1096 lines
35 KiB
Plaintext
1096 lines
35 KiB
Plaintext
|
# *****************************************************************************
|
||
|
|
# *
|
||
|
|
# bsp_pins.src *
|
||
|
|
# *
|
||
|
|
# Ambiq Micro BSP pins definitions *
|
||
|
|
# *
|
||
|
|
# *****************************************************************************
|
||
|
|
|
||
|
|
# *****************************************************************************
|
||
|
|
#
|
||
|
|
# Copyright (c) 2020, Ambiq Micro
|
||
|
|
# All rights reserved.
|
||
|
|
#
|
||
|
|
# Redistribution and use in source and binary forms, with or without
|
||
|
|
# modification, are permitted provided that the following conditions are met:
|
||
|
|
#
|
||
|
|
# 1. Redistributions of source code must retain the above copyright notice,
|
||
|
|
# this list of conditions and the following disclaimer.
|
||
|
|
#
|
||
|
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||
|
|
# notice, this list of conditions and the following disclaimer in the
|
||
|
|
# documentation and/or other materials provided with the distribution.
|
||
|
|
#
|
||
|
|
# 3. Neither the name of the copyright holder nor the names of its
|
||
|
|
# contributors may be used to endorse or promote products derived from this
|
||
|
|
# software without specific prior written permission.
|
||
|
|
#
|
||
|
|
# Third party software included in this distribution is subject to the
|
||
|
|
# additional license terms as defined in the /docs/licenses directory.
|
||
|
|
#
|
||
|
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||
|
|
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||
|
|
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||
|
|
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
|
||
|
|
# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||
|
|
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||
|
|
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
||
|
|
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
||
|
|
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||
|
|
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||
|
|
# POSSIBILITY OF SUCH DAMAGE.
|
||
|
|
#
|
||
|
|
# This is part of revision 2.4.2 of the AmbiqSuite Development Package.
|
||
|
|
#
|
||
|
|
# *****************************************************************************
|
||
|
|
|
||
|
|
# *****************************************************************************
|
||
|
|
# *
|
||
|
|
# This file contains descriptors for the various BSP pin definitions. *
|
||
|
|
# After completing the pin descriptors, the file is processed by a *
|
||
|
|
# Python script to generate the appropriate C and header file. *
|
||
|
|
# *
|
||
|
|
# NOTEs: *
|
||
|
|
# - This file should contain NO TAB characters, only spaces. *
|
||
|
|
# - Indentation is required, but the amount of indentation is not critical, *
|
||
|
|
# only the consistency of indentation. *
|
||
|
|
# - Comment lines always begin with a '#' sign. *
|
||
|
|
# - Letter case of keywords (left side of equal) is not important. *
|
||
|
|
# Letter case of the value (right side of equal) is not important when *
|
||
|
|
# processing standard values (e.g. "lo2hi"). However, letter case is *
|
||
|
|
# maintained when used for creating defines. *
|
||
|
|
# *
|
||
|
|
# Top level keywords: *
|
||
|
|
# pinsrc_ver: The format version of this .src file. *
|
||
|
|
# pin: Attributes for describing each pin. See below for details. *
|
||
|
|
# *
|
||
|
|
# Version 0x0103 (Apollo3p) 'pin' keywords: *
|
||
|
|
# ----------------------------------------- *
|
||
|
|
# All of the Apollo3 (version 0x0003) keywords plus/except: *
|
||
|
|
# bIomMSPIn 1 (or IOM) if this pin is describing an IOM. *
|
||
|
|
# 0 (or MSPI) if MSPI. *
|
||
|
|
# IOMnum The IOM or MSPI number pertaining to the CE. *
|
||
|
|
# If bIomMSPIn == 1: 0-5 *
|
||
|
|
# If bIomMSPIn == 0: 0-2 *
|
||
|
|
# Note: CEnum and CEpol remain the same as version 1. *
|
||
|
|
# *
|
||
|
|
# Version 0x0003 (Apollo3) 'pin' keywords: *
|
||
|
|
# ---------------------------------------- *
|
||
|
|
# All of the following keywords should begin in column 4. *
|
||
|
|
# name The name to be used for the pin. This name will be used as a *
|
||
|
|
# base for generating defines. Each pin name must be unique. *
|
||
|
|
# desc Optional: A description, if provided, will appear in the *
|
||
|
|
# generated header file. *
|
||
|
|
# funcsel A value 0-7, or the equivalent AM_HAL_PIN_nn_xxxx macro. *
|
||
|
|
# The AM_HAL_PIN_nn_xxxx nomenclature is preferred. *
|
||
|
|
# pinnum The pin number for the pin being defined (0-49). *
|
||
|
|
# drvstrength One of: 2, 4, 8, or 12. If not provided, 2 is default. *
|
||
|
|
# GPOutcfg Typically used if the pin is being defined as GPIO (funcsel=3) *
|
||
|
|
# One of: disable, pushpull, opendrain, tristate. *
|
||
|
|
# Also acceptable is a value 0-3, or a macro. *
|
||
|
|
# GPinput Only used if the pin is being defined as GPIO (funcsel=3). *
|
||
|
|
# One of: true, false. *
|
||
|
|
# GPRdZero One of readpin, zero (or true or false). *
|
||
|
|
# intdir One of: none, lo2hi, hi2lo, either. *
|
||
|
|
# Note - does not enable any interrupt. Only configures the *
|
||
|
|
# direction for when it is enabled. *
|
||
|
|
# pullup One of: none, 1_5K, 6K, 12K, 24K, weak, pulldown. *
|
||
|
|
# 1_5K - 24K: valid on I2C pins. *
|
||
|
|
# weak: Valid for pullups on all other (non-I2C) pins. *
|
||
|
|
# pulldown: Valid for pin 20 only. *
|
||
|
|
# Also acceptable is a macro (e.g. AM_HAL_GPIO_PIN_PULLUP_1_5K). *
|
||
|
|
# PowerSw One of: VDD or VSS. *
|
||
|
|
# Also acceptable is a macro (e.g. AM_HAL_GPIO_PIN_POWERSW_VDD). *
|
||
|
|
# *
|
||
|
|
# The following 3 parameters are used when the pin is being defined as a *
|
||
|
|
# chip enable, i.e. for SPI or MSPI. *
|
||
|
|
# IOMnum The IOM number pertaining to the CE. 0-5 for SPI, 6 for MSPI. *
|
||
|
|
# Also acceptable is a macro (e.g. one defined in am_bsp.h). *
|
||
|
|
# CEnum A value from 0-3. *
|
||
|
|
# If a value 0-3, a macro is created of the form: *
|
||
|
|
# #define AM_BSP_<name>_CHNL <CEnum> *
|
||
|
|
# Also acceptable is a macro (e.g. one defined in am_bsp.h), *
|
||
|
|
# in this case no other macro is created. *
|
||
|
|
# CEpol Chip enable polarity, active low or active high. *
|
||
|
|
# One of: LOW (default) or HIGH. *
|
||
|
|
# *
|
||
|
|
# *****************************************************************************
|
||
|
|
|
||
|
|
# *****************************************************************************
|
||
|
|
# *
|
||
|
|
# The .src file version determines the appropriate pin template to be used *
|
||
|
|
# and thus is device dependent. *
|
||
|
|
# Apollo3 Blue Plus (Apollo3p): 0x8003. *
|
||
|
|
# *
|
||
|
|
# *****************************************************************************
|
||
|
|
pinsrc_ver = 0x0103
|
||
|
|
|
||
|
|
|
||
|
|
# *****************************************************************************
|
||
|
|
# LEDs and buttons
|
||
|
|
# *****************************************************************************
|
||
|
|
pin
|
||
|
|
name = BUTTON0
|
||
|
|
desc = Labeled BTN2 on the Apollo3 Blue Plus EVB.
|
||
|
|
pinnum = 16
|
||
|
|
func_sel = AM_HAL_PIN_16_GPIO
|
||
|
|
drvstrength = 2
|
||
|
|
GPinput = true
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = BUTTON1
|
||
|
|
desc = Labeled BTN3 on the Apollo3 Blue Plus EVB.
|
||
|
|
pinnum = 18
|
||
|
|
func_sel = AM_HAL_PIN_18_GPIO
|
||
|
|
drvstrength = 2
|
||
|
|
GPinput = true
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = BUTTON2
|
||
|
|
desc = Labeled BTN4 on the Apollo3 Blue Plus EVB.
|
||
|
|
pinnum = 19
|
||
|
|
func_sel = AM_HAL_PIN_19_GPIO
|
||
|
|
drvstrength = 2
|
||
|
|
GPinput = true
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = LED0
|
||
|
|
desc = The LED nearest the end of the board.
|
||
|
|
pinnum = 10
|
||
|
|
func_sel = AM_HAL_PIN_10_GPIO
|
||
|
|
drvstrength = 2
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = LED1
|
||
|
|
pinnum = 30
|
||
|
|
func_sel = AM_HAL_PIN_30_GPIO
|
||
|
|
drvstrength = 2
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = LED2
|
||
|
|
pinnum = 15
|
||
|
|
func_sel = AM_HAL_PIN_15_GPIO
|
||
|
|
drvstrength = 2
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = LED3
|
||
|
|
pinnum = 14
|
||
|
|
func_sel = AM_HAL_PIN_14_GPIO
|
||
|
|
drvstrength = 2
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = LED4
|
||
|
|
desc = The LED at the most interior location.
|
||
|
|
pinnum = 17
|
||
|
|
func_sel = AM_HAL_PIN_17_GPIO
|
||
|
|
drvstrength = 2
|
||
|
|
|
||
|
|
# *****************************************************************************
|
||
|
|
# COM UART pins (UART0).
|
||
|
|
# *****************************************************************************
|
||
|
|
pin
|
||
|
|
name = COM_UART_TX
|
||
|
|
desc = This pin is the COM_UART transmit pin.
|
||
|
|
pinnum = 22
|
||
|
|
func_sel = AM_HAL_PIN_22_UART0TX
|
||
|
|
drvstrength = 2
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = COM_UART_RX
|
||
|
|
desc = This pin is the COM_UART receive pin.
|
||
|
|
pinnum = 23
|
||
|
|
func_sel = AM_HAL_PIN_23_UART0RX
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = COM_UART_CTS
|
||
|
|
pinnum = 38
|
||
|
|
func_sel = AM_HAL_PIN_38_UA0CTS
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = COM_UART_RTS
|
||
|
|
pinnum = 37
|
||
|
|
func_sel = AM_HAL_PIN_37_UA0RTS
|
||
|
|
drvstrength = 2
|
||
|
|
|
||
|
|
# *****************************************************************************
|
||
|
|
# UART pins (UART1).
|
||
|
|
# *****************************************************************************
|
||
|
|
pin
|
||
|
|
name = UART_TX
|
||
|
|
desc = This pin is the COM_UART transmit pin.
|
||
|
|
pinnum = 35
|
||
|
|
func_sel = AM_HAL_PIN_35_UART1TX
|
||
|
|
drvstrength = 2
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = UART_RX
|
||
|
|
desc = This pin is the COM_UART receive pin.
|
||
|
|
pinnum = 36
|
||
|
|
func_sel = AM_HAL_PIN_36_UART1RX
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = UART_CTS
|
||
|
|
pinnum = 45
|
||
|
|
func_sel = AM_HAL_PIN_45_UA1CTS
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = UART_RTS
|
||
|
|
pinnum = 44
|
||
|
|
func_sel = AM_HAL_PIN_44_UA1RTS
|
||
|
|
drvstrength = 2
|
||
|
|
|
||
|
|
# *****************************************************************************
|
||
|
|
# IOM0 pins.
|
||
|
|
# *****************************************************************************
|
||
|
|
pin
|
||
|
|
name = IOM0_CS
|
||
|
|
desc = I/O Master 0 chip select.
|
||
|
|
pinnum = 11
|
||
|
|
func_sel = AM_HAL_PIN_11_NCE11
|
||
|
|
drvstrength = 12
|
||
|
|
intdir = lo2hi
|
||
|
|
GPOutcfg = pushpull
|
||
|
|
GPinput = false
|
||
|
|
bIomMSPIn = IOM
|
||
|
|
IOMnum = 0
|
||
|
|
CEnum = 0
|
||
|
|
CEpol = low
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = IOM0_CS3
|
||
|
|
desc = I/O Master 0 chip select.
|
||
|
|
pinnum = 15
|
||
|
|
func_sel = AM_HAL_PIN_15_NCE15
|
||
|
|
drvstrength = 12
|
||
|
|
intdir = lo2hi
|
||
|
|
GPOutcfg = pushpull
|
||
|
|
GPinput = false
|
||
|
|
bIomMSPIn = IOM
|
||
|
|
IOMnum = 0
|
||
|
|
CEnum = 3
|
||
|
|
CEpol = low
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = IOM0_MISO
|
||
|
|
desc = I/O Master 0 SPI MISO signal.
|
||
|
|
pinnum = 6
|
||
|
|
func_sel = AM_HAL_PIN_6_M0MISO
|
||
|
|
bIomMSPIn = IOM
|
||
|
|
IOMnum = 0
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = IOM0_MOSI
|
||
|
|
desc = I/O Master 0 SPI MOSI signal.
|
||
|
|
pinnum = 7
|
||
|
|
func_sel = AM_HAL_PIN_7_M0MOSI
|
||
|
|
drvstrength = 12
|
||
|
|
bIomMSPIn = IOM
|
||
|
|
IOMnum = 0
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = IOM0_SCK
|
||
|
|
desc = I/O Master 0 SPI SCK signal.
|
||
|
|
pinnum = 5
|
||
|
|
func_sel = AM_HAL_PIN_5_M0SCK
|
||
|
|
drvstrength = 12
|
||
|
|
bIomMSPIn = IOM
|
||
|
|
IOMnum = 0
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = IOM0_SCL
|
||
|
|
desc = I/O Master 0 I2C clock signal.
|
||
|
|
pinnum = 5
|
||
|
|
func_sel = AM_HAL_PIN_5_M0SCL
|
||
|
|
GPOutcfg = opendrain
|
||
|
|
drvstrength = 12
|
||
|
|
pullup = 1_5K
|
||
|
|
bIomMSPIn = IOM
|
||
|
|
IOMnum = 0
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = IOM0_SDA
|
||
|
|
desc = I/O Master 0 I2C data signal.
|
||
|
|
pinnum = 6
|
||
|
|
func_sel = AM_HAL_PIN_6_M0SDAWIR3
|
||
|
|
GPOutcfg = opendrain
|
||
|
|
drvstrength = 12
|
||
|
|
pullup = 1_5K
|
||
|
|
bIomMSPIn = IOM
|
||
|
|
IOMnum = 0
|
||
|
|
|
||
|
|
# *****************************************************************************
|
||
|
|
# IOM1 pins.
|
||
|
|
# *****************************************************************************
|
||
|
|
pin
|
||
|
|
name = IOM1_CS
|
||
|
|
desc = I/O Master 1 chip select.
|
||
|
|
pinnum = 34
|
||
|
|
func_sel = AM_HAL_PIN_34_NCE34
|
||
|
|
drvstrength = 12
|
||
|
|
intdir = lo2hi
|
||
|
|
GPOutcfg = pushpull
|
||
|
|
GPinput = false
|
||
|
|
bIomMSPIn = IOM
|
||
|
|
IOMnum = 1
|
||
|
|
CEnum = 2
|
||
|
|
CEpol = low
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = IOM1_MISO
|
||
|
|
desc = I/O Master 1 SPI MISO signal.
|
||
|
|
pinnum = 9
|
||
|
|
func_sel = AM_HAL_PIN_9_M1MISO
|
||
|
|
bIomMSPIn = IOM
|
||
|
|
IOMnum = 1
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = IOM1_MOSI
|
||
|
|
desc = I/O Master 1 SPI MOSI signal.
|
||
|
|
pinnum = 10
|
||
|
|
func_sel = AM_HAL_PIN_10_M1MOSI
|
||
|
|
drvstrength = 12
|
||
|
|
bIomMSPIn = IOM
|
||
|
|
IOMnum = 1
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = IOM1_SCK
|
||
|
|
desc = I/O Master 1 SPI SCK signal.
|
||
|
|
pinnum = 8
|
||
|
|
func_sel = AM_HAL_PIN_8_M1SCK
|
||
|
|
drvstrength = 12
|
||
|
|
bIomMSPIn = IOM
|
||
|
|
IOMnum = 1
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = IOM1_SCL
|
||
|
|
desc = I/O Master 1 I2C clock signal.
|
||
|
|
pinnum = 8
|
||
|
|
func_sel = AM_HAL_PIN_8_M1SCL
|
||
|
|
GPOutcfg = opendrain
|
||
|
|
drvstrength = 12
|
||
|
|
pullup = 1_5K
|
||
|
|
bIomMSPIn = IOM
|
||
|
|
IOMnum = 1
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = IOM1_SDA
|
||
|
|
desc = I/O Master 1 I2C data signal.
|
||
|
|
pinnum = 9
|
||
|
|
func_sel = AM_HAL_PIN_9_M1SDAWIR3
|
||
|
|
GPOutcfg = opendrain
|
||
|
|
drvstrength = 12
|
||
|
|
pullup = 1_5K
|
||
|
|
bIomMSPIn = IOM
|
||
|
|
IOMnum = 1
|
||
|
|
|
||
|
|
# *****************************************************************************
|
||
|
|
# IOM2 pins.
|
||
|
|
# *****************************************************************************
|
||
|
|
pin
|
||
|
|
name = IOM2_CS
|
||
|
|
desc = I/O Master 2 chip select.
|
||
|
|
pinnum = 15
|
||
|
|
func_sel = AM_HAL_PIN_15_NCE15
|
||
|
|
drvstrength = 12
|
||
|
|
intdir = lo2hi
|
||
|
|
GPOutcfg = pushpull
|
||
|
|
GPinput = false
|
||
|
|
bIomMSPIn = IOM
|
||
|
|
IOMnum = 2
|
||
|
|
CEnum = 3
|
||
|
|
CEpol = low
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = IOM2_MISO
|
||
|
|
desc = I/O Master 2 SPI MISO signal.
|
||
|
|
pinnum = 25
|
||
|
|
func_sel = AM_HAL_PIN_25_M2MISO
|
||
|
|
bIomMSPIn = IOM
|
||
|
|
IOMnum = 2
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = IOM2_MOSI
|
||
|
|
desc = I/O Master 2 SPI MOSI signal.
|
||
|
|
pinnum = 28
|
||
|
|
func_sel = AM_HAL_PIN_28_M2MOSI
|
||
|
|
drvstrength = 12
|
||
|
|
bIomMSPIn = IOM
|
||
|
|
IOMnum = 2
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = IOM2_SCK
|
||
|
|
desc = I/O Master 2 SPI SCK signal.
|
||
|
|
pinnum = 27
|
||
|
|
func_sel = AM_HAL_PIN_27_M2SCK
|
||
|
|
drvstrength = 12
|
||
|
|
bIomMSPIn = IOM
|
||
|
|
IOMnum = 2
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = IOM2_SCL
|
||
|
|
desc = I/O Master 2 I2C clock signal.
|
||
|
|
pinnum = 27
|
||
|
|
func_sel = AM_HAL_PIN_27_M2SCL
|
||
|
|
GPOutcfg = opendrain
|
||
|
|
drvstrength = 12
|
||
|
|
pullup = 1_5K
|
||
|
|
bIomMSPIn = IOM
|
||
|
|
IOMnum = 2
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = IOM2_SDA
|
||
|
|
desc = I/O Master 2 I2C data signal.
|
||
|
|
pinnum = 25
|
||
|
|
func_sel = AM_HAL_PIN_25_M2SDAWIR3
|
||
|
|
GPOutcfg = opendrain
|
||
|
|
drvstrength = 12
|
||
|
|
pullup = 1_5K
|
||
|
|
bIomMSPIn = IOM
|
||
|
|
IOMnum = 2
|
||
|
|
|
||
|
|
# *****************************************************************************
|
||
|
|
# IOM3 pins.
|
||
|
|
# *****************************************************************************
|
||
|
|
pin
|
||
|
|
name = IOM3_CS
|
||
|
|
desc = I/O Master 3 chip select.
|
||
|
|
pinnum = 29
|
||
|
|
func_sel = AM_HAL_PIN_29_NCE29
|
||
|
|
drvstrength = 12
|
||
|
|
intdir = lo2hi
|
||
|
|
GPOutcfg = pushpull
|
||
|
|
GPinput = false
|
||
|
|
bIomMSPIn = IOM
|
||
|
|
IOMnum = 3
|
||
|
|
CEnum = 0
|
||
|
|
CEpol = low
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = IOM3_MISO
|
||
|
|
desc = I/O Master 3 SPI MISO signal.
|
||
|
|
pinnum = 43
|
||
|
|
func_sel = AM_HAL_PIN_43_M3MISO
|
||
|
|
bIomMSPIn = IOM
|
||
|
|
IOMnum = 3
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = IOM3_MOSI
|
||
|
|
desc = I/O Master 3 SPI MOSI signal.
|
||
|
|
pinnum = 38
|
||
|
|
func_sel = AM_HAL_PIN_38_M3MOSI
|
||
|
|
drvstrength = 12
|
||
|
|
bIomMSPIn = IOM
|
||
|
|
IOMnum = 3
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = IOM3_SCK
|
||
|
|
desc = I/O Master 3 SPI SCK signal.
|
||
|
|
pinnum = 42
|
||
|
|
func_sel = AM_HAL_PIN_42_M3SCK
|
||
|
|
drvstrength = 12
|
||
|
|
bIomMSPIn = IOM
|
||
|
|
IOMnum = 3
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = IOM3_SCL
|
||
|
|
desc = I/O Master 3 I2C clock signal.
|
||
|
|
pinnum = 42
|
||
|
|
func_sel = AM_HAL_PIN_42_M3SCL
|
||
|
|
GPOutcfg = opendrain
|
||
|
|
drvstrength = 12
|
||
|
|
pullup = 1_5K
|
||
|
|
bIomMSPIn = IOM
|
||
|
|
IOMnum = 3
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = IOM3_SDA
|
||
|
|
desc = I/O Master 3 I2C data signal.
|
||
|
|
pinnum = 43
|
||
|
|
func_sel = AM_HAL_PIN_43_M3SDAWIR3
|
||
|
|
GPOutcfg = opendrain
|
||
|
|
drvstrength = 12
|
||
|
|
pullup = 1_5K
|
||
|
|
bIomMSPIn = IOM
|
||
|
|
IOMnum = 3
|
||
|
|
|
||
|
|
# *****************************************************************************
|
||
|
|
# IOM4 pins.
|
||
|
|
# *****************************************************************************
|
||
|
|
pin
|
||
|
|
name = IOM4_CS
|
||
|
|
desc = I/O Master 4 chip select.
|
||
|
|
pinnum = 13
|
||
|
|
func_sel = AM_HAL_PIN_13_NCE13
|
||
|
|
drvstrength = 12
|
||
|
|
intdir = lo2hi
|
||
|
|
GPOutcfg = pushpull
|
||
|
|
GPinput = false
|
||
|
|
bIomMSPIn = IOM
|
||
|
|
IOMnum = 4
|
||
|
|
CEnum = 1
|
||
|
|
CEpol = low
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = IOM4_MISO
|
||
|
|
desc = I/O Master 4 SPI MISO signal.
|
||
|
|
pinnum = 40
|
||
|
|
func_sel = AM_HAL_PIN_40_M4MISO
|
||
|
|
bIomMSPIn = IOM
|
||
|
|
IOMnum = 4
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = IOM4_MOSI
|
||
|
|
desc = I/O Master 4 SPI MOSI signal.
|
||
|
|
pinnum = 44
|
||
|
|
func_sel = AM_HAL_PIN_44_M4MOSI
|
||
|
|
drvstrength = 12
|
||
|
|
bIomMSPIn = IOM
|
||
|
|
IOMnum = 4
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = IOM4_SCK
|
||
|
|
desc = I/O Master 4 SPI SCK signal.
|
||
|
|
pinnum = 39
|
||
|
|
func_sel = AM_HAL_PIN_39_M4SCK
|
||
|
|
drvstrength = 12
|
||
|
|
bIomMSPIn = IOM
|
||
|
|
IOMnum = 4
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = IOM4_SCL
|
||
|
|
desc = I/O Master 4 I2C clock signal.
|
||
|
|
pinnum = 39
|
||
|
|
func_sel = AM_HAL_PIN_39_M4SCL
|
||
|
|
GPOutcfg = opendrain
|
||
|
|
drvstrength = 12
|
||
|
|
pullup = 1_5K
|
||
|
|
bIomMSPIn = IOM
|
||
|
|
IOMnum = 4
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = IOM4_SDA
|
||
|
|
desc = I/O Master 4 I2C data signal.
|
||
|
|
pinnum = 40
|
||
|
|
func_sel = AM_HAL_PIN_40_M4SDAWIR3
|
||
|
|
GPOutcfg = opendrain
|
||
|
|
drvstrength = 12
|
||
|
|
pullup = 1_5K
|
||
|
|
bIomMSPIn = IOM
|
||
|
|
IOMnum = 4
|
||
|
|
|
||
|
|
# *****************************************************************************
|
||
|
|
# IOM5 pins.
|
||
|
|
# *****************************************************************************
|
||
|
|
pin
|
||
|
|
name = IOM5_CS
|
||
|
|
desc = I/O Master 5 chip select.
|
||
|
|
pinnum = 16
|
||
|
|
func_sel = AM_HAL_PIN_16_NCE16
|
||
|
|
drvstrength = 12
|
||
|
|
intdir = lo2hi
|
||
|
|
GPOutcfg = pushpull
|
||
|
|
GPinput = false
|
||
|
|
bIomMSPIn = IOM
|
||
|
|
IOMnum = 5
|
||
|
|
CEnum = 0
|
||
|
|
CEpol = low
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = IOM5_MISO
|
||
|
|
desc = I/O Master 5 SPI MISO signal.
|
||
|
|
pinnum = 49
|
||
|
|
func_sel = AM_HAL_PIN_49_M5MISO
|
||
|
|
bIomMSPIn = IOM
|
||
|
|
IOMnum = 5
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = IOM5_MOSI
|
||
|
|
desc = I/O Master 5 SPI MOSI signal.
|
||
|
|
pinnum = 47
|
||
|
|
func_sel = AM_HAL_PIN_47_M5MOSI
|
||
|
|
drvstrength = 12
|
||
|
|
bIomMSPIn = IOM
|
||
|
|
IOMnum = 5
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = IOM5_SCK
|
||
|
|
desc = I/O Master 5 SPI SCK signal.
|
||
|
|
pinnum = 48
|
||
|
|
func_sel = AM_HAL_PIN_48_M5SCK
|
||
|
|
drvstrength = 12
|
||
|
|
bIomMSPIn = IOM
|
||
|
|
IOMnum = 5
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = IOM5_SCL
|
||
|
|
desc = I/O Master 5 I2C clock signal.
|
||
|
|
pinnum = 48
|
||
|
|
func_sel = AM_HAL_PIN_48_M5SCL
|
||
|
|
GPOutcfg = opendrain
|
||
|
|
drvstrength = 12
|
||
|
|
pullup = 1_5K
|
||
|
|
bIomMSPIn = IOM
|
||
|
|
IOMnum = 5
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = IOM5_SDA
|
||
|
|
desc = I/O Master 5 I2C data signal.
|
||
|
|
pinnum = 49
|
||
|
|
func_sel = AM_HAL_PIN_49_M5SDAWIR3
|
||
|
|
GPOutcfg = opendrain
|
||
|
|
drvstrength = 12
|
||
|
|
pullup = 1_5K
|
||
|
|
bIomMSPIn = IOM
|
||
|
|
IOMnum = 5
|
||
|
|
|
||
|
|
# *****************************************************************************
|
||
|
|
# MSPI0 pins.
|
||
|
|
# *****************************************************************************
|
||
|
|
pin
|
||
|
|
name = MSPI0_CE0
|
||
|
|
desc = MSPI0 chip select 0. Note: CE1 must be disabled or tristated when using this pin for CE.
|
||
|
|
pinnum = 37
|
||
|
|
func_sel = AM_HAL_PIN_37_NCE37
|
||
|
|
drvstrength = 12
|
||
|
|
intdir = lo2hi
|
||
|
|
GPOutcfg = pushpull
|
||
|
|
GPinput = false
|
||
|
|
bIomMSPIn = MSPI
|
||
|
|
MSPInum = 0
|
||
|
|
CEnum = 0
|
||
|
|
CEpol = low
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = MSPI0_CE1
|
||
|
|
desc = MSPI0 chip select 1. Note: CE0 must be disabled or tristated when using this pin for CE.
|
||
|
|
pinnum = 12
|
||
|
|
func_sel = AM_HAL_PIN_12_NCE12
|
||
|
|
drvstrength = 12
|
||
|
|
intdir = lo2hi
|
||
|
|
GPOutcfg = pushpull
|
||
|
|
GPinput = false
|
||
|
|
bIomMSPIn = MSPI
|
||
|
|
MSPInum = 0
|
||
|
|
CEnum = 0
|
||
|
|
CEpol = low
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = MSPI0_D0
|
||
|
|
desc = MSPI0 data 0.
|
||
|
|
pinnum = 22
|
||
|
|
func_sel = AM_HAL_PIN_22_MSPI0_0
|
||
|
|
drvstrength = 8
|
||
|
|
intdir = lo2hi
|
||
|
|
bIomMSPIn = MSPI
|
||
|
|
MSPInum = 0
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = MSPI0_D1
|
||
|
|
desc = MSPI0 data 1.
|
||
|
|
pinnum = 26
|
||
|
|
func_sel = AM_HAL_PIN_26_MSPI0_1
|
||
|
|
drvstrength = 8
|
||
|
|
intdir = lo2hi
|
||
|
|
bIomMSPIn = MSPI
|
||
|
|
MSPInum = 0
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = MSPI0_D2
|
||
|
|
desc = MSPI0 data 2.
|
||
|
|
pinnum = 4
|
||
|
|
func_sel = AM_HAL_PIN_4_MSPI0_2
|
||
|
|
drvstrength = 8
|
||
|
|
intdir = lo2hi
|
||
|
|
bIomMSPIn = MSPI
|
||
|
|
MSPInum = 0
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = MSPI0_D3
|
||
|
|
desc = MSPI0 data 3.
|
||
|
|
pinnum = 23
|
||
|
|
func_sel = AM_HAL_PIN_23_MSPI0_3
|
||
|
|
drvstrength = 8
|
||
|
|
intdir = lo2hi
|
||
|
|
bIomMSPIn = MSPI
|
||
|
|
MSPInum = 0
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = MSPI0_SCK
|
||
|
|
desc = MSPI0 clock.
|
||
|
|
pinnum = 24
|
||
|
|
func_sel = AM_HAL_PIN_24_MSPI0_8
|
||
|
|
drvstrength = 12
|
||
|
|
intdir = lo2hi
|
||
|
|
bIomMSPIn = MSPI
|
||
|
|
MSPInum = 0
|
||
|
|
|
||
|
|
# *****************************************************************************
|
||
|
|
# MSPI1 pins.
|
||
|
|
# *****************************************************************************
|
||
|
|
pin
|
||
|
|
name = MSPI1_CE0
|
||
|
|
desc = MSPI1 chip select 0. Note: CE1 must be disabled or tristated when using this pin for CE.
|
||
|
|
pinnum = 50
|
||
|
|
func_sel = AM_HAL_PIN_50_NCE50
|
||
|
|
drvstrength = 12
|
||
|
|
intdir = lo2hi
|
||
|
|
GPOutcfg = pushpull
|
||
|
|
GPinput = false
|
||
|
|
bIomMSPIn = MSPI
|
||
|
|
MSPInum = 1
|
||
|
|
CEnum = 0
|
||
|
|
CEpol = low
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = MSPI1_CE1
|
||
|
|
desc = MSPI1 chip select 1. Note: CE0 must be disabled or tristated when using this pin for CE.
|
||
|
|
pinnum = 62
|
||
|
|
func_sel = AM_HAL_PIN_62_NCE62
|
||
|
|
drvstrength = 12
|
||
|
|
intdir = lo2hi
|
||
|
|
GPOutcfg = pushpull
|
||
|
|
GPinput = false
|
||
|
|
bIomMSPIn = MSPI
|
||
|
|
MSPInum = 0
|
||
|
|
CEnum = 0
|
||
|
|
CEpol = low
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = MSPI1_D0
|
||
|
|
desc = MSPI1 data 0.
|
||
|
|
pinnum = 51
|
||
|
|
func_sel = AM_HAL_PIN_51_MSPI1_0
|
||
|
|
drvstrength = 8
|
||
|
|
intdir = lo2hi
|
||
|
|
bIomMSPIn = MSPI
|
||
|
|
MSPInum = 1
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = MSPI1_D1
|
||
|
|
desc = MSPI1 data 1.
|
||
|
|
pinnum = 52
|
||
|
|
func_sel = AM_HAL_PIN_52_MSPI1_1
|
||
|
|
drvstrength = 8
|
||
|
|
intdir = lo2hi
|
||
|
|
bIomMSPIn = MSPI
|
||
|
|
MSPInum = 1
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = MSPI1_D2
|
||
|
|
desc = MSPI1 data 2.
|
||
|
|
pinnum = 53
|
||
|
|
func_sel = AM_HAL_PIN_53_MSPI1_2
|
||
|
|
drvstrength = 8
|
||
|
|
intdir = lo2hi
|
||
|
|
bIomMSPIn = MSPI
|
||
|
|
MSPInum = 1
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = MSPI1_D3
|
||
|
|
desc = MSPI1 data 3.
|
||
|
|
pinnum = 54
|
||
|
|
func_sel = AM_HAL_PIN_54_MSPI1_3
|
||
|
|
drvstrength = 8
|
||
|
|
intdir = lo2hi
|
||
|
|
bIomMSPIn = MSPI
|
||
|
|
MSPInum = 1
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = MSPI1_D4
|
||
|
|
desc = MSPI1 data 4.
|
||
|
|
pinnum = 55
|
||
|
|
func_sel = AM_HAL_PIN_55_MSPI1_4
|
||
|
|
drvstrength = 8
|
||
|
|
intdir = lo2hi
|
||
|
|
bIomMSPIn = MSPI
|
||
|
|
MSPInum = 1
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = MSPI1_D5
|
||
|
|
desc = MSPI1 data 5.
|
||
|
|
pinnum = 56
|
||
|
|
func_sel = AM_HAL_PIN_56_MSPI1_5
|
||
|
|
drvstrength = 8
|
||
|
|
intdir = lo2hi
|
||
|
|
bIomMSPIn = MSPI
|
||
|
|
MSPInum = 1
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = MSPI1_D6
|
||
|
|
desc = MSPI1 data 6.
|
||
|
|
pinnum = 57
|
||
|
|
func_sel = AM_HAL_PIN_57_MSPI1_6
|
||
|
|
drvstrength = 8
|
||
|
|
intdir = lo2hi
|
||
|
|
bIomMSPIn = MSPI
|
||
|
|
MSPInum = 1
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = MSPI1_D7
|
||
|
|
desc = MSPI1 data 7.
|
||
|
|
pinnum = 58
|
||
|
|
func_sel = AM_HAL_PIN_58_MSPI1_7
|
||
|
|
drvstrength = 8
|
||
|
|
intdir = lo2hi
|
||
|
|
bIomMSPIn = MSPI
|
||
|
|
MSPInum = 1
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = MSPI1_SCK
|
||
|
|
desc = MSPI1 clock.
|
||
|
|
pinnum = 59
|
||
|
|
func_sel = AM_HAL_PIN_59_MSPI1_8
|
||
|
|
drvstrength = 12
|
||
|
|
intdir = lo2hi
|
||
|
|
bIomMSPIn = MSPI
|
||
|
|
MSPInum = 1
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = MSPI1_DMDQS
|
||
|
|
desc = MSPI1 DDR Data Strobe.
|
||
|
|
pinnum = 60
|
||
|
|
func_sel = AM_HAL_PIN_60_MSPI1_9
|
||
|
|
drvstrength = 12
|
||
|
|
intdir = lo2hi
|
||
|
|
bIomMSPIn = MSPI
|
||
|
|
MSPInum = 1
|
||
|
|
|
||
|
|
# *****************************************************************************
|
||
|
|
# MSPI2 pins.
|
||
|
|
# *****************************************************************************
|
||
|
|
pin
|
||
|
|
name = MSPI2_CE0
|
||
|
|
desc = MSPI2 chip select 0. Note: CE2 must be disabled or tristated when using this pin for CE.
|
||
|
|
pinnum = 63
|
||
|
|
func_sel = AM_HAL_PIN_63_NCE63
|
||
|
|
drvstrength = 12
|
||
|
|
intdir = lo2hi
|
||
|
|
GPOutcfg = pushpull
|
||
|
|
GPinput = false
|
||
|
|
bIomMSPIn = MSPI
|
||
|
|
MSPInum = 2
|
||
|
|
CEnum = 0
|
||
|
|
CEpol = low
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = MSPI2_CE1
|
||
|
|
desc = MSPI2 chip select 1. Note: CE0 must be disabled or tristated when using this pin for CE.
|
||
|
|
pinnum = 61
|
||
|
|
func_sel = AM_HAL_PIN_61_NCE61
|
||
|
|
drvstrength = 12
|
||
|
|
intdir = lo2hi
|
||
|
|
GPOutcfg = pushpull
|
||
|
|
GPinput = false
|
||
|
|
bIomMSPIn = MSPI
|
||
|
|
MSPInum = 0
|
||
|
|
CEnum = 0
|
||
|
|
CEpol = low
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = MSPI2_D0
|
||
|
|
desc = MSPI2 data 0.
|
||
|
|
pinnum = 64
|
||
|
|
func_sel = AM_HAL_PIN_64_MSPI2_0
|
||
|
|
drvstrength = 8
|
||
|
|
intdir = lo2hi
|
||
|
|
bIomMSPIn = MSPI
|
||
|
|
MSPInum = 2
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = MSPI2_D1
|
||
|
|
desc = MSPI2 data 1.
|
||
|
|
pinnum = 65
|
||
|
|
func_sel = AM_HAL_PIN_65_MSPI2_1
|
||
|
|
drvstrength = 8
|
||
|
|
intdir = lo2hi
|
||
|
|
bIomMSPIn = MSPI
|
||
|
|
MSPInum = 2
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = MSPI2_D2
|
||
|
|
desc = MSPI2 data 2.
|
||
|
|
pinnum = 66
|
||
|
|
func_sel = AM_HAL_PIN_66_MSPI2_2
|
||
|
|
drvstrength = 8
|
||
|
|
intdir = lo2hi
|
||
|
|
bIomMSPIn = MSPI
|
||
|
|
MSPInum = 2
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = MSPI2_D3
|
||
|
|
desc = MSPI2 data 3.
|
||
|
|
pinnum = 67
|
||
|
|
func_sel = AM_HAL_PIN_67_MSPI2_3
|
||
|
|
drvstrength = 8
|
||
|
|
intdir = lo2hi
|
||
|
|
bIomMSPIn = MSPI
|
||
|
|
MSPInum = 2
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = MSPI2_SCK
|
||
|
|
desc = MSPI2 clock.
|
||
|
|
pinnum = 68
|
||
|
|
func_sel = AM_HAL_PIN_68_MSPI2_4
|
||
|
|
drvstrength = 8
|
||
|
|
intdir = lo2hi
|
||
|
|
bIomMSPIn = MSPI
|
||
|
|
MSPInum = 2
|
||
|
|
|
||
|
|
# *****************************************************************************
|
||
|
|
# Display pins.
|
||
|
|
# *****************************************************************************
|
||
|
|
pin
|
||
|
|
name = DISPLAY_TE
|
||
|
|
desc = Display TE signal.
|
||
|
|
pinnum = 72
|
||
|
|
func_sel = AM_HAL_PIN_72_GPIO
|
||
|
|
drvstrength = 2
|
||
|
|
intdir = lo2hi
|
||
|
|
GPinput = true
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = DISPLAY_RESET
|
||
|
|
desc = Display reset control.
|
||
|
|
pinnum = 73
|
||
|
|
func_sel = AM_HAL_PIN_73_GPIO
|
||
|
|
drvstrength = 2
|
||
|
|
GPOutcfg = pushpull
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
# *****************************************************************************
|
||
|
|
# IOS pins.
|
||
|
|
# *****************************************************************************
|
||
|
|
pin
|
||
|
|
name = IOS_CE
|
||
|
|
desc = I/O Slave chip select.
|
||
|
|
pinnum = 3
|
||
|
|
func_sel = AM_HAL_PIN_3_SLnCE
|
||
|
|
drvstrength = 12
|
||
|
|
GPinput = true
|
||
|
|
CEnum = 0
|
||
|
|
CEpol = low
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = IOS_MISO
|
||
|
|
desc = I/O Slave SPI MISO signal.
|
||
|
|
pinnum = 2
|
||
|
|
func_sel = AM_HAL_PIN_2_SLMISO
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = IOS_MOSI
|
||
|
|
desc = I/O Slave SPI MOSI signal.
|
||
|
|
pinnum = 1
|
||
|
|
func_sel = AM_HAL_PIN_1_SLMOSI
|
||
|
|
drvstrength = 12
|
||
|
|
GPinput = true
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = IOS_SCK
|
||
|
|
desc = I/O Slave SPI SCK signal.
|
||
|
|
pinnum = 0
|
||
|
|
func_sel = AM_HAL_PIN_0_SLSCK
|
||
|
|
drvstrength = 12
|
||
|
|
GPinput = true
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = IOS_SCL
|
||
|
|
desc = I/O Slave I2C clock signal.
|
||
|
|
pinnum = 0
|
||
|
|
func_sel = AM_HAL_PIN_0_SLSCL
|
||
|
|
drvstrength = 12
|
||
|
|
GPinput = true
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = IOS_SDA
|
||
|
|
desc = I/O Slave I2C data signal.
|
||
|
|
pinnum = 1
|
||
|
|
func_sel = AM_HAL_PIN_1_SLSDAWIR3
|
||
|
|
GPOutcfg = opendrain
|
||
|
|
drvstrength = 12
|
||
|
|
pullup = 1_5K
|
||
|
|
|
||
|
|
# *****************************************************************************
|
||
|
|
# PDM pins.
|
||
|
|
# *****************************************************************************
|
||
|
|
pin
|
||
|
|
name = PDMCLK
|
||
|
|
desc = PDM CLK.
|
||
|
|
pinnum = 12
|
||
|
|
func_sel = AM_HAL_PIN_12_PDMCLK
|
||
|
|
drvstrength = 2
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = PDM_DATA
|
||
|
|
desc = PDM DATA.
|
||
|
|
pinnum = 11
|
||
|
|
func_sel = AM_HAL_PIN_11_PDMDATA
|
||
|
|
drvstrength = 2
|
||
|
|
|
||
|
|
# *****************************************************************************
|
||
|
|
# SCARD pins.
|
||
|
|
# *****************************************************************************
|
||
|
|
pin
|
||
|
|
name = SCARD_SCCCLK
|
||
|
|
desc = SCARD SCCCLK.
|
||
|
|
pinnum = 8
|
||
|
|
func_sel = AM_HAL_PIN_8_SCCCLK
|
||
|
|
drvstrength = 12
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = SCARD_SCCIO
|
||
|
|
desc = Fireball device test board chip select.
|
||
|
|
pinnum = 9
|
||
|
|
func_sel = AM_HAL_PIN_9_SCCIO
|
||
|
|
drvstrength = 2
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = SCARD_SCCRST
|
||
|
|
desc = SCARD SCCRST.
|
||
|
|
pinnum = 46
|
||
|
|
func_sel = AM_HAL_PIN_46_SCCRST
|
||
|
|
drvstrength = 2
|
||
|
|
|
||
|
|
# *****************************************************************************
|
||
|
|
# ITM pins.
|
||
|
|
# *****************************************************************************
|
||
|
|
pin
|
||
|
|
name = ITM_SWO
|
||
|
|
desc = ITM Serial Wire Output.
|
||
|
|
pinnum = 41
|
||
|
|
func_sel = AM_HAL_PIN_41_SWO
|
||
|
|
drvstrength = 2
|
||
|
|
|
||
|
|
# *****************************************************************************
|
||
|
|
# CORE pins.
|
||
|
|
# *****************************************************************************
|
||
|
|
pin
|
||
|
|
name = SWDCK
|
||
|
|
desc = Cortex Serial Wire DCK.
|
||
|
|
pinnum = 20
|
||
|
|
func_sel = AM_HAL_PIN_20_SWDCK
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = SWDIO
|
||
|
|
desc = Cortex Serial Wire DIO.
|
||
|
|
pinnum = 21
|
||
|
|
func_sel = AM_HAL_PIN_21_SWDIO
|
||
|
|
|
||
|
|
# *****************************************************************************
|
||
|
|
# FIREBALL pins.
|
||
|
|
# *****************************************************************************
|
||
|
|
|
||
|
|
pin
|
||
|
|
name = FIREBALL_CE
|
||
|
|
desc = Fireball device test board chip select.
|
||
|
|
pinnum = 30
|
||
|
|
func_sel = AM_HAL_PIN_30_NCE30
|
||
|
|
drvstrength = 12
|
||
|
|
intdir = lo2hi
|
||
|
|
GPOutcfg = pushpull
|
||
|
|
GPinput = false
|
||
|
|
bIomMSPIn = IOM
|
||
|
|
IOMnum = 5
|
||
|
|
CEnum = 3
|
||
|
|
CEpol = low
|