vance/vos
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
dev
vos/ambiq-hal-sys/ambiq-sparkfun-sdk/boards_sfe/redboard_artemis/bsp/bsp_pins.src

664 lines
21 KiB
Plaintext
Raw Permalink Normal View History

initial commit
2022-10-24 06:45:43 +00:00
# ******************************************************************************
# *
# Copyright (c) 2018 Ambiq Micro. *
# *
#*******************************************************************************
# *
# File: bsp_pins.src *
# *
# Title: SparkFun Edge Board Pin Definitions *
# *
# Date: 06/14/2019 *
# *
#*******************************************************************************
# *
# This file contains descriptors for the various BSP pin definitions. *
# After completing the pin descriptors, the file is processed by a *
# Python script to generate the appropriate C and header file. *
# *
# NOTEs: *
# - This file should contain NO TAB characters, only spaces. *
# - Indentation is required, but the amount of indentation is not critical, *
# only the consistency of indentation. *
# - Comment lines always begin with a '#' sign. *
# - Letter case of keywords (left side of equal) is not important. *
# Letter case of the value (right side of equal) is not important when *
# processing standard values (e.g. "lo2hi"). However, letter case is *
# maintained when used for creating defines. *
# *
# Keywords: *
# All of the following keywords should begin in column 4. *
# name The name to be used for the pin. This name will be used as a *
# base for generating defines. Each pin name must be unique. *
# desc Optional: A description, if provided, will appear in the *
# generated header file. *
# funcsel A value 0-7, or the equivalent AM_HAL_PIN_nn_xxxx macro. *
# The AM_HAL_PIN_nn_xxxx nomenclature is preferred. *
# pinnum The pin number for the pin being defined (0-49). *
# drvstrength One of: 2, 4, 8, or 12. If not provided, 2 is default. *
# GPOutcfg Typically used if the pin is being defined as GPIO (funcsel=3).*
# One of: disable, pushpull, opendrain, tristate. *
# Also acceptable is a value 0-3, or a macro. *
# GPinput Only used if the pin is being defined as GPIO (funcsel=3). *
# One of: true, false. *
# GPRdZero One of readpin, zero (or true or false). *
# intdir One of: none, lo2hi, hi2lo, either. *
# Note - does not enable any interrupt. Only configures the *
# direction for when it is enabled. *
# pullup One of: none, 1_5K, 6K, 12K, 24K, weak, pulldown. *
# 1_5K - 24K: valid on I2C pins. *
# weak: Valid for pullups on all other (non-I2C) pins. *
# pulldown: Valid for pin 20 only. *
# Also acceptable is a macro (e.g. AM_HAL_GPIO_PIN_PULLUP_1_5K). *
# PowerSw One of: VDD or VSS. *
# Also acceptable is a macro (e.g. AM_HAL_GPIO_PIN_POWERSW_VDD). *
# *
# The following 3 parameters are used when the pin is being defined as a *
# chip enable, i.e. for SPI or MSPI. *
# IOMnum The IOM number pertaining to the CE. 0-5 for SPI, 6 for MSPI. *
# Also acceptable is a macro (e.g. one defined in am_bsp.h). *
# CEnum A value from 0-3. *
# If a value 0-3, a macro is created of the form: *
# #define AM_BSP_<name>_CHNL <CEnum> *
# Also acceptable is a macro (e.g. one defined in am_bsp.h), *
# in this case no other macro is created. *
# CEpol Chip enable polarity, active low or active high. *
# One of: LOW (default) or HIGH. *
# *
# ******************************************************************************
# *****************************************************************************
# LEDs and buttons
# *****************************************************************************
pin
name = LED_BLUE
desc = The BLUE LED labelled 13
pinnum = 5
func_sel = AM_HAL_PIN_5_GPIO
drvstrength = 12
# *****************************************************************************
# PDM Microphone Lines
# *****************************************************************************
pin
name = MIC_DATA
desc = Data line for PDM microphones
pinnum = 36
func_sel = AM_HAL_PIN_36_PDMDATA
pin
name = MIC_CLK
desc = Clock line for PDM microphones
pinnum = 37
func_sel = AM_HAL_PIN_37_PDMCLK
# *****************************************************************************
# COM UART pins (UART0).
# *****************************************************************************
pin
name = COM_UART_TX
desc = This pin is the COM_UART transmit pin.
pinnum = 48
func_sel = AM_HAL_PIN_48_UART0TX
drvstrength = 2
pin
name = COM_UART_RX
desc = This pin is the COM_UART receive pin.
pinnum = 49
func_sel = AM_HAL_PIN_49_UART0RX
# *****************************************************************************
# IOM0 pins.
# *****************************************************************************
pin
name = IOM0_CS
desc = I/O Master 0 chip select.
pinnum = 11
func_sel = AM_HAL_PIN_11_NCE11
drvstrength = 12
intdir = lo2hi
GPOutcfg = pushpull
GPinput = false
IOMnum = 0
CEnum = 0
CEpol = low
pin
name = IOM0_CS3
desc = I/O Master 0 chip select.
pinnum = 15
func_sel = AM_HAL_PIN_15_NCE15
drvstrength = 12
intdir = lo2hi
GPOutcfg = pushpull
GPinput = false
IOMnum = 0
CEnum = 3
CEpol = low
pin
name = IOM0_MISO
desc = I/O Master 0 SPI MISO signal.
pinnum = 6
func_sel = AM_HAL_PIN_6_M0MISO
IOMnum = 0
pin
name = IOM0_MOSI
desc = I/O Master 0 SPI MOSI signal.
pinnum = 7
func_sel = AM_HAL_PIN_7_M0MOSI
drvstrength = 12
IOMnum = 0
pin
name = IOM0_SCK
desc = I/O Master 0 SPI SCK signal.
pinnum = 5
func_sel = AM_HAL_PIN_5_M0SCK
drvstrength = 12
IOMnum = 0
pin
name = IOM0_SCL
desc = I/O Master 0 I2C clock signal.
pinnum = 5
func_sel = AM_HAL_PIN_5_M0SCL
GPOutcfg = opendrain
drvstrength = 12
pullup = 1_5K
IOMnum = 0
pin
name = IOM0_SDA
desc = I/O Master 0 I2C data signal.
pinnum = 6
func_sel = AM_HAL_PIN_6_M0SDAWIR3
GPOutcfg = opendrain
drvstrength = 12
pullup = 1_5K
IOMnum = 0
# *****************************************************************************
# IOM1 pins.
# *****************************************************************************
pin
name = IOM1_CS
desc = I/O Master 1 chip select.
pinnum = 14
func_sel = AM_HAL_PIN_14_NCE14
drvstrength = 12
intdir = lo2hi
GPOutcfg = pushpull
GPinput = false
IOMnum = 1
CEnum = 2
CEpol = low
pin
name = IOM1_MISO
desc = I/O Master 1 SPI MISO signal.
pinnum = 9
func_sel = AM_HAL_PIN_9_M1MISO
IOMnum = 1
pin
name = IOM1_MOSI
desc = I/O Master 1 SPI MOSI signal.
pinnum = 10
func_sel = AM_HAL_PIN_10_M1MOSI
drvstrength = 12
IOMnum = 1
pin
name = IOM1_SCK
desc = I/O Master 1 SPI SCK signal.
pinnum = 8
func_sel = AM_HAL_PIN_8_M1SCK
drvstrength = 12
IOMnum = 1
pin
name = IOM1_SCL
desc = I/O Master 1 I2C clock signal.
pinnum = 8
func_sel = AM_HAL_PIN_8_M1SCL
GPOutcfg = opendrain
drvstrength = 12
pullup = 1_5K
IOMnum = 1
pin
name = IOM1_SDA
desc = I/O Master 1 I2C data signal.
pinnum = 9
func_sel = AM_HAL_PIN_9_M1SDAWIR3
GPOutcfg = opendrain
drvstrength = 12
pullup = 1_5K
IOMnum = 1
# *****************************************************************************
# IOM2 pins.
# *****************************************************************************
pin
name = IOM2_CS
desc = I/O Master 2 chip select.
pinnum = 15
func_sel = AM_HAL_PIN_15_NCE15
drvstrength = 12
intdir = lo2hi
GPOutcfg = pushpull
GPinput = false
IOMnum = 2
CEnum = 3
CEpol = low
pin
name = IOM2_MISO
desc = I/O Master 2 SPI MISO signal.
pinnum = 25
func_sel = AM_HAL_PIN_25_M2MISO
IOMnum = 2
pin
name = IOM2_MOSI
desc = I/O Master 2 SPI MOSI signal.
pinnum = 28
func_sel = AM_HAL_PIN_28_M2MOSI
drvstrength = 12
IOMnum = 2
pin
name = IOM2_SCK
desc = I/O Master 2 SPI SCK signal.
pinnum = 27
func_sel = AM_HAL_PIN_27_M2SCK
drvstrength = 12
IOMnum = 2
pin
name = IOM2_SCL
desc = I/O Master 2 I2C clock signal.
pinnum = 27
func_sel = AM_HAL_PIN_27_M2SCL
GPOutcfg = opendrain
drvstrength = 12
pullup = 1_5K
IOMnum = 2
pin
name = IOM2_SDA
desc = I/O Master 2 I2C data signal.
pinnum = 25
func_sel = AM_HAL_PIN_25_M2SDAWIR3
GPOutcfg = opendrain
drvstrength = 12
pullup = 1_5K
IOMnum = 2
# *****************************************************************************
# IOM3 pins.
# *****************************************************************************
pin
name = IOM3_CS
desc = I/O Master 3 chip select.
pinnum = 12
func_sel = AM_HAL_PIN_12_NCE12
drvstrength = 12
intdir = lo2hi
GPOutcfg = pushpull
GPinput = false
IOMnum = 3
CEnum = 0
CEpol = low
pin
name = IOM3_MISO
desc = I/O Master 3 SPI MISO signal.
pinnum = 43
func_sel = AM_HAL_PIN_43_M3MISO
IOMnum = 3
pin
name = IOM3_MOSI
desc = I/O Master 3 SPI MOSI signal.
pinnum = 38
func_sel = AM_HAL_PIN_38_M3MOSI
drvstrength = 12
IOMnum = 3
pin
name = IOM3_SCK
desc = I/O Master 3 SPI SCK signal.
pinnum = 42
func_sel = AM_HAL_PIN_42_M3SCK
drvstrength = 12
IOMnum = 3
pin
name = IOM3_SCL
desc = I/O Master 3 I2C clock signal.
pinnum = 42
func_sel = AM_HAL_PIN_42_M3SCL
GPOutcfg = opendrain
drvstrength = 12
pullup = 1_5K
IOMnum = 3
pin
name = IOM3_SDA
desc = I/O Master 3 I2C data signal.
pinnum = 43
func_sel = AM_HAL_PIN_43_M3SDAWIR3
GPOutcfg = opendrain
drvstrength = 12
pullup = 1_5K
IOMnum = 3
# *****************************************************************************
# IOM4 pins.
# *****************************************************************************
pin
name = IOM4_CS
desc = I/O Master 4 chip select.
pinnum = 13
func_sel = AM_HAL_PIN_13_NCE13
drvstrength = 12
intdir = lo2hi
GPOutcfg = pushpull
GPinput = false
IOMnum = 4
CEnum = 1
CEpol = low
pin
name = IOM4_MISO
desc = I/O Master 4 SPI MISO signal.
pinnum = 40
func_sel = AM_HAL_PIN_40_M4MISO
IOMnum = 4
pin
name = IOM4_MOSI
desc = I/O Master 4 SPI MOSI signal.
pinnum = 44
func_sel = AM_HAL_PIN_44_M4MOSI
drvstrength = 12
IOMnum = 4
pin
name = IOM4_SCK
desc = I/O Master 4 SPI SCK signal.
pinnum = 39
func_sel = AM_HAL_PIN_39_M4SCK
drvstrength = 12
IOMnum = 4
pin
name = IOM4_SCL
desc = I/O Master 4 I2C clock signal.
pinnum = 39
func_sel = AM_HAL_PIN_39_M4SCL
GPOutcfg = opendrain
drvstrength = 12
pullup = 1_5K
IOMnum = 4
pin
name = IOM4_SDA
desc = I/O Master 4 I2C data signal.
pinnum = 40
func_sel = AM_HAL_PIN_40_M4SDAWIR3
GPOutcfg = opendrain
drvstrength = 12
pullup = 1_5K
IOMnum = 4
# *****************************************************************************
# IOM5 pins.
# *****************************************************************************
pin
name = IOM5_CS
desc = I/O Master 5 chip select.
pinnum = 16
func_sel = AM_HAL_PIN_16_NCE16
drvstrength = 12
intdir = lo2hi
GPOutcfg = pushpull
GPinput = false
IOMnum = 5
CEnum = 0
CEpol = low
pin
name = IOM5_MISO
desc = I/O Master 5 SPI MISO signal.
pinnum = 49
func_sel = AM_HAL_PIN_49_M5MISO
IOMnum = 5
pin
name = IOM5_MOSI
desc = I/O Master 5 SPI MOSI signal.
pinnum = 47
func_sel = AM_HAL_PIN_47_M5MOSI
drvstrength = 12
IOMnum = 5
pin
name = IOM5_SCK
desc = I/O Master 5 SPI SCK signal.
pinnum = 48
func_sel = AM_HAL_PIN_48_M5SCK
drvstrength = 12
IOMnum = 5
pin
name = IOM5_SCL
desc = I/O Master 5 I2C clock signal.
pinnum = 48
func_sel = AM_HAL_PIN_48_M5SCL
GPOutcfg = opendrain
drvstrength = 12
pullup = 1_5K
IOMnum = 5
pin
name = IOM5_SDA
desc = I/O Master 5 I2C data signal.
pinnum = 49
func_sel = AM_HAL_PIN_49_M5SDAWIR3
GPOutcfg = opendrain
drvstrength = 12
pullup = 1_5K
IOMnum = 5
# *****************************************************************************
# MSPI pins.
# *****************************************************************************
pin
name = MSPI_CE0
desc = MSPI chip select.
pinnum = 19
func_sel = AM_HAL_PIN_19_NCE19
drvstrength = 12
intdir = lo2hi
GPOutcfg = pushpull
GPinput = false
IOMnum = 6
CEnum = 0
CEpol = low
pin
name = MSPI_CE1
desc = MSPI chip select.
pinnum = 41
func_sel = AM_HAL_PIN_41_NCE41
drvstrength = 12
intdir = lo2hi
GPOutcfg = pushpull
GPinput = false
IOMnum = 6
CEnum = 1
CEpol = low
pin
name = MSPI_D0
desc = MSPI data 0.
pinnum = 22
func_sel = AM_HAL_PIN_22_MSPI0
drvstrength = 8
intdir = lo2hi
IOMnum = 6
pin
name = MSPI_D1
desc = MSPI data 1.
pinnum = 26
func_sel = AM_HAL_PIN_26_MSPI1
drvstrength = 8
intdir = lo2hi
IOMnum = 6
pin
name = MSPI_D2
desc = MSPI data 2.
pinnum = 4
func_sel = AM_HAL_PIN_4_MSPI2
drvstrength = 8
intdir = lo2hi
IOMnum = 6
pin
name = MSPI_D3
desc = MSPI data 3.
pinnum = 23
func_sel = AM_HAL_PIN_23_MSPI13
drvstrength = 8
intdir = lo2hi
IOMnum = 6
pin
name = MSPI_D4
desc = MSPI data 4.
pinnum = 0
func_sel = AM_HAL_PIN_0_MSPI4
drvstrength = 8
intdir = lo2hi
IOMnum = 6
pin
name = MSPI_D5
desc = MSPI data 5.
pinnum = 1
func_sel = AM_HAL_PIN_1_MSPI5
drvstrength = 8
intdir = lo2hi
IOMnum = 6
pin
name = MSPI_D6
desc = MSPI data 6.
pinnum = 2
func_sel = AM_HAL_PIN_2_MSPI6
drvstrength = 8
intdir = lo2hi
IOMnum = 6
pin
name = MSPI_D7
desc = MSPI data 7.
pinnum = 3
func_sel = AM_HAL_PIN_3_MSPI7
drvstrength = 8
intdir = lo2hi
IOMnum = 6
pin
name = MSPI_SCK
desc = MSPI clock.
pinnum = 24
func_sel = AM_HAL_PIN_24_MSPI8
drvstrength = 12
intdir = lo2hi
IOMnum = 6
# *****************************************************************************
# IOS pins.
# *****************************************************************************
pin
name = IOS_CE
desc = I/O Slave chip select.
pinnum = 3
func_sel = AM_HAL_PIN_3_SLnCE
GPinput = true
CEnum = 0
CEpol = low
pin
name = IOS_MISO
desc = I/O Slave SPI MISO signal.
pinnum = 2
func_sel = AM_HAL_PIN_2_SLMISO
drvstrength = 12
pin
name = IOS_MOSI
desc = I/O Slave SPI MOSI signal.
pinnum = 1
func_sel = AM_HAL_PIN_1_SLMOSI
GPinput = true
pin
name = IOS_SCK
desc = I/O Slave SPI SCK signal.
pinnum = 0
func_sel = AM_HAL_PIN_0_SLSCK
GPinput = true
pin
name = IOS_SCL
desc = I/O Slave I2C clock signal.
pinnum = 0
func_sel = AM_HAL_PIN_0_SLSCL
GPinput = true
pin
name = IOS_SDA
desc = I/O Slave I2C data signal.
pinnum = 1
func_sel = AM_HAL_PIN_1_SLSDAWIR3
GPOutcfg = opendrain
pullup = 1_5K
# *****************************************************************************
# ITM pins.
# *****************************************************************************
pin
name = ITM_SWO
desc = ITM Serial Wire Output.
pinnum = 33
func_sel = AM_HAL_PIN_33_SWO
drvstrength = 2
# *****************************************************************************
# CORE pins.
# *****************************************************************************
pin
name = SWDCK
desc = Cortex Serial Wire DCK.
pinnum = 20
func_sel = AM_HAL_PIN_20_SWDCK
pin
name = SWDIO
desc = Cortex Serial Wire DIO.
pinnum = 21
func_sel = AM_HAL_PIN_21_SWDIO
Reference in New Issue Copy Permalink