Name: ===== adc_lpmode2 Description: ============ This example takes samples with the ADC at 1Hz in lowest power mode. Purpose: ======== To demonstrate the lowest possible power usage of the ADC. The example powers off the ADC between samples. CTIMER-A1 is used to drive the process. The CTIMER ISR reconfigures the ADC from scratch and triggers each sample. The ADC ISR stores the sample and shuts down the ADC. Additional Information: ======================= The ADC_EXAMPLE_DEBUG flag is used to display information in the example to show that it is operating. This should be set to 0 for true low power operation. Printing takes place over the ITM at 1M Baud. ******************************************************************************