui32ClockSetting)
|
|
{
|
|
//
|
|
// Unlock the clock control register.
|
|
//
|
|
AM_REG(CLKGEN, CLKKEY) = AM_REG_CLKGEN_CLKKEY_KEYVAL;
|
|
|
|
//
|
|
// Set the HFRC divisor to the user-selected value.
|
|
//
|
|
AM_REG(CLKGEN, CCTRL) = ui32ClockSetting;
|
|
|
|
//
|
|
// Lock the clock configuration registers.
|
|
//
|
|
AM_REG(CLKGEN, CLKKEY) = 0;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Get the current system clock frequency.
|
|
//!
|
|
//! This function can be used to determine the frequency of the main system
|
|
//! clock. The return value is the system clock frequency measured in hertz.
|
|
//!
|
|
//! @return System clock frequency in Hz
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
am_hal_clkgen_sysclk_get(void)
|
|
{
|
|
uint32_t ui32ClockSetting;
|
|
|
|
//
|
|
// Read the value of the clock divider.
|
|
//
|
|
ui32ClockSetting = AM_BFR(CLKGEN, CCTRL, CORESEL);
|
|
|
|
switch ( ui32ClockSetting )
|
|
{
|
|
case AM_HAL_CLKGEN_SYSCLK_24MHZ:
|
|
return 24000000;
|
|
case AM_HAL_CLKGEN_SYSCLK_12MHZ:
|
|
return 12000000;
|
|
case AM_HAL_CLKGEN_SYSCLK_8MHZ:
|
|
return 8000000;
|
|
case AM_HAL_CLKGEN_SYSCLK_6MHZ:
|
|
return 6000000;
|
|
case AM_HAL_CLKGEN_SYSCLK_4_8MHZ:
|
|
return 4800000;
|
|
case AM_HAL_CLKGEN_SYSCLK_4MHZ:
|
|
return 4000000;
|
|
case AM_HAL_CLKGEN_SYSCLK_3_4MHZ:
|
|
return 3428571;
|
|
case AM_HAL_CLKGEN_SYSCLK_3MHZ:
|
|
return 3000000;
|
|
default:
|
|
return 0xFFFFFFFF;
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Enable selected CLKGEN Interrupts.
|
|
//!
|
|
//! Use this function to enable the interrupts.
|
|
//!
|
|
//! @param ui32Interrupt - Use the macro bit fields provided in am_hal_clkgen.h
|
|
//!
|
|
//! @return None
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_clkgen_int_enable(uint32_t ui32Interrupt)
|
|
{
|
|
//
|
|
// Enable the interrupts.
|
|
//
|
|
AM_REG(CLKGEN, INTEN) |= ui32Interrupt;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Return enabled CLKGEN Interrupts.
|
|
//!
|
|
//! Use this function to get all enabled CLKGEN interrupts.
|
|
//!
|
|
//! @return enabled CLKGEN interrupts.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
am_hal_clkgen_int_enable_get(void)
|
|
{
|
|
//
|
|
// Return the enabled interrupts.
|
|
//
|
|
return AM_REG(CLKGEN, INTEN);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Disable selected CLKGEN Interrupts.
|
|
//!
|
|
//! Use this function to disable the CLKGEN interrupts.
|
|
//!
|
|
//! @param ui32Interrupt - Use the macro bit fields provided in am_hal_clkgen.h
|
|
//!
|
|
//! @return None
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_clkgen_int_disable(uint32_t ui32Interrupt)
|
|
{
|
|
//
|
|
// Disable the interrupts.
|
|
//
|
|
AM_REG(CLKGEN, INTEN) &= ~ui32Interrupt;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Sets the interrupt status.
|
|
//!
|
|
//! @param ui32IntFlags interrupts to be enabled.
|
|
//!
|
|
//! This function sets the interrupts.
|
|
//!
|
|
//! Valid values for ui32IntFlags are:
|
|
//!
|
|
//! AM_HAL_CLKGEN_INT_RTC_ALARM
|
|
//! AM_HAL_CLKGEN_INT_XT_FAIL
|
|
//! AM_HAL_CLKGEN_INT_AUTOCAL_COMPLETE
|
|
//! AM_HAL_CLKGEN_INT AUTOCAL_FAIL
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_clkgen_int_set(uint32_t ui32Interrupt)
|
|
{
|
|
//
|
|
// Set the interrupt status.
|
|
//
|
|
AM_REG(CLKGEN, INTSET) = ui32Interrupt;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Gets the interrupt configuration.
|
|
//!
|
|
//! @param bEnabledOnly - return the status of only the enabled interrupts.
|
|
//!
|
|
//! This function gets the currently configured interrupts.
|
|
//!
|
|
//! @return the configured interrupts.
|
|
//!
|
|
//! Possible values for the return are:
|
|
//!
|
|
//! AM_HAL_CLKGEN_INT_RTC_ALARM
|
|
//! AM_HAL_CLKGEN_INT_XT_FAIL
|
|
//! AM_HAL_CLKGEN_INT_AUTOCAL_COMPLETE
|
|
//! AM_HAL_CLKGEN_INT AUTOCAL_FAIL
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
am_hal_clkgen_int_status_get(bool bEnabledOnly)
|
|
{
|
|
//
|
|
// Return the status.
|
|
//
|
|
if ( bEnabledOnly )
|
|
{
|
|
uint32_t u32RetVal = AM_REG(CLKGEN, INTSTAT);
|
|
u32RetVal &= AM_REG(CLKGEN, INTEN);
|
|
return u32RetVal;
|
|
}
|
|
else
|
|
{
|
|
return AM_REG(CLKGEN, INTSTAT);
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Clears the interrupts.
|
|
//!
|
|
//! @param ui32IntFlags interrupts to be cleared.
|
|
//!
|
|
//! This function clears the interrupts.
|
|
//!
|
|
//! Valid values for ui32IntFlags are:
|
|
//!
|
|
//! AM_HAL_CLKGEN_INT_RTC_ALARM
|
|
//! AM_HAL_CLKGEN_INT_XT_FAIL
|
|
//! AM_HAL_CLKGEN_INT_AUTOCAL_COMPLETE
|
|
//! AM_HAL_CLKGEN_INT AUTOCAL_FAIL
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_clkgen_int_clear(uint32_t ui32Interrupt)
|
|
{
|
|
//
|
|
// Clear the interrupts.
|
|
//
|
|
AM_REG(CLKGEN, INTCLR) = ui32Interrupt;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Starts the desired oscillator(s) (OSC).
|
|
//!
|
|
//! @param ui32OscFlags oscillator(s) to start.
|
|
//!
|
|
//! This function starts the desired oscillator(s) (OSC).
|
|
//!
|
|
//! Valid values for ui32OscFlags are:
|
|
//!
|
|
//! AM_HAL_CLKGEN_OSC_LFRC
|
|
//! AM_HAL_CLKGEN_OSC_XT
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_clkgen_osc_start(uint32_t ui32OscFlags)
|
|
{
|
|
if ( ui32OscFlags & (AM_HAL_CLKGEN_OSC_LFRC | AM_HAL_CLKGEN_OSC_XT) )
|
|
{
|
|
//
|
|
// Start the oscillator(s).
|
|
// Note that these bits are cleared in order to enable the oscillator.
|
|
//
|
|
AM_REG(CLKGEN, OCTRL) &= ~ui32OscFlags;
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Stops the desired oscillator(s) (OSC).
|
|
//!
|
|
//! @param ui32OscFlags oscillator(s) to stop.
|
|
//!
|
|
//! This function stops the desired oscillator(s) (OSC).
|
|
//!
|
|
//! Valid values for ui32OscFlags are:
|
|
//!
|
|
//! AM_HAL_CLKGEN_OSC_LFRC
|
|
//! AM_HAL_CLKGEN_OSC_XT
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_clkgen_osc_stop(uint32_t ui32OscFlags)
|
|
{
|
|
if ( ui32OscFlags & (AM_HAL_CLKGEN_OSC_LFRC | AM_HAL_CLKGEN_OSC_XT) )
|
|
{
|
|
//
|
|
// Stop the oscillator(s).
|
|
// Note that these bits are set in order to stop the oscillator.
|
|
//
|
|
AM_REG(CLKGEN, OCTRL) |= ui32OscFlags;
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Enables the clock out signal.
|
|
//!
|
|
//! @param ui32Signal desired location for the clock out signal.
|
|
//!
|
|
//! This function enables the clock out signal. See am_reg_clkgen.h for
|
|
//! available signals.
|
|
//!
|
|
//! ie. AM_REG_CLKGEN_CLKOUT_CKSEL_HFRC
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_clkgen_clkout_enable(uint32_t ui32Signal)
|
|
{
|
|
//
|
|
// Enable the clock out on desired signal.
|
|
//
|
|
AM_REG(CLKGEN, CLKOUT) = AM_REG_CLKGEN_CLKOUT_CKEN_M | ui32Signal;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Disables the clock out signal.
|
|
//!
|
|
//! This function disables the clock out signal.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_clkgen_clkout_disable(void)
|
|
{
|
|
//
|
|
// Disable the clock out.
|
|
//
|
|
AM_REG(CLKGEN, CLKOUT) = 0;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Enable UART system clock.
|
|
//!
|
|
//! This function enables or disables the UART system clock.
|
|
//!
|
|
//! @param ui32Module must be 0 for Apollo.
|
|
//! @param ui32UartEn is one of the following.
|
|
//! AM_HAL_CLKGEN_UARTEN_DIS
|
|
//! AM_HAL_CLKGEN_UARTEN_EN
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_clkgen_uarten_set(uint32_t ui32Module, uint32_t ui32UartEn)
|
|
{
|
|
uint32_t ui32Mask;
|
|
|
|
if ( (ui32Module >= AM_REG_UART_NUM_MODULES) ||
|
|
(ui32UartEn > AM_HAL_CLKGEN_UARTEN_EN) )
|
|
{
|
|
return;
|
|
}
|
|
|
|
ui32UartEn <<= (ui32Module * AM_HAL_CLKGEN_UARTEN_UARTENn_S(ui32Module));
|
|
ui32Mask = ~(AM_HAL_CLKGEN_UARTEN_UARTENn_M(ui32Module));
|
|
|
|
//
|
|
// Begin critical section.
|
|
//
|
|
AM_CRITICAL_BEGIN
|
|
|
|
//
|
|
// Set the UART clock
|
|
//
|
|
AM_REG(CLKGEN, UARTEN) &= ui32Mask;
|
|
AM_REG(CLKGEN, UARTEN) |= ui32UartEn;
|
|
|
|
//
|
|
// Begin critical section.
|
|
//
|
|
AM_CRITICAL_END
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Enables HFRC auto-adjustment at the specified interval.
|
|
//!
|
|
//! @param ui32Warmup - How long to give the HFRC to stabilize during each
|
|
//! calibration attempt.
|
|
//! @param ui32Frequency - How often the auto-adjustment should happen.
|
|
//!
|
|
//! This function enables HFRC auto-adjustment from an external crystal
|
|
//! oscillator even when the crystal is not normally being used.
|
|
//!
|
|
//! ui32Warmup should be one of the following values:
|
|
//!
|
|
//! AM_REG_CLKGEN_HFADJ_HFWARMUP_1SEC
|
|
//! AM_REG_CLKGEN_HFADJ_HFWARMUP_2SEC
|
|
//!
|
|
//! ui32Frequency should be one of the following values:
|
|
//!
|
|
//! AM_REG_CLKGEN_HFADJ_HFADJCK_4SEC
|
|
//! AM_REG_CLKGEN_HFADJ_HFADJCK_16SEC
|
|
//! AM_REG_CLKGEN_HFADJ_HFADJCK_32SEC
|
|
//! AM_REG_CLKGEN_HFADJ_HFADJCK_64SEC
|
|
//! AM_REG_CLKGEN_HFADJ_HFADJCK_128SEC
|
|
//! AM_REG_CLKGEN_HFADJ_HFADJCK_256SEC
|
|
//! AM_REG_CLKGEN_HFADJ_HFADJCK_512SEC
|
|
//! AM_REG_CLKGEN_HFADJ_HFADJCK_1024SEC
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_clkgen_hfrc_adjust_enable(uint32_t ui32Warmup, uint32_t ui32Frequency)
|
|
{
|
|
//
|
|
// Set the HFRC Auto-adjust register for the user's chosen settings. Assume
|
|
// that the HFRC should be calibrated to 24 MHz and that the crystal is
|
|
// running at 32.768 kHz.
|
|
//
|
|
AM_REG(CLKGEN, HFADJ) = (ui32Warmup |
|
|
ui32Frequency |
|
|
AM_REG_CLKGEN_HFADJ_HFXTADJ(732) |
|
|
AM_REG_CLKGEN_HFADJ_HFADJEN_EN);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Disables HFRC auto-adjustment.
|
|
//!
|
|
//! This function disables HFRC auto-adjustment.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_clkgen_hfrc_adjust_disable(void)
|
|
{
|
|
//
|
|
// Disable the clock out.
|
|
//
|
|
AM_REG(CLKGEN, HFADJ) = (AM_REG_CLKGEN_HFADJ_HFXTADJ(732) |
|
|
AM_REG_CLKGEN_HFADJ_HFADJEN_DIS);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// End Doxygen group.
|
|
//! @}
|
|
//
|
|
//*****************************************************************************
|