* ARMeilleure: Add AVX512{F,VL,DQ,BW} detection
Add `UseAvx512Ortho` and `UseAvx512OrthoFloat` optimization flags as
short-hands for `F+VL` and `F+VL+DQ`.
* ARMeilleure: Add initial support for EVEX instruction encoding
Does not implement rounding, or exception controls.
* ARMeilleure: Add `X86Vpternlogd`
Accelerates the vector-`Not` instruction.
* ARMeilleure: Add check for `OSXSAVE` for AVX{2,512}
* ARMeilleure: Add check for `XCR0` flags
Add XCR0 register checks for AVX and AVX512F, following the guidelines
from section 14.3 and 15.2 from the Intel Architecture Software
Developer's Manual.
* ARMeilleure: Remove redundant `ReProtect` and `Dispose`, formatting
* ARMeilleure: Move XCR0 procedure to GetXcr0Eax
* ARMeilleure: Add `XCR0` to `FeatureInfo` structure
* ARMeilleure: Utilize `ReadOnlySpan` for Xcr0 assembly
Avoids an additional allocation
* ARMeilleure: Formatting fixes
* ARMeilleure: Fix EVEX encoding src2 register index
> Just like in VEX prefix, vvvv is provided in inverted form.
* ARMeilleure: Add `X86Vpternlogd` acceleration to `Vmvn_I`
Passes unit tests, verified instruction utilization
* ARMeilleure: Fix EVEX register operand designations
Operand 2 was being sourced improperly.
EVEX encoded instructions source their operands like so:
Operand 1: ModRM:reg
Operand 2: EVEX.vvvvv
Operand 3: ModRM:r/m
Operand 4: Imm
This fixes the improper register designations when emitting vpternlog.
Now "dest", "src1", "src2" arguments emit in the proper order in EVEX instructions.
* ARMeilleure: Add `X86Vpternlogd` acceleration to `Orn_V`
* ARMeilleure: PTC version bump
* ARMeilleure: Update EVEX encoding Debug.Assert to Debug.Fail
* ARMeilleure: Update EVEX encoding comment capitalization
* Implement JIT Arm64 backend
* PPTC version bump
* Address some feedback from Arm64 JIT PR
* Address even more PR feedback
* Remove unused IsPageAligned function
* Sync Qc flag before calls
* Fix comment and remove unused enum
* Address riperiperi PR feedback
* Delete Breakpoint IR instruction that was only implemented for Arm64
* ARMeilleure: Add AVX512{F,VL,DQ,BW} detection
Add `UseAvx512Ortho` and `UseAvx512OrthoFloat` optimization flags as
short-hands for `F+VL` and `F+VL+DQ`.
* ARMeilleure: Add initial support for EVEX instruction encoding
Does not implement rounding, or exception controls.
* ARMeilleure: Add `X86Vpternlogd`
Accelerates the vector-`Not` instruction.
* ARMeilleure: Add check for `OSXSAVE` for AVX{2,512}
* ARMeilleure: Add check for `XCR0` flags
Add XCR0 register checks for AVX and AVX512F, following the guidelines
from section 14.3 and 15.2 from the Intel Architecture Software
Developer's Manual.
* ARMeilleure: Increment InternalVersion
* ARMeilleure: Remove redundant `ReProtect` and `Dispose`, formatting
* ARMeilleure: Move XCR0 procedure to GetXcr0Eax
* ARMeilleure: Add `XCR0` to `FeatureInfo` structure
* ARMeilleure: Utilize `ReadOnlySpan` for Xcr0 assembly
Avoids an additional allocation
* ARMeilleure: Formatting fixes
* ARMeilleure: Add `GFNI` detection
This is intended for utilizing the `gf2p8affineqb` instruction
* ARMeilleure: Add `gf2p8affineqb`
Not using the VEX or EVEX-form of this instruction is intentional. There
are `GFNI`-chips that do not support AVX(so no VEX encoding) such as
Tremont(Lakefield) chips as well as Jasper Lake.
13df339fe7/GenuineIntel/GenuineIntel00806A1_Lakefield_LC_InstLatX64.txt (L1297-L1299)13df339fe7/GenuineIntel/GenuineIntel00906C0_JasperLake_InstLatX64.txt (L1252-L1254)
* ARMeilleure: Add `gfni` acceleration of `Rbit_V`
Passes all `Rbit_V*` unit tests on my `i9-11900k`
* ARMeilleure: Add `gfni` acceleration of `S{l,r}i_V`
Also added a fast-path for when the shift amount is greater than the
size of the element.
* ARMeilleure: Add `gfni` acceleration of `Shl_V` and `Sshr_V`
* ARMeilleure: Increment InternalVersion
* ARMeilleure: Fix Intrinsic and Assembler Table alignment
`gf2p8affineqb` is the longest instruction name I know of. It shouldn't
get any wider than this.
* ARMeilleure: Remove SSE2+SHA requirement for GFNI
* ARMeilleure Add `X86GetGf2p8LogicalShiftLeft`
Used to generate GF(2^8) 8x8 bit-matrices for bit-shifting for the `gf2p8affineqb` instruction.
* ARMeilleure: Append `FeatureInfo7Ecx` to `FeatureInfo`
* Turn `MemoryOperand` into a struct
* Remove `IntrinsicOperation`
* Remove `PhiNode`
* Remove `Node`
* Turn `Operand` into a struct
* Turn `Operation` into a struct
* Clean up pool management methods
* Add `Arena` allocator
* Move `OperationHelper` to `Operation.Factory`
* Move `OperandHelper` to `Operand.Factory`
* Optimize `Operation` a bit
* Fix `Arena` initialization
* Rename `NativeList<T>` to `ArenaList<T>`
* Reduce `Operand` size from 88 to 56 bytes
* Reduce `Operation` size from 56 to 40 bytes
* Add optimistic interning of Register & Constant operands
* Optimize `RegisterUsage` pass a bit
* Optimize `RemoveUnusedNodes` pass a bit
Iterating in reverse-order allows killing dependency chains in a single
pass.
* Fix PPTC symbols
* Optimize `BasicBlock` a bit
Reduce allocations from `_successor` & `DominanceFrontiers`
* Fix `Operation` resize
* Make `Arena` expandable
Change the arena allocator to be expandable by allocating in pages, with
some of them being pooled. Currently 32 pages are pooled. An LRU removal
mechanism should probably be added to it.
Apparently MHR can allocate bitmaps large enough to exceed the 16MB
limit for the type.
* Move `Arena` & `ArenaList` to `Common`
* Remove `ThreadStaticPool` & co
* Add `PhiOperation`
* Reduce `Operand` size from 56 from 48 bytes
* Add linear-probing to `Operand` intern table
* Optimize `HybridAllocator` a bit
* Add `Allocators` class
* Tune `ArenaAllocator` sizes
* Add page removal mechanism to `ArenaAllocator`
Remove pages which have not been used for more than 5s after each reset.
I am on fence if this would be better using a Gen2 callback object like
the one in System.Buffers.ArrayPool<T>, to trim the pool. Because right
now if a large translation happens, the pages will be freed only after a
reset. This reset may not happen for a while because no new translation
is hit, but the arena base sizes are rather small.
* Fix `OOM` when allocating larger than page size in `ArenaAllocator`
Tweak resizing mechanism for Operand.Uses and Assignemnts.
* Optimize `Optimizer` a bit
* Optimize `Operand.Add<T>/Remove<T>` a bit
* Clean up `PreAllocator`
* Fix phi insertion order
Reduce codegen diffs.
* Fix code alignment
* Use new heuristics for degree of parallelism
* Suppress warnings
* Address gdkchan's feedback
Renamed `GetValue()` to `GetValueUnsafe()` to make it more clear that
`Operand.Value` should usually not be modified directly.
* Add fast path to `ArenaAllocator`
* Assembly for `ArenaAllocator.Allocate(ulong)`:
.L0:
mov rax, [rcx+0x18]
lea r8, [rax+rdx]
cmp r8, [rcx+0x10]
ja short .L2
.L1:
mov rdx, [rcx+8]
add rax, [rdx+8]
mov [rcx+0x18], r8
ret
.L2:
jmp ArenaAllocator.AllocateSlow(UInt64)
A few variable/field had to be changed to ulong so that RyuJIT avoids
emitting zero-extends.
* Implement a new heuristic to free pooled pages.
If an arena is used often, it is more likely that its pages will be
needed, so the pages are kept for longer (e.g: during PPTC rebuild or
burst sof compilations). If is not used often, then it is more likely
that its pages will not be needed (e.g: after PPTC rebuild or bursts
of compilations).
* Address riperiperi's feedback
* Use `EqualityComparer<T>` in `IntrusiveList<T>`
Avoids a potential GC hole in `Equals(T, T)`.
* Start of the ARMeilleure project
* Refactoring around the old IRAdapter, now renamed to PreAllocator
* Optimize the LowestBitSet method
* Add CLZ support and fix CLS implementation
* Add missing Equals and GetHashCode overrides on some structs, misc small tweaks
* Implement the ByteSwap IR instruction, and some refactoring on the assembler
* Implement the DivideUI IR instruction and fix 64-bits IDIV
* Correct constant operand type on CSINC
* Move division instructions implementation to InstEmitDiv
* Fix destination type for the ConditionalSelect IR instruction
* Implement UMULH and SMULH, with new IR instructions
* Fix some issues with shift instructions
* Fix constant types for BFM instructions
* Fix up new tests using the new V128 struct
* Update tests
* Move DIV tests to a separate file
* Add support for calls, and some instructions that depends on them
* Start adding support for SIMD & FP types, along with some of the related ARM instructions
* Fix some typos and the divide instruction with FP operands
* Fix wrong method call on Clz_V
* Implement ARM FP & SIMD move instructions, Saddlv_V, and misc. fixes
* Implement SIMD logical instructions and more misc. fixes
* Fix PSRAD x86 instruction encoding, TRN, UABD and UABDL implementations
* Implement float conversion instruction, merge in LDj3SNuD fixes, and some other misc. fixes
* Implement SIMD shift instruction and fix Dup_V
* Add SCVTF and UCVTF (vector, fixed-point) variants to the opcode table
* Fix check with tolerance on tester
* Implement FP & SIMD comparison instructions, and some fixes
* Update FCVT (Scalar) encoding on the table to support the Half-float variants
* Support passing V128 structs, some cleanup on the register allocator, merge LDj3SNuD fixes
* Use old memory access methods, made a start on SIMD memory insts support, some fixes
* Fix float constant passed to functions, save and restore non-volatile XMM registers, other fixes
* Fix arguments count with struct return values, other fixes
* More instructions
* Misc. fixes and integrate LDj3SNuD fixes
* Update tests
* Add a faster linear scan allocator, unwinding support on windows, and other changes
* Update Ryujinx.HLE
* Update Ryujinx.Graphics
* Fix V128 return pointer passing, RCX is clobbered
* Update Ryujinx.Tests
* Update ITimeZoneService
* Stop using GetFunctionPointer as that can't be called from native code, misc. fixes and tweaks
* Use generic GetFunctionPointerForDelegate method and other tweaks
* Some refactoring on the code generator, assert on invalid operations and use a separate enum for intrinsics
* Remove some unused code on the assembler
* Fix REX.W prefix regression on float conversion instructions, add some sort of profiler
* Add hardware capability detection
* Fix regression on Sha1h and revert Fcm** changes
* Add SSE2-only paths on vector extract and insert, some refactoring on the pre-allocator
* Fix silly mistake introduced on last commit on CpuId
* Generate inline stack probes when the stack allocation is too large
* Initial support for the System-V ABI
* Support multiple destination operands
* Fix SSE2 VectorInsert8 path, and other fixes
* Change placement of XMM callee save and restore code to match other compilers
* Rename Dest to Destination and Inst to Instruction
* Fix a regression related to calls and the V128 type
* Add an extra space on comments to match code style
* Some refactoring
* Fix vector insert FP32 SSE2 path
* Port over the ARM32 instructions
* Avoid memory protection races on JIT Cache
* Another fix on VectorInsert FP32 (thanks to LDj3SNuD
* Float operands don't need to use the same register when VEX is supported
* Add a new register allocator, higher quality code for hot code (tier up), and other tweaks
* Some nits, small improvements on the pre allocator
* CpuThreadState is gone
* Allow changing CPU emulators with a config entry
* Add runtime identifiers on the ARMeilleure project
* Allow switching between CPUs through a config entry (pt. 2)
* Change win10-x64 to win-x64 on projects
* Update the Ryujinx project to use ARMeilleure
* Ensure that the selected register is valid on the hybrid allocator
* Allow exiting on returns to 0 (should fix test regression)
* Remove register assignments for most used variables on the hybrid allocator
* Do not use fixed registers as spill temp
* Add missing namespace and remove unneeded using
* Address PR feedback
* Fix types, etc
* Enable AssumeStrictAbiCompliance by default
* Ensure that Spill and Fill don't load or store any more than necessary
