This enforce speaker mode to avoid weird audio quality reduction with
output considered as headphones by Windows (It applies a HRTF or crossfeed filter supposed to improve audio quality, might be a bug on their end)
* Revise SystemInfo
Cleans up and adds a bit more info (logical core count and available mem at launch) to logs.
- Extract CPU name from CPUID when supported.
- Linux: Robust parsing of procfs files
- Windows: Prefer native calls to WMI
- Remove unnecessary virtual specifiers
* Address gdkchan's comments
* Address AcK's comments
* Address formatting nits
* ci: Use Github artifacts for PRs
This PR extends the build job by upload artifacts for all PRs.
The version of those builds is set to "1.0.0-<git_short_hash>" and those
builds have the updater explicitly disabled.
With this in place, we will be able to disable ApppVeyor on PRs.
* Add actions to comment build links
As Github doesn't provide links to unlogged users, we use nightly.link for that.
* Address Ac_k's comments
* Haydn: Part 1
Based on my reverse of audio 11.0.0.
As always, core implementation under LGPLv3 for the same reasons as for Amadeus.
This place the bases of a more flexible audio system while making audout & audin accurate.
This have the following improvements:
- Complete reimplementation of audout and audin.
- Audin currently only have a dummy backend.
- Dramatically reduce CPU usage by up to 50% in common cases (SoundIO and OpenAL).
- Audio Renderer now can output to 5.1 devices when supported.
- Audio Renderer init its backend on demand instead of keeping two up all the time.
- All backends implementation are now in their own project.
- Ryujinx.Audio.Renderer was renamed Ryujinx.Audio and was refactored because of this.
As a note, games having issues with OpenAL haven't improved and will not
because of OpenAL design (stopping when buffers finish playing causing
possible audio "pops" when buffers are very small).
* Update for latest hexkyz's edits on Switchbrew
* audren: Rollback channel configuration changes
* Address gdkchan's comments
* Fix typo in OpenAL backend driver
* Address last comments
* Fix a nit
* Address gdkchan's comments
* Fix updater breaking user run permissions on *nix
The updater currently sets the permissions to user run only when the yes button is clicked, this changes it to run on Updater.cs after it's done updating as it should.
* Fix nits
* Use multiple threads to download different chunks of an update simultaneously. This reduces time to complete the download significantly.
* Remove dirty-flag check (for test purposes)
* Clean up updater code.
* Include fallback to single-threaded updater if mt fails
* Reduce connection count to 4.
* Improve fallback on error.
Correct issue where data was missing during download due to total build size not being cleanly divisble by the connection count.
Cleaned up unnecessary code.
* Add missing return statements
* Fix alignment
* Alignment
* More alignment
* Rely on content-range request instead of xml/json size property.
* Re-instate dirty checking and version checking to move into review stage.
* Address comments
* Address comments
* Comments
* Comments
* Final...?
* final final
* final final final nit
* Use Array.Copy as requested by rip
* Updated some names for clarity.
* Move addition into for loop (to shorten line width)
* Add missing semicolon -- forgot to stage :9
* This should fix issue #1374 in Linux
Changes:
- Bind buttons by detecting the transition from down to up.
- Bind axis by detecting movement from value higher than 50% to a value lower than 50%.
Caveats:
- I have tested only with DS3 in Linux (Fedora 32).
- ZL and ZR detection works by accident. This code doesn't take negative axis into account.
The reason it works is because axis are managed in absolute value. So when pressing ZL/ZR
axis value goes from -1 to 1 (or 1 to 0 and back to 1) and this hits the axis detector.
- Likely I have broken all the other controllers xD (testing needed).
* Assign keyboardPressed
* Make a more robust detection of pressed buttons when using a controller
* Add interface to bind buttons from Joystick and Keyboard
* Fix style issues after code review by @AcK77 (Thanks!)
* Move new classes to Ryujinx.Ui.Input namespace
* Use explicit types instead of var
* Update Ryujinx/Ui/Input/JoystickButtonAssigner.cs
Co-authored-by: Mary <thog@protonmail.com>
* Update Ryujinx/Ui/Input/JoystickButtonAssigner.cs
Co-authored-by: Mary <thog@protonmail.com>
* Update Ryujinx/Ui/Input/JoystickButtonAssigner.cs
Co-authored-by: Mary <thog@protonmail.com>
* Update Ryujinx/Ui/Input/JoystickButtonAssigner.cs
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* Add a new empty line before
* Up
Co-authored-by: Jose Padilla <jose@prensalink.com>
Co-authored-by: Mary <thog@protonmail.com>
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* Make Windows DPI aware to display properly on high-resolution screens.
* remove empty line
* Don't use app manifest, set process dpi aware programatically.
Store variables in Program.cs for use instead of re-creating them per class/ method.
* Fix for linux/osx
* Add braces
* Re-use manifest. It appears to be required on linux.
* Undo previous commit -- it appears linux was simply never affected.
* Addressed AcK's comments
* Remove unused usings
* Address comments by AcK #2
* Re-order
* Move FromHwnd call to ForceDpiAware class. Wrap in Try-Catch to prevent crashes on systems that don't support it.
* Additional code cleanup
* Remove "global::" reference.
* Implement "Hide Cursor On Idle" option
Adds a general option to autohide the cursor after 8s have elapsed.
* Fix cursor not hiding on Windows and dispose it
* Don't dispose cursor, fix var names
* Abide by the GNOME documentation
* Fix nits
* Disabled by default, make it so it doesn't utilize any timer
* Remove *NIX time and extra lines
* Don't calculate if option is disabled
* Move if case
* Fix alignment
* Update Joy-Con Images 2
This Updates the Joy-Con images, Changes include, adding a top view to the {Joy-Con Pair} image and {Joy-Con Left and Right} Images and adding a side view to {Joy-Con Left and Right} images, the colours
should be less washed out as well and I also decided to clean up the raw image because even though you could not see it in the GUI, the Images themselves looked very messy when opened in a Vector tool
* Fix Sily Right Joy Con mistake
* Make ZL and ZR more visable
- Bind toggle events after setting up their current values. This fixes the issue where the config is saved 10 times when the main window is opened 😬
- Write to disk immediately to decrease the chances of corruption
* Initial Setup: Reload keys before verifying firmware
Also, display the NoKeys dialog if keyset is empty when verifying
firmware.
* LoadApplications: Remove the lone debug log and print the error directly
Currently, when configuring controller input with an "Xinput Controller" or "Unmapped Controller", the window does not fit the images for Pro Controller (width limited) or Joycon Pair (width and height limited). This PR proportionally enlarges the window so that no scrolling is ever necessary to fully see the controller image.
This updates the old Images used for the input section for Ryujinx. The old one didn't play nice with the some GTK themes like light mode, this new one does.
Fixes the crashes on linux when you stop emulation, and when you try to
exit the emulator while a game is running.
Also tested on windows without problems on my side.
* gui: Refactoring Part 1
* Fix ProfileDialog.glade path
* Fix Application.Quit assert
* Fix TitleUpdateWindow parent
* Fix TitleUpdate selected item
* Remove extra line in TitleUpdateWindow
* Fix empty assign of Enum.TryParse
* Add Patrons list in the About Window
* update about error messages
* Enable Profiled Persistent Translation Cache (PPTC) by default
Enables PPTC by default. Enough time has passed and enough games tested that it should be the preferred setting for 99.9% of games. In case we are worried about PPTC files being put on the user's disk, shader cache already does this by default and generates about the same size files on average, so this should no longer be a concern.
* Update config.json with PTC set to true
* Updated _schema.json to set PPTC to true.
* Distribute with OpenAL Soft on Windows
This remove dependency on OpenAL EA on Windows and allows to operate with both backend without any user interventions.
Co-authored-by: jduncanator <jduncanator@hotmail.com>
* Fix Atmosphere utf8 issue
Co-authored-by: jduncanator <jduncanator@hotmail.com>
A small code change to fix the issue that was forcing the user to press the "Yes" button twice to restart Ryujinx after it had been updated, instead of only once.
* Interrupt GPU command processing when a frame's fence is reached.
* Accumulate times rather than %s
* Accurate timer for vsync
Spin wait for the last .667ms of a frame. Avoids issues caused by signalling 16ms vsync. (periodic stutters in smo)
* Use event wait for better timing.
* Fix lazy wait
Windows doesn't seem to want to do 1ms consistently, so force a spin if we're less than 2ms.
* A bit more efficiency on frame waits.
Should now wait the remainder 0.6667 instead of 1.6667 sometimes (odd waits above 1ms are reliable, unlike 1ms waits)
* Better swap interval 0 solution
737 fps without breaking a sweat. Downside: Vsync can no longer be disabled on games that use the event heavily (link's awakening - which is ok since it breaks anyways)
* Fix comment.
* Address Comments.
* am/gui: Implement Wake-up message.
This implement the ability to send a Wake-up (Resume) message to the guest.
Sometime games needs to Sleep and Wake-up the switch to unlock some ingame features.
* Address gdkchan feedback
* Thread create/delete stutter workarounds Pt 1
* As tiered compilation is disabled, disable quick jit too
Should result in tier 1 compilation all the time
* Fix rebase.
* Rewrite scheduler context switch code
* Fix race in UnmapIpcRestorePermission
* Fix thread exit issue that could leave the scheduler in a invalid state
* Change context switch method to not wait on guest thread, remove spin wait, use SignalAndWait to pass control
* Remove multi-core setting (it is always on now)
* Re-enable assert
* Remove multicore from default config and schema
* Fix race in KTimeManager
* IPC refactor part 2: Use ReplyAndReceive on HLE services and remove special handling from kernel
* Fix for applet transfer memory + some nits
* Keep handles if possible to avoid server handle table exhaustion
* Fix IPC ZeroFill bug
* am: Correctly implement CreateManagedDisplayLayer and implement CreateManagedDisplaySeparableLayer
CreateManagedDisplaySeparableLayer is requires since 10.x+ when appletResourceUserId != 0
* Make it exit properly
* Make ServiceNotImplementedException show the full message again
* Allow yielding execution to avoid starving other threads
* Only wait if active
* Merge IVirtualMemoryManager and IAddressSpaceManager
* Fix Ro loading data from the wrong process
Co-authored-by: Thog <me@thog.eu>
This is an issue happening when you change your datetime format on your
system and try to sort via last played datetime. DateTime.Parse use the
current thread culture and will not parse date correctly, effectively
causing a crash.
As such, I added a check when loading the game list that ensure that the
datetime is valid in current culture.
Fix#1727.
* gui: Toggle between docked/handheld mode by clicking status bar
This PR just add a way to toggle between the docked and the handheld mode by clicking the lable in the status bar.
Nothing more.
* Fix glade file formatting
* Add VSync toggle
* shader cache: Fix Linux boot issues
This rollback the init logic back to previous state, and replicate the
way PTC handle initialization.
* shader cache: set default state of ready for translation event to false
* Fix cpu unit tests
