vos/ambiq-hal-sys/ambiq-sparkfun-sdk/mcu/apollo/hal/am_hal_flash.h

185 lines
7.7 KiB
C
Raw Permalink Normal View History

2022-10-24 06:45:43 +00:00
//*****************************************************************************
//
// am_hal_flash.h
//! @file
//!
//! @brief Functions for performing Flash operations.
//!
//! @addtogroup flash1 Flash
//! @ingroup apollo1hal
//! @{
//
//*****************************************************************************
//*****************************************************************************
//
// Copyright (c) 2020, Ambiq Micro
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are met:
//
// 1. Redistributions of source code must retain the above copyright notice,
// this list of conditions and the following disclaimer.
//
// 2. Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
//
// 3. Neither the name of the copyright holder nor the names of its
// contributors may be used to endorse or promote products derived from this
// software without specific prior written permission.
//
// Third party software included in this distribution is subject to the
// additional license terms as defined in the /docs/licenses directory.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
// POSSIBILITY OF SUCH DAMAGE.
//
// This is part of revision 2.4.2 of the AmbiqSuite Development Package.
//
//*****************************************************************************
#ifndef AM_HAL_FLASH_H
#define AM_HAL_FLASH_H
#include <stdint.h>
#include <stdbool.h>
//*****************************************************************************
//
// Flash Program keys.
//
//*****************************************************************************
#define AM_HAL_FLASH_PROGRAM_KEY 0x12344321
#define AM_HAL_FLASH_OTP_KEY 0x87655678
//*****************************************************************************
//
// Some helpful flash values and macros.
//
//*****************************************************************************
#define AM_HAL_FLASH_ADDR 0x00000000
#define AM_HAL_FLASH_PAGE_SIZE ( 2 * 1024 )
#define AM_HAL_FLASH_INFO_SIZE AM_HAL_FLASH_PAGE_SIZE
#define AM_HAL_FLASH_BLOCK_SIZE ( 256 * 1024 )
#define AM_HAL_FLASH_BLOCK_PAGES ( AM_HAL_FLASH_BLOCK_SIZE / AM_HAL_FLASH_PAGE_SIZE )
#define AM_HAL_FLASH_INSTANCE_SIZE AM_HAL_FLASH_BLOCK_SIZE
#define AM_HAL_FLASH_INSTANCE_PAGES AM_HAL_FLASH_BLOCK_PAGES
#define AM_HAL_FLASH_TOTAL_SIZE ( AM_HAL_FLASH_BLOCK_SIZE * 2 )
#define AM_HAL_FLASH_LARGEST_VALID_ADDR ( AM_HAL_FLASH_ADDR + AM_HAL_FLASH_TOTAL_SIZE - 1 )
//
// Convert an absolute flash address to a block (instance)
//
#define AM_HAL_FLASH_ADDR2BLOCK(addr) ( ( addr >> 18 ) & 1 )
#define AM_HAL_FLASH_ADDR2INST(addr) ( ( addr >> 18 ) & 1 )
//
// Convert an absolute flash address to a page number relative to the block
//
#define AM_HAL_FLASH_ADDR2PAGE(addr) ( ( addr >> 11 ) & 0x7F )
//
// Convert an absolute flash address to an absolute page number
//
#define AM_HAL_FLASH_ADDR2ABSPAGE(addr) ( addr >> 11 )
//*****************************************************************************
//
// Given an integer number of microseconds, convert to a value representing the
// number of am_hal_flash_delay() cycles that will provide that amount of delay.
// This macro is designed to take into account some of the call overhead.
//
// e.g. To provide a 2us delay:
// am_hal_flash_delay( FLASH_CYCLES_US(2) );
//
// IMPORTANT - Apollo is spec'ed to run at multiple frequencies from 24MHz down
// to 3MHz. The macro must be able to handle any frequency and must be
// determined at runtime. Because 3MHz is a valid frequency, the macro cannot
// account for any overhead.
// For best results, when 24MHz operation is known use FLASH_CYCLES_US_MAX().
//
//*****************************************************************************
#define FLASH_CYCLES_US_MAX(n) ((n * (AM_HAL_CLKGEN_FREQ_MAX_MHZ / 3)) - 4)
#define FLASH_CYCLES_US(n) ((n * ((am_hal_clkgen_sysclk_get() / 1000000) / 3)) - 0)
//*****************************************************************************
//
// Structure of function pointers to helper functions for invoking various
// flash operations.
//
//*****************************************************************************
typedef struct am_hal_flash_helper_struct
{
int (*am_hal_flash_mass_erase)(uint32_t, uint32_t);
int (*am_hal_flash_page_erase)(uint32_t, uint32_t, uint32_t);
int (*am_hal_flash_program_main)(uint32_t, const uint32_t *,
uint32_t*, uint32_t);
int (*am_hal_flash_program_otp)(uint32_t, uint32_t,
const uint32_t*, uint32_t, uint32_t);
void (*am_hal_flash_program_main_sram)(void);
void (*am_hal_flash_program_otp_sram)(void);
void (*am_hal_flash_erase_main_pages_sram)(void);
void (*am_hal_flash_mass_erase_sram)(void);
} g_am_hal_flash_t;
extern const g_am_hal_flash_t g_am_hal_flash;
#ifdef __cplusplus
extern "C"
{
#endif
//*****************************************************************************
//
// Function prototypes for the helper functions
//
//*****************************************************************************
extern void am_hal_flash_delay(uint32_t ui32Iterations);
extern uint32_t am_hal_flash_delay_status_change(uint32_t ui32usDelay,
uint32_t ui32Address,
uint32_t ui32Mask,
uint32_t ui32Value);
extern int am_hal_flash_mass_erase(uint32_t ui32Value,
uint32_t ui32FlashBlk);
extern int am_hal_flash_page_erase(uint32_t ui32Value,
uint32_t ui32FlashBlk,
uint32_t ui32PageNum);
extern int am_hal_flash_program_otp(uint32_t ui32Value,
uint32_t ui32FlashBlk,
const uint32_t *pui32Src,
uint32_t ui32Offset,
uint32_t ui32NumWords);
extern int am_hal_flash_program_main(uint32_t value, const uint32_t *pSrc,
uint32_t *pDst, uint32_t NumberOfWords);
// SRAM variants
extern void am_hal_flash_erase_main_pages_sram(void);
extern void am_hal_flash_mass_erase_sram(void);
extern void am_hal_flash_program_otp_sram(void);
extern void am_hal_flash_program_main_sram(void);
// SRAM resident reader function for OTP can't be in FLASH
uint32_t am_hal_flash_load_ui32(uint32_t ui32Address);
#ifdef __cplusplus
}
#endif
#endif // AM_HAL_FLASH_H
//*****************************************************************************
//
// End Doxygen group.
//! @}
//
//*****************************************************************************