Added functionality that allows ExeFS mods to compile to their own PPTC
Profile and therefore store PTC data between sessions.
The feature calculates the hash of the currently loaded ExeFS mods and
stores the PPTC data in a profile that matches said hash, so you can
have multiple ExeFS loadouts without causing issues. This includes
different versions of the same mod as their hashes will be different.
Using this PR should be seamless as the JIT Sparse PR already laid the
groundwork for PPTC Profiles and this PR just allows ExeFS mods to load
and store their own profiles besides the `default` profile.
❗❗❗ **WARNING!** ❗❗❗
**This will update your PPTC profile version, which means the
PPTC profile will be invalidated if you try to run a PR/Build/Branch
that does not include this change!**
**This is only relevant for the default PPTC Profile, as any other profiles do not exist to older versions!**
A couple of games have random crashing with the JIT Sparse Ftable changes, and it seems to have been caused by an insufficient int size returned by `AddressTableLevel#GetValue(ulong address)`.
It was 32 bits (Int32), but the GiantBlock (which is the current address table impl) uses potentially 36 bits for the first level.
More up to date build of the JIT Sparse PR for continued development.
JIT Sparse Function Table was originally developed by riperiperi for the
original Ryujinx project, and decreased the amount of layers in the
Function Table structure, to decrease lookup times at the cost of
slightly higher RAM usage.
This PR rebalances the JIT Sparse Function Table to be a bit more RAM
intensive, but faster in workloads where the JIT Function Table is a
bottleneck. Faster RAM will see a bigger impact and slower RAM (DDR3 and
potentially slow DDR4) will see a slight performance decrease.
This PR also implements a base for a PPTC profile system that could
allow for PPTC with ExeFS mods enabled in the future.
This PR also potentially fixes a strange issue where Avalonia would time
out in some rare instances, e.g. when running ExeFS mods with TotK and a
strange controller configuration.
---------
Co-authored-by: Evan Husted <gr33m11@gmail.com>
This is an implementation of the TPIDR2_EL0 register. There may be more
potential use-cases for this register not included in this PR, but this
implements the use-case seen in SuperTuxKart.
Specifically, this setting causes the translation load core count to get reduced by two-thirds, for lower-power but still fast loading, and for unstable CPUs.
TryDequeue checks for _disposed before taking the lock. If another
thread calls Dispose before it takes the lock, it won't get woken up by
the PulseAll call, and will deadlock in Monitor.Wait.
Double-checking _disposed with the lock taken should avoid this.
* Add host tracked memory manager mode
* Skipping flush is no longer needed
* Formatting + revert unrelated change
* LightningJit: Ensure that dest register is saved for load ops that do partial updates
* avoid allocations when doing address space lookup
Add missing improvement
* IsRmwMemory -> IsPartialRegisterUpdateMemory
* Ensure we iterate all private allocations in range
* PR feedback and potential fixes
* Simplified bridges a lot
* Skip calling SignalMappingChanged if Guest is true
* Late map bridge too
* Force address masking for prefetch instructions
* Reprotection for bridges
* Move partition list validation to separate debug method
* Move host tracked related classes to HostTracked folder
* New HostTracked namespace
* Move host tracked modes to the end of enum to avoid PPTC invalidation
---------
Co-authored-by: riperiperi <rhy3756547@hotmail.com>
* WIP: Separate guest/host tracking + unaligned protection
Allow memory manager to define support for single byte guest tracking
* Formatting
* Improve docs
* Properly handle cases where the address space bits are too low
* Address feedback
* Cpu: Implement Vpadal and Vrintr instructions
This PR superseed last instructions left in #2242.
Since I'm not a CPU guy I've just ported the code and nothing more.
Please be precise during review if there are some changes to be done.
It should fixes#1781
Co-Authored-By: Piyachet Kanda <piyachetk@gmail.com>
* Addresses gdkchan's feedback
* Addresses gdkchan's feedback 2
* Apply suggestions from code review
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* another fix
* Update InstEmitSimdHelper32.cs
* Correct fix
* Addresses gdkchan's feedback
* Update CpuTestSimdCvt32.cs
---------
Co-authored-by: Piyachet Kanda <piyachetk@gmail.com>
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* Implement a new JIT for Arm devices
* Auto-format
* Make a lot of Assembler members read-only
* More read-only
* Fix more warnings
* ObjectDisposedException.ThrowIf
* New JIT cache for platforms that enforce W^X, currently unused
* Remove unused using
* Fix assert
* Pass memory manager type around
* Safe memory manager mode support + other improvements
* Actual safe memory manager mode masking support
* PR feedback
* Move most of signal handling to Ryujinx.Cpu project
* Format whitespace
* Remove unused member
* Format whitespace
* This does not need to be public anymore
* Change TargetFramework to net8.0
* Disable info messages
* Fix warings
* Disable additional analyzer messages
* Fix typo
* Add whitespace
* Fix ref vs in warnings
* Use explicit [In] on array parameters
* No need to guard Remove with Contains
* Use 'ArgumentOutOfRangeException.ThrowIf...' instead of explicitly throwing a new exception instance
* Bump .NET SDK version
* Enable JsonSerializerIsReflectionEnabledByDefault
* Use 8.0.100 GA release
* Bump System package versions
---------
Co-authored-by: Zoltan Csizmadia <Zoltan.Csizmadia@vericast.com>
* Strings should not be concatenated using '+' in a loop
* fix IDE0090
* undo GenerateLoadOrStore
* prefer string interpolation
* Update src/Ryujinx.Graphics.Shader/CodeGen/Glsl/Instructions/InstGen.cs
Co-authored-by: Mary <thog@protonmail.com>
---------
Co-authored-by: Mary <thog@protonmail.com>
* GPU: Don't create tracking handles for buffer textures
Buffer texture memory is handled by the buffer cache - the texture shouldn't create any tracking handles as they aren't used. This change simply makes them create and iterate 0 tracking handles, while keeping the rest of the texture group around.
This prevents a possible issue where many buffer textures are created as views of overlapping buffer ranges, and virtual regions have many dependant textures that don't actually contribute anything to handle state.
Should improve performance in Mortal Kombat 1, possibly certain UE4 games when FIFO raises to 100%.
* Fix interval tree bug
* Don't check view compatibility for buffer textures
* Add workflow to perform automated checks for PRs
* Downgrade Microsoft.CodeAnalysis to 4.4.0
This is a workaround to fix issues with dotnet-format.
See:
- https://github.com/dotnet/format/issues/1805
- https://github.com/dotnet/format/issues/1800
* Adjust editorconfig to be more compatible with Ryujinx code-style
* Adjust .editorconfig line endings to match .gitattributes
* Disable 'prefer switch expression' rule
* Remove naming styles
These are the default rules, so we don't need to override them.
* Silence IDE0060 in .editorconfig
* Slightly adjust .editorconfig
* Add lost workflow changes
* Move .editorconfig comment to the top
* .editorconfig: private static readonly fields should be _lowerCamelCase
* .editorconfig: Remove alignment for declarations as well
* editorconfig: Add rule for local constants
* Disable CA1822 for HLE services
* Disable CA1822 for ViewModels
Bindings won't work with static members, but this issue is silently ignored.
* Run dotnet format for the whole solution
* Check result code of SDL_GetDisplayBounds
* Fix dotnet format style issues
* Add missing trailing commas
* Update Microsoft.CodeAnalysis.CSharp to 4.6.0
Skipping 4.5.0 since it breaks dotnet format
* Restore old default naming rules for dotnet format
* Add naming rule exception for CPU tests
* checks: Include all files before excluding paths
* Fix dotnet format issues
* Check dotnet format version
* checks: Run dotnet format with severity info again
* checks: Disable naming style rules until they won't crash the process anymore
* Remove unread private member
* checks: Attempt to run analyzers 3 times before giving up
* checks: Enable naming style rules again with the new retry logic
