354 lines
10 KiB
C
354 lines
10 KiB
C
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
// am_hal_systick.c
|
||
|
|
//! @file
|
||
|
|
//!
|
||
|
|
//! @brief Functions for interfacing with the SYSTICK
|
||
|
|
//!
|
||
|
|
//! @addtogroup systick1 System Timer (SYSTICK)
|
||
|
|
//! @ingroup apollo1hal
|
||
|
|
//! @{
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
// Copyright (c) 2020, Ambiq Micro
|
||
|
|
// All rights reserved.
|
||
|
|
//
|
||
|
|
// Redistribution and use in source and binary forms, with or without
|
||
|
|
// modification, are permitted provided that the following conditions are met:
|
||
|
|
//
|
||
|
|
// 1. Redistributions of source code must retain the above copyright notice,
|
||
|
|
// this list of conditions and the following disclaimer.
|
||
|
|
//
|
||
|
|
// 2. Redistributions in binary form must reproduce the above copyright
|
||
|
|
// notice, this list of conditions and the following disclaimer in the
|
||
|
|
// documentation and/or other materials provided with the distribution.
|
||
|
|
//
|
||
|
|
// 3. Neither the name of the copyright holder nor the names of its
|
||
|
|
// contributors may be used to endorse or promote products derived from this
|
||
|
|
// software without specific prior written permission.
|
||
|
|
//
|
||
|
|
// Third party software included in this distribution is subject to the
|
||
|
|
// additional license terms as defined in the /docs/licenses directory.
|
||
|
|
//
|
||
|
|
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||
|
|
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||
|
|
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||
|
|
// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
|
||
|
|
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||
|
|
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||
|
|
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
||
|
|
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
||
|
|
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||
|
|
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||
|
|
// POSSIBILITY OF SUCH DAMAGE.
|
||
|
|
//
|
||
|
|
// This is part of revision 2.4.2 of the AmbiqSuite Development Package.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
|
||
|
|
#include <stdint.h>
|
||
|
|
#include <stdbool.h>
|
||
|
|
#include "am_mcu_apollo.h"
|
||
|
|
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
// Macro definitions
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
#define SYSTICK_MAX_TICKS ((1 << 24)-1)
|
||
|
|
#define MAX_U32 (0xffffffff)
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! @brief Start the SYSTICK.
|
||
|
|
//!
|
||
|
|
//! This function starts the systick timer.
|
||
|
|
//!
|
||
|
|
//! @note This timer does not run in deep-sleep mode as it runs from the core
|
||
|
|
//! clock, which is gated in deep-sleep. If a timer is needed in deep-sleep use
|
||
|
|
//! one of the ctimers instead. Also to note is this timer will consume higher
|
||
|
|
//! power than the ctimers.
|
||
|
|
//!
|
||
|
|
//! @return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
am_hal_systick_start(void)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Start the systick timer.
|
||
|
|
//
|
||
|
|
AM_REG(SYSTICK, SYSTCSR) |= AM_REG_SYSTICK_SYSTCSR_ENABLE_M;
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! @brief Stop the SYSTICK.
|
||
|
|
//!
|
||
|
|
//! This function stops the systick timer.
|
||
|
|
//!
|
||
|
|
//! @note This timer does not run in deep-sleep mode as it runs from the core
|
||
|
|
//! clock, which is gated in deep-sleep. If a timer is needed in deep-sleep use
|
||
|
|
//! one of the ctimers instead. Also to note is this timer will consume higher
|
||
|
|
//! power than the ctimers.
|
||
|
|
//!
|
||
|
|
//! @return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
am_hal_systick_stop(void)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Stop the systick timer.
|
||
|
|
//
|
||
|
|
AM_REG(SYSTICK, SYSTCSR) &= ~AM_REG_SYSTICK_SYSTCSR_ENABLE_M;
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! @brief Enable the interrupt in the SYSTICK.
|
||
|
|
//!
|
||
|
|
//! This function enables the interupt in the systick timer.
|
||
|
|
//!
|
||
|
|
//! @return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
am_hal_systick_int_enable(void)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Enable the systick timer interrupt.
|
||
|
|
//
|
||
|
|
AM_REG(SYSTICK, SYSTCSR) |= AM_REG_SYSTICK_SYSTCSR_TICKINT_M;
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! @brief Disable the interrupt in the SYSTICK.
|
||
|
|
//!
|
||
|
|
//! This function disables the interupt in the systick timer.
|
||
|
|
//!
|
||
|
|
//! @return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
am_hal_systick_int_disable(void)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Disable the systick timer interrupt.
|
||
|
|
//
|
||
|
|
AM_REG(SYSTICK, SYSTCSR) &= ~AM_REG_SYSTICK_SYSTCSR_TICKINT_M;
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! @brief Reads the interrupt status.
|
||
|
|
//!
|
||
|
|
//! This function reads the interrupt status in the systick timer.
|
||
|
|
//!
|
||
|
|
//! @return the interrupt status.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
uint32_t
|
||
|
|
am_hal_systick_int_status_get(void)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Return the systick timer interrupt status.
|
||
|
|
//
|
||
|
|
return AM_REG(SYSTICK, SYSTCSR) & AM_REG_SYSTICK_SYSTCSR_COUNTFLAG_M;
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! @brief Reset the interrupt in the SYSTICK.
|
||
|
|
//!
|
||
|
|
//! This function resets the systick timer by clearing out the configuration
|
||
|
|
//! register.
|
||
|
|
//!
|
||
|
|
//! @return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
am_hal_systick_reset(void)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Reset the systick timer interrupt.
|
||
|
|
//
|
||
|
|
AM_REG(SYSTICK, SYSTCSR) = 0x0;
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! @brief Load the value into the SYSTICK.
|
||
|
|
//!
|
||
|
|
//! @param ui32LoadVal the desired load value for the systick. Maximum value is
|
||
|
|
//! 0x00FF.FFFF.
|
||
|
|
//!
|
||
|
|
//! This function loads the desired value into the systick timer.
|
||
|
|
//!
|
||
|
|
//! @return None.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
void
|
||
|
|
am_hal_systick_load(uint32_t ui32LoadVal)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// The proper SysTick initialization sequence is: (p 4-36 of the M4 UG).
|
||
|
|
// 1. Program reload value
|
||
|
|
// 2. Clear current value
|
||
|
|
// 3. Program CSR
|
||
|
|
// Write the given value to the reload register.
|
||
|
|
// Write the Current Value Register to clear it to 0.
|
||
|
|
//
|
||
|
|
AM_REG(SYSTICK, SYSTRVR) = ui32LoadVal;
|
||
|
|
AM_REG(SYSTICK, SYSTCVR) = 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! @brief Get the current count value in the SYSTICK.
|
||
|
|
//!
|
||
|
|
//! This function gets the current count value in the systick timer.
|
||
|
|
//!
|
||
|
|
//! @return Current count value.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
uint32_t
|
||
|
|
am_hal_systick_count(void)
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Return the current systick timer count value.
|
||
|
|
//
|
||
|
|
return AM_REG(SYSTICK, SYSTCVR);
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! @brief Wait the specified number of ticks.
|
||
|
|
//!
|
||
|
|
//! This function delays for the given number of SysTick ticks.
|
||
|
|
//!
|
||
|
|
//! @note If the SysTick timer is being used elsewhere, it will be corrupted
|
||
|
|
//! by calling this function.
|
||
|
|
//!
|
||
|
|
//! @return 0 if successful.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
uint32_t
|
||
|
|
am_hal_systick_wait_ticks(uint32_t ui32Ticks)
|
||
|
|
{
|
||
|
|
|
||
|
|
if ( ui32Ticks == 0 )
|
||
|
|
{
|
||
|
|
ui32Ticks++; // Make sure we get the COUNTFLAG
|
||
|
|
}
|
||
|
|
|
||
|
|
//
|
||
|
|
// The proper SysTick initialization sequence is: (p 4-36 of the M4 UG).
|
||
|
|
// 1. Program reload value
|
||
|
|
// 2. Clear current value
|
||
|
|
// 3. Program CSR
|
||
|
|
//
|
||
|
|
// Set the reload value to the required number of ticks.
|
||
|
|
//
|
||
|
|
AM_REG(SYSTICK, SYSTRVR) = ui32Ticks;
|
||
|
|
|
||
|
|
//
|
||
|
|
// Clear the current count.
|
||
|
|
//
|
||
|
|
AM_REG(SYSTICK, SYSTCVR) = 0x0;
|
||
|
|
|
||
|
|
//
|
||
|
|
// Set to use the processor clock, but don't cause an exception (we'll poll).
|
||
|
|
//
|
||
|
|
AM_REG(SYSTICK, SYSTCSR) = AM_REG_SYSTICK_SYSTCSR_ENABLE_M;
|
||
|
|
|
||
|
|
//
|
||
|
|
// Poll till done
|
||
|
|
//
|
||
|
|
while ( !(AM_REG(SYSTICK, SYSTCSR) & AM_REG_SYSTICK_SYSTCSR_COUNTFLAG_M) );
|
||
|
|
|
||
|
|
//
|
||
|
|
// And disable systick before exiting.
|
||
|
|
//
|
||
|
|
AM_REG(SYSTICK, SYSTCSR) = 0;
|
||
|
|
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
//! @brief Delay the specified number of microseconds.
|
||
|
|
//!
|
||
|
|
//! This function will use the SysTick timer to delay until the specified
|
||
|
|
//! number of microseconds have elapsed. It uses the processor clocks and
|
||
|
|
//! takes into account the current CORESEL setting.
|
||
|
|
//!
|
||
|
|
//! @note If the SysTick timer is being used elsewhere, it will be corrupted
|
||
|
|
//! by calling this function.
|
||
|
|
//!
|
||
|
|
//! @return Total number of SysTick ticks delayed.
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|
||
|
|
uint32_t
|
||
|
|
am_hal_systick_delay_us(uint32_t ui32NumUs)
|
||
|
|
{
|
||
|
|
uint32_t ui32nLoops, ui32Ticks, uRet;
|
||
|
|
uint32_t ui32ClkFreq, ui32TicksPerMHz;
|
||
|
|
uint32_t ui32CoreSel = AM_BFR(CLKGEN, CCTRL, CORESEL);
|
||
|
|
|
||
|
|
ui32nLoops = 0;
|
||
|
|
if ( (ui32CoreSel <= AM_HAL_CLKGEN_CORESEL_MAXDIV) && (ui32NumUs >= 2) )
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Determine clock freq, then whether we need more than 1 iteration.
|
||
|
|
//
|
||
|
|
ui32ClkFreq = AM_HAL_CLKGEN_FREQ_MAX_MHZ >> ui32CoreSel;
|
||
|
|
if ( ui32CoreSel > 1 )
|
||
|
|
{
|
||
|
|
ui32ClkFreq = AM_HAL_CLKGEN_FREQ_MAX_MHZ / (ui32CoreSel + 1);
|
||
|
|
}
|
||
|
|
|
||
|
|
ui32TicksPerMHz = SYSTICK_MAX_TICKS / ui32ClkFreq;
|
||
|
|
if ( ui32NumUs > ui32TicksPerMHz )
|
||
|
|
{
|
||
|
|
//
|
||
|
|
// Get number of required loops, as well as additional ticks.
|
||
|
|
//
|
||
|
|
ui32nLoops = ui32NumUs / ui32TicksPerMHz;
|
||
|
|
ui32NumUs = ui32NumUs % ui32TicksPerMHz;
|
||
|
|
}
|
||
|
|
|
||
|
|
//
|
||
|
|
// Compute the number of ticks required.
|
||
|
|
// Allow for about 2us of call overhead.
|
||
|
|
//
|
||
|
|
ui32Ticks = (ui32NumUs - 2) * ui32ClkFreq;
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
ui32Ticks = 1;
|
||
|
|
}
|
||
|
|
|
||
|
|
uRet = (ui32nLoops * SYSTICK_MAX_TICKS) + ui32Ticks;
|
||
|
|
while ( ui32nLoops )
|
||
|
|
{
|
||
|
|
am_hal_systick_wait_ticks(SYSTICK_MAX_TICKS);
|
||
|
|
ui32nLoops--;
|
||
|
|
}
|
||
|
|
am_hal_systick_wait_ticks(ui32Ticks);
|
||
|
|
|
||
|
|
return uRet;
|
||
|
|
}
|
||
|
|
|
||
|
|
//*****************************************************************************
|
||
|
|
//
|
||
|
|
// End Doxygen group.
|
||
|
|
//! @}
|
||
|
|
//
|
||
|
|
//*****************************************************************************
|