Name:
=====
adc_lpmode2
Description:
============
This example takes samples with the ADC at 1Hz in lowest power mode.
Purpose:
========
To demonstrate the lowest possible power usage of the ADC. The
example powers off the ADC between samples. CTIMER-A1 is used to drive the
process. The CTIMER ISR reconfigures the ADC from scratch and triggers each
sample. The ADC ISR stores the sample and shuts down the ADC.
Additional Information:
=======================
The ADC_EXAMPLE_DEBUG flag is used to display information in the example to
show that it is operating. This should be set to 0 for true low power
operation.
Printing takes place over the ITM at 1M Baud.
******************************************************************************
